Christie Digital Systems Lx400 User Manual

39
SCREEN Menu
SCREEN Menu (continued)
Item Description
START UPUsing the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected.
MyScreen 
 ORIGINAL 
 TURN OFF
    
Feature
MyScreenScreen can be registered by the MyScreen item 
(40).
ORIGINAL Screen preset as the standard screen.
TURN OFF Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
screen will change to the BLANK...

40
SCREEN Menu
Item Description
MyScreenThis item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1.  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from the 
current screen.
Please wait for the target image to be displayed, and press 
the ENTER button on the remote control when the image is...

41
Item Description
MESSAGEUsing the ▲/▼ buttons turns on/off the message function.
TURN ON 
 TURN OFF
When the TURN ON is selected, the following message function works.“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“Searching….” while searching for the input
“Detecting….” while an input signal is detected
The indication of the input signal displayed by changing 
The indication of the aspect ratio displayed by changing
The indication of the PICTURE MODE...

42
OPTION Menu
OPTION Menu
From the OPTION menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor button 
on the projector or remote control, or ENTER button on 
the remote control to execute the item, except for the 
items LAMP TIME and FILTER TIME. Then perform it 
according to the following table.
Item Description
AUTO SEARCH
Using the ▲/▼ buttons turns on/off the automatic signal search function....

43
OPTION Menu
Item Description
AUTO OFFUsing the ▲/▼ buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes) 
 Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projector's buttons or the remote control buttons 
is pressed...

44
OPTION Menu
Item Description
MY BUTTONThis item is to assign one of the following function to MY BUTTON 
1 and 2 on the remote control (
6).Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then 
using the ▲/▼ buttons sets one of the following functions to the chosen button.
• RGB1: Sets port to RGB1.
• RGB2: Sets port to RGB2.
• HDMI: Sets port to HDMI.
• COMPONENT: Sets port to COMPONENT (Y, C
B/PB, CR/PR).
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
•  INFORMATION:...

45
OPTION Menu
Item Description
SERVICE
(continued)AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. 
When the DISABLE is selected, the automatic 
adjustment feature is disabled.
FINE 
 FAST 
 DISABLE
      
FINE: Finer tuning including H.SIZE adjustment.
FAST:  Faster tuning, setting H.SIZE to prearranged data for the input signal.
• Depending on conditions, such as input image, signal cable to the projector, 
environment around the projector, etc., the automatic adjustment may not 
work...

46
OPTION Menu
Item Description
SERVICE
(continued)KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When 
TURN ON is selected, the buttons on the projector except the 
STANDBY/ON button are locked.
TURN ON 
 TURN OFF
• Please use to avoid a mischief and touching accidentally. This 
function does not have any effect on the remote control.
REMOTE RECEIV.
(1) Select a remote sensor using the ▲/▼ button.
1:FRONT 
 2:TOP 
 3:REAR
         
(2) Switch it using the ENTER or INPUT button....

47
OPTION Menu
Item Description
SECURITYThis projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  Use the ▲/▼ buttons on the OPTION 
menu to select SECURITY and press the ► 
button. The ENTER PASSWORD box will be 
displayed. The factory default PASSWORD is 
4204. This PASSWORD can be changed (1.2 
Changing the PASSWORD). 
• It is strongly recommended...

48
OPTION Menu
Item Description
SECURITY
(continued)1.3 If you have forgotten your PASSWORD
1.3-1  Follow the procedure in 1.1-1 to display the 
ENTER PASSWORD BOX.
1.3-2  While the ENTER PASSWORD BOX is 
displayed, press and hold the RESET button 
on the remote control for about 3 seconds or 
press and hold the INPUT and ► buttons on 
the projector for about 3 seconds. 
The 10 digit Inquiring Code will be displayed.
• If there is no key input for about 55 seconds while 
the Inquiring Code is displayed...