Home > Christie Digital Systems > Projector > Christie Digital Systems Lx400 User Manual

Christie Digital Systems Lx400 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Christie Digital Systems Lx400 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 267 Christie Digital Systems manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							LX400
    USER MANUAL - OPERATING GUIDE
    020-000169-0 
    						
    							1
    Projector
    LX400
    User Manual – Operating Guide
    Thank you for purchasing this projector.
    ►Before using this product, please read the "User's Manual -  
    Safety Guide" and related manuals to ensure the proper use of this product.  
    After reading them, store them in a safe place for future reference.WARNING
    • The information in this manual is subject to change without notice.
    • The manufacturer assumes no responsibility for any errors that may appear in 
    this manual.
    • The reproduction, transfer or copy of all or any part of this document is not 
    permitted without express written consent. NOTE
    Trademark acknowledgment
    •  Windows
    ® is a registered trademark of Microsoft Corporation in the U.S. and/or 
    other countries.
    • VESA and DDC are trademarks of the Video Electronics Standard Association.
    • Mac
    ® is a registered trademark of Apple Inc.
    • DVI is a trademark of Digital Display Working Group.
    •  HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks 
    or registered trademarks of HDMI Licensing LLC.
    • 
     is a trademark of SRS Labs, Inc.
    • WOW technology is incorporated under license from SRS Labs, Inc.
    All other trademarks are the properties of their respective owners. Various symbols are used in this manual. The meanings of these symbols are 
    described below.
    About this manual
    WARNING
    CAUTION
    This symbol indicates information that, if ignored, could possibly 
    result in personal injury or even death due to incorrect handling.
    This symbol indicates information that, if ignored, could possibly 
    result in personal injury or physical damage due to incorrect 
    handling.
    Please refer to the pages written following this symbol.
    
    LX400 User Manual - Operating Guide 020-000169-01 Rev. 1 (04-2009) 
    						
    							2
    Contents
    Contents 
    About this manual ...........1
    Contents  ..................2
    Projector features ...........3
    Preparations ...............3
    Contents of package ............. 3
    Fastening the lens cover .......... 3
    Part names  ................4
    Projector ...................... 4
    Control panel ................... 5
    Rear panel  .................... 5
    Remote control ................. 6
    Setting up  .................7
    Arrangement ................... 8
    Adjusting the projector's elevator  . . . 9
    Using the security bar and slot ..... 9
    Connecting your devices ......... 10
    Connecting power supply ........ 12
    Remote control ............13
    Laser pointer .................. 13
    Putting batteries  ............... 13
    About the remote control signal  . . . 14
    Changing the frequency of remote control signal .14
    Using as a wired remote control . . . 15
    Using as a simple PC mouse & keyboard 15
    Power on/off  ..............16
    Turning on the power  ........... 16
    Turning off the power  ........... 16
    Operating  ................17
    Adjusting the volume ............ 17
    Temporarily muting the sound ..... 17
    Selecting an input signal ......... 17
    Searching an input signal ........ 18
    Selecting an aspect ratio ......... 18
    Adjusting the zoom and focus ..... 19
    Adjusting the lens shift  .......... 19
    Using the automatic adjustment feature .. 19
    Adjusting the position  ........... 20
    Correcting the keystone distortions .. 20
    Using the magnify feature ........ 21
    Freezing the screen  ............ 21
    Temporarily blanking the screen . . . 22
    Using the menu function   ........ 23
    EASY MENU. . . . . . . . . . . . . . . 24
    ASPECT, AUTO KEYSTONE  EXECUTE,
    
    (EASY MENU continued ..........25)
    KEYSTONE , KEYSTONE , PICTURE MODE,  
    BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS,  
    WHISPER, MIRROR, RESET, FILTER TIME,  
    LANGUAGE, Go to Advanced Menu...
    PICTURE Menu  ............26BRIGHTNESS, CONTRAST, GAMMA, COLOR TEMP,  
    COLOR, TINT, SHARPNESS, ACTIVE IRIS, MY MEMORY
    IMAGE Menu  ..............29ASPECT, OVER SCAN, V POSITION, H POSITION,  
    H PHASE, H SIZE, AUTO ADJUST EXECUTE
    INPUT Menu  ..............31PROGRESSIVE, VIDEO NR, 3D-YCS,  
    COLOR SPACE, COMPONENT, VIDEO FORMAT,  
    HDMI, FRAME LOCK, RGB IN, RESOLUTION
    SETUP Menu ..............35
    A
    UTO KEYSTONE  EXECUTE, KEYSTONE ,  KEYSTONE , WHISPER, MIRROR
    AUDIO Menu  ..............37VOLUME, TREBLE, BASS, SRS WOW,  
    SPEAKER, AUDIO, HDMI AUDIO
    SCREEN Menu .............38LANGUAGE, MENU POSITION, BLANK,  
    STA R T UP, MyScreen, MyScreen Lock,  
    MESSAGE, SOURCE NAME
    OPTION Menu  .............42
    A
    UTO SEARCH, AUTO KEYSTONE ,  
    AUTO ON, AUTO OFF, LAMP TIME,  
    FILTER TIME, MY BUTTON, SERVICE,  
    SECURITY
    NETWORK Menu ...........55
    SETUP, PROJECTOR NAME, e-SHOT, 
    INFORMATION, SERVICE
    Maintenance ..............60
    Lamp ........................ 60
    Air filter  ...................... 62
    Internal clock battery ............ 64
    Other care .................... 65
    Troubleshooting  ...........66
    Related messages  ............. 66
    Regarding the indicator lamps  . . . . 67
    Phenomena that may be easy  
       
