Casio Qt6000 Service Manual

— 79 —
Perform proper operation.
Return the mode to its original setting.
Input correct check number or assign the
proper clerk.
Reallocate memory.
Close cash drawer.
Replace journal paper.
Replace receipt paper.
Check the internal R/J printer.
Switch to another mode and then back to
the REF/REG– mode again.
Input a check number.
Input a table number.
Enter the number of customers.
Input a seat number.
Perform stock maintenance.
Perform stock maintenance.
Re-enter the PLU code.
Finalize the transaction....

— 80 —
Action Meaning
Prompt message
E051 CHK/TBL No. is
occupied.
E052 CHK/TBL No. is Busy.
E053 CHK/TBL No. is not
opened.
E054 Out of CHK/TBL No.
Range.
E056 Store range full.
E057 No item exists in detail.
E058 Enter post entry item.
E059 Press Eat-in or Take-out
key.
**********
E060 Printer offline.
**********
E061 Printer error
**********
E061 Printer error.
YES:Retry to print.
NO :Backup to R/J printer.
ESC:Discard data.
**********
E062 Printer paper end.
**********
E062 Printer paper end....

— 81 —
Action Meaning
Prompt message
**********
E073 Your receipt/order may
not be issued.
YES:Retry to print.
NO :Backup to R/J printer.
ESC:Discard data.
E075 Negative Balance,
cannot be finalized.
E080 Electronic Journal Full
Please clear E-Journal.
E082 ***** Illegal Data *****
E083 Cannot create E-
Journal.
Check Flash memory.
**********
E105 Check/TBL tracking
Master down. Please
call Manager!!
YES:Retry for connection.
NO :Remove it from system.
**********
E106 Check/TBL tracking
Backup master...

— 82 —
Action Meaning
Prompt message
E140 Wrong menu.
E141 Press 
twice before finalization.
E145 Arrangement syntax
error.
E150 Incorrect value entry.
E151 Incorrect Key Pressed.
E152 PGM File or Memory
number does not Exist.
E164 Employee No. is not
Found in the Employee
File.
E165 Employee No. is not
Clocking-in.
E166 Employee No. is
Occupied.
E167 Incorrect Job code.
E168 Your Operation is out of
Schedule.
Please Call Manager.
E169 Work Hours Exceeded.
Please Call Manager.
E170 No Shift Remains in...

— 83 —
Action Meaning
Prompt message
E200 Insert CF Card.
E201 Format error.
E203 Insufficient memory.
E205 The file already exists.
Do you replace?
YES:Replace the file.
NO :Input new name.
E240 Customer No. is
occupied.
E241 Customer memory full.
E242 Customer not found.
E243 Illegal Site ID.
E244 Credit limit over.
E251 Magnetic card error.
E252 Enter customer name.
E253 Enter address.
E254 Enter phone number.
CF card is not inserted to the slot.
CF card data or formats illegal.
Insufficient memory is...

— 84 —
9-2 Operation prompt
All prompt messages, together with descriptors and symbol characters for displaying / printing are
contained in the list below. These messages cannot be added, modified or deleted.
Meaning
Prompt message
Data cannot be printed out.
Backup to R/J printer?
Do you want to clear data?
Cancel OK?
Please wait.
Item Consolidation Mode
Non Consolidation Mode
REG Mode
REFUND Mode
REG- Mode
Training
REG2 Mode
Please Sign on.
Enter Check/Table Number.
Enter Table Number.
Enter Number of...

— 85 —
9-3 System error code
All error codes are contained in the list below. These error codes are displayed or printed on error log
report.
Error code Meaning
0010 Handler access error (software)
0011 Cannot execute handler (system configuration)
0012 Break by PC
0013 Break by ECR
0014 DSR off before receiving command packet
0015 Receive illegal command number of command packet
0016 Receive illegal character
0017 Send error (hardware)
0018 Receive error (hardware)
0019 Receive illegal data packet
0020...

— 86 —
Error code Meaning
0079 Z lock release error on satellite terminal
0081 Check tracking master is removed from system.
0082 Check tracking backup master is removed from system.
0128 Parameter error / Maximum length of send error
0130 Error drive
0134 Network parameter error
0138 Detect error in core system
0140 Parameter error (record length exceeds work buffer)
0141 EOF over
0144 Calculation overflow
0145 Undefined value of n_open () mode
0146 Mismatch of type when closing network
0147 Parameter...

— 87 —
9-4. OS Fatal Error
When a fatal error occurs during an operation of the operating system, normal operation becomes
impossible afterwards.
Therefore, the OS displays a message as shown below and stops the operation of ECR.
Such errors include errors of the OS (ITRON) itself, driver system errors, etc.
The values of Error No. and Error Code vary according to errors.
* These are intentional system halting errors to prevent a system runaway due to software. Types of errors
may be increased in the...

— 88 —
4 Description of Errors
(1) Semaphore acquisition error
Error No. -1 / -4 / -6
Description of phenomenon:
This is a system error in ITRON.
This phenomenon may occur when the exclusion function of ITRON is used.
Possible causes:
A software bug or an illegal operation of ITRON.
(2) Mailbox creation error
Error No. -2 / -3 / -5 / -7 / -21
Description of phenomenon:
This is a system error in ITRON.
This phenomenon may occur when a function of ITRON called Mailbox is used.
Possible causes:
A software...