Casio Exilim EX Z5 User Manual

							BASIC IMAGE RECORDING
71
Specifying Image Size
“Image size” is the size of the image, expressed as the
number of vertical and horizontal pixels. A “pixel” is one of
the many tiny dots that make up the image. More pixels
provide finer detail when an image is printed, but a higher
pixel count also causes the image’s file size to be larger.
You can select an image size to suit your needs for greater
detail or smaller file size.
Note that this setting is valid for snapshots only. For
information about movie image size, see page 103.
1.In the REC mode, press [MENU].
2.Use [] and [] to select the “Quality” tab.
3.Use [
] and [] to select “Size”, and then
press [].
*“M” stands for “Mega.”
4.Use [
] and [] to select the setting you
want, and then press [SET].
When selecting the image size, the image size value
(pixels) will alternate on the display with a
corresponding print size. The print size indicates the
optimum paper size when you print an image that is
the image size you select.
Print Size
A3 Print
A3 Print (3:2 horizontal-to-
vertical ratio)
A4 Print
A4 Print
3.5˝ ×
 5˝ Print
E-mail (optimum size when
attaching image to e-mail)Larger
Smaller
2560 ×
 1920
2560 ×
 1712
(3:2)
2304 ×
 1728
2048 ×
 1536
1600 ×
 1200
640 ×
 480
5M*
5M
(3:2)
4M
3M
2M
VGA
Image Size
Downloaded From camera-usermanual.com Casio Manuals 
						

							BASIC IMAGE RECORDING
72
Specifying Image Quality
Compressing an image before storage can cause a
deterioration of its quality. The more an image is
compressed, the greater the loss of quality. The image
quality setting specifies the compression ratio to be used
when an image is stored in memory. You can select an
image quality setting to suit your needs for higher quality or
smaller file size.
• Note that this setting is valid for snapshots only. For
information about movie image quality, see page 103.
1.In the REC mode, press [MENU].
2.Use [] and [] to select the “Quality” tab.
3.Use [
] and [] to select “ Quality”, and
then press [].
4.Use [
] and [] to select the setting you
want, and then press [SET].
• The above print sizes are all approximate values when
printing at a resolution of 200 dpi (dots per inch). Use a
larger setting when you want to print at a higher
resolution or when you plan to produce a larger size print.
• In order to obtain the level of resolution for which your
camera is designed, recording at a maximum image size
(5M) is recommended. Use a smaller image size when
you want to conserve memory capacity.
• Selecting the “5M (3:2) (2560 ×
 1712 (3:2))” image size
records images with a 3:2 (horizontal:vertical) aspect
ratio, which is optimal for printing on photographic paper
with an aspect ratio of 3:2.
Downloaded From camera-usermanual.com Casio Manuals 
						

							BASIC IMAGE RECORDING
73
 IMPORTANT! 
• Actual file size depends on the type of image you
record. This means that the remaining image
capacity noted on the monitor screen may not be
exactly accurate (pages 26, 247).
Fine
Normal
Economy
To get this:
Higher
Quality
Lower
Quality
Select this setting:
High image quality, large file
size
Normal image quality and
normal file size
Low image quality, small file
size
Downloaded From camera-usermanual.com Casio Manuals 
						

							OTHER RECORDING FUNCTIONS
74
OTHER RECORDING FUNCTIONS
Selecting the Focus Mode
You can select one of five different focus modes: Auto
Focus, Macro, Pan Focus, Infinity, and Manual Focus.
1.In the REC mode, press [MENU].
2.Select the “REC” tab, select “Focus”, and
then press [].
3.Use [
] and [] to select the setting you
want, and then press [SET].
To do this:
Adjusts focus automatically
•Auto Focus cannot be selected
during movie recording.
Close-up recording
•During movie recording, Macro
mode uses fixed focus that is
optimized for macro recording.
Focus adjusted on a certain
subject distance
Infinity recording
Manual focus recording
Select this setting:
 (Auto Focus)
 Macro (Close-up)
 (Pan Focus)
 (Infinity)
 (Manual Focus)
Focus mode indicator•This causes the focus mode
indicator to appear on the
display.
 IMPORTANT! 
•You can use the key customization feature (page
112) to switch the focus mode whenever you press
[] or [] while recording a snapshot or movie.
Downloaded From camera-usermanual.com Casio Manuals 
						