    to be mistaken for machine defects .. 69
    Warranty and after-ser vice ...72
    Specifications .............72
    
    LX400 User Manual - Operating Guide 020-000169-01 Rev. 1 (04-2009) 
    						
    							3
    Projector features / Preparations
    • Keep the original packing materials for future reshipment. Be sure 
    to use the original packing materials when moving the projector. Use special 
    caution for the lens. NOTE
    Projector features
    This projector is used to project various picture signals onto a screen. This 
    projector requires only a minimal amount of space for installation and can produce 
    a large projected image from even a short distance.
    Preparations
    Contents of  package
    Please see the “Contents of package” in the “User’s Manual (concise)” which 
    is a book. Your projector should come with the items shown there. Contact 
    immediately your dealer if anything is missing.
    Fastening the lens cover
    To avoid losing the lens cover, please fasten the lens cover to the projector using 
    the included strap.
    1.Fix the strap to the strap hole of the lens 
    cover.
    2.Put one side of the strap into the groove on 
    the rivet.
    3.Push the rivet into the rivet hole.
    Strap hole
    Rivet hole
    Bottom
    LX400 User Manual - Operating Guide 020-000169-01 Rev. 1 (04-2009) 
    						
    							4
    Part names
    Part names
    Projector
    (1) Speakers (x 4) (37)
    (2) Focus ring (19)
    (3) Zoom ring (19)
    (4)  Lamp cover (60) 
    The lamp unit is inside.
    (5) Lens shift cover (
    19)
    (6) Horizontal lens shift dial (19)
    (7) Vertical lens shift dial (19)
    (8) Front cover
    (9) Lens (
    65)
    (10) Lens cover (
    3)
    (11) Remote sensors (x 3) (14)
    (12) Elevator feet (x 2) (9)
    (13) Elevator knobs (x 2) (9)
    (14)  Filter cover (
    62) 
    The air filter and intake vent are 
    inside.
    (15) Exhaust vents
    (16) Intake vents
    (17) Rivet hole (
    3)
    (18) Handle
    (19) Battery cover (
    64)
    (20) Control panel (5)
    (21) Rear panel (5)
    ►HOT! : Do not touch around the lamp cover and the exhaust 
    vents during use or just after use, since it is too hot.
    ►Do not look into the lens or vents while the lamp is on, since the strong light is 
    not good for your eyes.
    ►Do not grab the front cover to hold the projector up, since the projector may 
    drop down.
    ►Do not handle the elevator knobs without holding the projector, since the 
    projector may drop down.WARNING
    ►Maintain normal ventilation to prevent the projector from 
    heating up. Do not cover, block or plug up the vents. Do not place anything that 
    can stick or be sucked to the vents, around the intake vents. Clean the air filter 
    periodically.CAUTION
    (2)(3)(1)
    (8)
    (15)
    (12)
    (10)(9)(11)
    (12)(13)(14)(11) (1) (20) (4)
    HOT!
    HOT!
    (7)(6)
    (5)
    (12)
    (12)
    (13) (17) (19)
    (16)
    (20)
    (11)
    (1)
    (1)
    (21)(18)
    LX400 User Manual - Operating Guide 020-000169-01 Rev. 1 (04-2009) 
    						
