Christie Digital Systems Lx400 User Manual

19
Operating
• When the vertical lens shift 
is adjusted, it is recommended to shift 
the picture upward. NOTE
1.Use the zoom ring to adjust the screen size.
Adjusting the zoom and focus
2.Use the focus ring to focus the picture.
 ESC  MENU  RESET
  
 POSITION  AUTO 
 
 MAGNIFY 
MY BUTTON VOLUME
 ENTER
 PAGE UP   PAGE DOWN
2/5 
1/10 
1/10 
Zoom ringFocus ring
To p
1.Use the vertical lens shift dial to shift 
the picture upward or downward.
Adjusting the lens shift
2.Use the horizontal lens shift dial to...

20
Operating
1.Press the POSITION button on the remote control. 
The “POSITION” indication will appear on the screen.
Adjusting the position
2.Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press the RESET 
button on the remote control during the operation.
To complete this operation, press the POSITION button 
again. Even if you do not do anything, the dialog will 
automatically disappear after a few seconds.
●  
When this function is performed on a...

21
Operating
• The zoom level can be finely adjusted. Closely watch the screen to 
find the level you want. NOTE
 ESC  MENU  RESET
  
 POSITION  AUTO 
 
 MAGNIFY 
MY BUTTON VOLUME
 ON  1
MUTE
 
 MAGNIFY MY BUTTON VOLUME
 ON  1
     MUTE
 OFF  2
 FREEZE  KEYSTONE  SEARCH
 
1.Press the ON button of MAGNIFY on the remote control.  
The “MAGNIFY” indication will appear on the screen and 
the projector will go into the MAGNIFY mode. When the 
ON button of MAGNIFY is pressed first after the projector is 
started,...

22
Operating
BLANK LASER
1.Press the BLANK button on the remote control.  
The blank screen will be displayed instead of the screen of 
input signal. Please refer to the BLANK item in SCREEN 
menu (
38).
To exit from the blank screen and return to the input signal 
screen, press the BLANK button again. 
Temporarily blanking the screen
●  The projector automatically returns to the input signal screen when one of the 
projector’s buttons or the remote control buttons (except ASPECT, POSITION, 
MAGNIFY or...

23
Operating
1.Press the MENU button on the remote control or one of the cursor 
buttons on the projector. 
The Advanced MENU, or EASY MENU that has priority just after 
powered on, will appear. 
If you want to move the menu position, use the cursor buttons after 
pressing the POSITION button. While the projector is displaying any 
menu, the MENU button on the projector works as the cursor buttons.
Using the menu function
2.If you want to change it to the Advanced MENU, select the 
"Go to Advanced...

24
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control. Then perform it according to 
the following table.
Item Description
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu
 (29).
AUTO 
KEYSTONE 
EXECUTEUsing the ► button executes the auto keystone function.See the AUTO KEYSTONE  EXECUTE item in SETUP menu (35).
KEYSTONE 
Using the ◄/►...

25
EASY MENU
EASY MENU (continued)
Item Description
BRIGHTNESSUsing the ◄/► buttons adjusts the brightness.
See the BRIGHTNESS item in PICTURE menu
 (26).
CONTRAST
Using the ◄/► buttons adjusts the contrast.
See the CONTRAST item in PICTURE menu
 (26).
COLORUsing the ◄/► buttons adjusts the strength of whole color.
See the COLOR item in PICTURE menu
 (27).
TINTUsing the ◄/► buttons adjusts the tint.
See the TINT item in PICTURE menu
 (27).
SHARPNESS
Using the ◄/► buttons adjusts the sharpness.
See...

26
PICTURE Menu
PICTURE Menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor 
button on the projector or remote control, or the ENTER 
button on the remote control to execute the item. Then 
perform it according to the following table.
Item Description
BRIGHTNESSUsing the ▲/▼ buttons adjusts the brightness.
Light 
 Dark
CONTRASTUsing the ▲/▼ buttons adjusts the contrast....

27
PICTURE Menu
PICTURE Menu (continued)
Item Description
COLOR TEMPUsing the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes 
CUSTOM and then pressing the ► button or the 
ENTER button displays a dialog to aid you in 
adjusting the OFFSET and GAIN of the selected 
mode.
OFFSET adjustments change the color intensity 
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity 
on the brighter tones of the test pattern....

28
Item Description
ACTIVE IRISUsing the ▲/▼ cursor buttons changes the active iris control mode.
PRESENTATION  
  THEATER  
  TURN OFF
               
Feature
PRESENTATIONThe active iris displays the best presentation 
image for both bright and dark scenes.
THEATERThe active iris displays the best theater image for 
both bright and dark scenes.
TURN OFF The active iris is always open.
• The screen may flicker when the PRESENTATION or THEATER 
modes are selected. If this occurs select TURN OFF.
MY...