    							5
    Part names
    Control panel
    (1) STANDBY/ON button (16)
    (2)  MENU button (23) 
    It consists of four cursor buttons.
    (3) INPUT button (
    17)
    (4) POWER indicator (
    16)
    (5) TEMP indicator (67)
    (6) LAMP indicator (67)
    Rear panel
    (1) Shutdown switch (69)
    (2) Security slot (9)
    (3) Security bar (
    9)
    (4) AC inlet (12)
    (5) Power switch (16)
    (6) RGB1 port (
    10)
    (7)  RGB2(G/Y, B/CB/PB, R/CR/PR, H, V) 
    port (
    10)
    (8) CONTROL port (10)
    (9) HDMI port (10)
    (10) VIDEO port (10)
    (11) S-VIDEO port (
    10)
    (12)  COMPONENT 
    (Y, C
    B/PB, CR/PR) ports (10)
    (13) AUDIO IN1 port (10)
    (14) AUDIO IN2 port (10)
    (15) AUDIO IN3 (R/L) ports (
    10)
    (16) AUDIO IN4 (R/L) ports (10)
    (17) RGB OUT port (10)
    (18) AUDIO OUT port (10)
    (19) REMOTE CONTROL port (10)
    (20) LAN port (
    10)
    (21) USB port (10)
    (6)
    (5)
    (4)
    (1) (2) (3)
    ►Do not use the security bar and the security slot to prevent the 
    projector from falling down, since it is not designed for it.
    ►Use the shutdown switch only when the projector is not turned off by normal 
    procedure, since pushing this switch stops operation of the projector without 
    cooling it down.CAUTION
    LAN 
    AC IN 
    I       O 
    VIDEO
    CONTROL AUDIO IN 1
    AUDIO IN 2
    AUDIO OUT
    RGB
     OUTRGB1
    RGB2HDMI
     R             L      R           L
         AUDO IN 3        AUDIO IN 4
    CB/PBY
    CR/PRB/CB/PBB/CR/PRG/Y
    H
    VUSBREMOTE 
    CONTROL
       
    (14) (13) (17) (6) (7)(20) (18) (9) (19) (8)(2) (1)
    (10) (11) (15) (16) (12)
    (5) (4) (3)(21)
    LX400 User Manual - Operating Guide 020-000169-01 Rev. 1 (04-2009) 
    						
    							6
    Part names
    Remote control
    (1)  Laser pointer (13) 
    It is a beam outlet.
    (2) LASER INDICATOR (
    13)
    (3) LASER button (13)
    (4) STANDBY/ON button (
    16)
    (5) VOLUME button (17)
    (6) MUTE button (17)
    (7) VIDEO button (18)
    (8) RGB button (17)
    (9) SEARCH button (18)
    (10) AUTO button (
    19)
    (11) ASPECT button (18) 
    (12) POSITION button (20)
    (13) KEYSTONE button (20)
    (14) MAGNIFY - ON button (
    21)
    (15) MAGNIFY - OFF button (21)
    (16) FREEZE button (
    21)
    (17) BLANK button (22)
    (18) MY BUTTON - 1 button (44)
    (19) MY BUTTON - 2 button (44)
    (20) MENU button (
    23)
    (21)  Lever switch (23) : acting 3 functions as below. 
    Cursor button ▲ : to slide toward the side marked ▲. 
    Cursor button ▼ : to slide toward the side marked ▼. 
    ENTER button : to push down the center point.
    (22) Cursor button ◄ (
    23)
    (23) Cursor button ► (23)
    (24) RESET button (23)
    (25) ESC button (23)
    (26) Mouse left button (15)
    (27) Mouse right button (15)
    (28) PAGE UP button (
    15)
    (29) PAGE DOWN button (15)
    (30) Wired remote control port (15)
    (31) Battery cover (13)
    (32) Battery holder (13)
    (33) Frequency switch (
    14)
    ►Do not look into the beam outlet and 
    point the beam at people and pets while pressing the 
    LASER button, since the beam is not good for eyes.WARNING
    ►Note that the laser beam may result 
    in hazardous radiation exposure. Use the laser pointer 
    only for pointing on the screen.CAUTION
    BLANK LASER
    ASPECT
     ESC  MENU  RESET
      
     POSITION  AUTO 
     
     MAGNIFY 
    MY BUTTON VOLUME
     ON  1
         MUTE
     OFF  2
     FREEZE  KEYSTONE  SEARCH
     
    PUSH ENTER
     PAGE UP   PAGE DOWN
     STANDBY/ON VIDEO  RGBLASER
    INDICATOR
    (11)
    (22)
    (28)
    (20)
    (25)
    (12)
    (14)
    (15)
    (16)
    (13)
    (30)(27)
    (21)
    (23)
    (29)
    (24)
    (10)
    (18)
    (5)
    (6)
    (9)
    (19) (26) (17)(4) (7)(2) (1)
    (3) (8)
    Back of 
    the remote control
    (32)
    (33)
    (31)
    LX400 User Manual - Operating Guide 020-000169-01 Rev. 1 (04-2009) 
    						
    							7
    Setting up
    Setting up
    Install the projector according to the environment and manner the projector will be 
    used in.
    ►Place the projector in a stable horizontal position. If the 
    projector falls or is knocked over it could cause injury and/or damage to the 
    projector. Using a damaged projector could then result in fire and/or electric 
    shock.
    • Do not place the projector on an unstable, slanted or vibrational surface such 
    as a wobbly or inclined stand.
    • Do not place the projector on its side, front or rear position.
    • Consult with your dealer before a special installation such as suspending from 
    a ceiling.
    ►Place the projector in a cool place, and ensure that there is sufficient 
    ventilation. The high temperature of the projector could cause fire, burns and/or 
    malfunction of the projector.
    • Do not stop-up, block or otherwise cover the projector's vents.
    • Keep a space of 30 cm or more between the sides of the projector and other 
    objects such as walls.
    • Do not place the projector on metallic thing or anything weak in heat.
    • Do not place the projector on carpet, cushions or bedding.
    • Do not place the projector in direct sunlight or near hot objects such as heaters.
    • Do not place anything near the projector lens or vents, or on top of the 
    projector.
    • Do not place anything that may be sucked into or stick to the vents on the 
    bottom of the projector. This projector has some intake vents also on the bottom.
    ►Do not place the projector anyplace where it may get wet. Getting the projector 
    wet or inserting liquid into the projector could cause fire, electric shock and/or 
    malfunction of the projector.
    • Do not place the projector in a bathroom or the outdoors.
    • Do not place anything containing liquid near the projector.WARNING
    ►Avoid placing the projector in smoky, humid or dusty place. 
    Placing the projector in such places could cause fire, electric shock and/or 
    malfunction of the projector.
    • Do not place the projector near humidifiers, smoking spaces or a kitchen.
    ►Position the projector to prevent light from directly hitting the projector's remote 
    sensor.CAUTION
    LX400 User Manual - Operating Guide 020-000169-01 Rev. 1 (04-2009) 
    						
    							8
    Setting up
    Arrangement
    Refer to the illustrations and tables below to determine screen size and projection distance.
    The values shown in the table are calculated for a full size screen: 1024×768
    (a) Screen size (diagonal)
    (b) Projection distance (±10%)
    (c) Screen height (±10%), when the vertical lens shift (
    19) is set full upward.
    On a horizontal 
    surface
    Suspended from 
    the ceiling
    • Keep a space of 30 cm or more 
    between the sides of the projector 
    and other objects such as walls.
    • Consult with your dealer before 
    a special installation such as 
    suspending from a ceiling.
    (a) Screen 
    size
    [inch (m)]4 : 3 screen 16 : 9 screen
    (b) Projection distance  
    [m (inch)](c) Screen height
    [cm (inch)](b) Projection distance  
    [m (inch)](c) Screen height 
    [cm (inch)]
    min. max. down up min. max. down up
    30 (0.8) 0.9 (35) 1.1 (42)
    5 (2)
    41 (16)1.0 (38) 1.2 (46)
    -1 (0) 39 (15)
    40 (1.0) 1.2 (47) 1.4 (57) 6 (2) 55 (22) 1.3 (51) 1.6 (62) -2 (-1) 51 (20)
    60 (1.5) 1.8 (71) 2.2 (86) 9 (4) 82 (32) 2.0 (78) 2.4 (94) -2 (-1) 77 (30)
    70 (1.8) 2.1 (83) 2.6 (100) 11 (4) 96 (38) 2.3 (91) 2.8 (110) -3 (-1) 90 (35)
    80 (2.0) 2.4 (96) 2.9 (115) 12 (5) 110 (43) 2.6 (104) 3.2 (126) -3 (-1) 103 (41)
    90 (2.3) 2.7 (108) 3.3 (130) 14 (5) 123 (49) 3.0 (117) 3.6 (141) -4 (-1) 116 (46)
    100 (2.5) 3.0 (120) 3.7 (144) 15 (6) 137 (54) 3.3 (131) 4.0 (157) -4 (-2) 129 (51)
    120 (3.0) 3.7 (144) 4.4 (174) 18 (7) 165 (65) 4.0 (157) 4.8 (189) -5 (-2) 154 (61)
    150 (3.8) 4.6 (181) 5.5 (217) 23 (9) 206 (81) 5.0 (197) 6.0 (237) -6 (-2) 193 (76)
    200 (5.1) 6.1 (241) 7.4 (291) 30 (12) 274 (108) 6.7 (263) 8.0 (317) -8 (-3) 257 (101)
    250 (6.4) 7.7 (302) 9.2 (364) 38 (15) 343 (135) 8.4 (329) 10.1 (396) -10 (-4) 322 (127)
    300 (7.6) 9.2 (363) 11.1 (437) 46 (18)411 (162)
    10.0 (395) 12.1 (476)-12 (-5) 386 (152)
    350 (8.9) 10.8 (424) 13.0 (510) 53 (21) 480 (189) 11.7 (462) 14.1 (556) -15 (-6) 450 (177)
    (a)
    (a)(b)
    (b) (c) up
    (c) down
    (c) down
    (c) up
    LX400 User Manual - Operating Guide 020-000169-01 Rev. 1 (04-2009) 
    						
    All Christie Digital Systems manuals Comments (0)

    Related Manuals for Christie Digital Systems Lx400 User Manual