							OTHER RECORDING FUNCTIONS
75
ISO50ISO50F3.1F3.11/10001000
Using Auto Focus
As its name suggests, Auto Focus focuses the image
automatically. The automatic focus operation starts when
you press the shutter button down half way. The following
is the Auto Focus range.
Range: 40cm to ∞ (1.3´ to ∞)
•Using optical zoom causes the above range to change.
1.In the REC mode, press [MENU].
2.Select the “REC” tab, select “Focus”, and
then press [].
3.Use [
] and [] to select “”, and then
press [SET].
4.Compose the image so the main subject is
within the focus frame, and then press the
shutter button half way.
•You can tell whether the image is focused by
observing the focus frame and the operation lamp.
Focus frame
When you see this:
Green focus frame
Green operation lamp
Red focus frame
Flashing green operation lamp
It means this:
The image is focused.
The image is not
focused.
5.Press the shutter button the rest of the way to
record the image.
Operation lamp
Downloaded From camera-usermanual.com Casio Manuals 
						

							OTHER RECORDING FUNCTIONS
76
 NOTE 
•When proper focusing is not possible because the
subject is closer than the Auto Focus range, the
camera automatically switches to the Macro mode
range (page 78).
• Whenever you perform an optical zoom operation
(page 59) while recording with Auto Focus, a value
will appear on the monitor screen as shown below to
tell you the focusing range.
Example: AF 

cm - ∞
*

 will be replaced by the actual focusing range value.
 IMPORTANT! 
• Auto Focus cannot be selected during movie
recording.

Quick Shutter
When Quick Shutter is turned on, the camera immediately
records the image without waiting for Auto Focus to be
performed when you press the shutter release all the way
down. This helps to avoid missing a special moment while
you wait for the camera to Auto Focus.
1.In the REC mode, press [MENU].
2.Select the “REC” tab, select “Quick Shutter”,
and then press [].
3.Use [
] and [] to select the setting you
want, and then press [SET].
To do this:
Turn on Quick Shutter
Turn off Quick Shutter
Select this setting:
On
Off
Downloaded From camera-usermanual.com Casio Manuals 
						

							OTHER RECORDING FUNCTIONS
77

Specifying the Auto Focus Area
You can use the following procedure to change the Auto
Focus area used in the Auto Focus mode and the Macro
mode. Note that the configuration of the focus frame
changes in accordance with the Auto Focus area you
select.
1.In the REC mode, press [MENU].
2.On the “REC” tab, select “AF Area”, and then
press [].
3.Use [
] and [] to select the Auto Focus area
you want, and then press [SET].
For this type of Auto Focus area:
Very limited range in the center of the
screen
•This setting works well with focus lock
(page 81).
Automatic selection of the focus area where
the subject closest to the camera is located
•With this setting, a wide focus frame,
which contains nine focus points, appears
on the monitor screen first. When you
press the shutter button half way, all of the
focus frames that are in focus among the
nine focus points become green.
•This setting works well for group photos.
Select this:
 Spot
 Multi
• Spot• Multi
Focus frame Focus frame
Downloaded From camera-usermanual.com Casio Manuals 
						

							OTHER RECORDING FUNCTIONS
78
Using the Macro Mode
Use the Macro mode when you need to focus on close up
subjects. The following shows the approximate focus range
in the Macro mode.
Range: 10cm to 50cm (3.9˝ to 19.7˝)
•Using optical zoom causes the above range to change.
1.In the REC mode, press [MENU].
2.Select the “REC” tab, select “Focus”, and
then press [].
3.Use [
] and [] to select “ Macro”, and
then press [SET].
4.Press the shutter button to record the image.
•The focus and image recording operations are
identical to those in the Auto Focus mode.
 NOTE 
•When the Macro mode cannot focus properly
because the subject is too far away, the camera
automatically switches to the Auto Focus range
(page 76).
•Whenever you perform an optical zoom operation
(page 59) while recording with the Macro mode, a
value will appear on the monitor screen as shown
below to tell you the focusing range.
Example: 
 

cm - 

cm*

 will be replaced by the actual focusing range value.
 IMPORTANT! 
•Use of the flash along with the Macro mode can
cause the light of the flash to become blocked, which
can produce unwanted lens shadows in your image.
•During movie recording, Macro mode uses fixed
focus that is optimized for macro recording.
Downloaded From camera-usermanual.com Casio Manuals 
						

							OTHER RECORDING FUNCTIONS
79
Using Pan Focus
Pan Focus comes in handy when recording under
conditions where Auto Focus is difficult for some reason, or
in cases where Auto Focus operation noise is too
noticeable in the movie audio.
1.In the REC mode, press [MENU].
2.Select the “REC” tab, select “Focus”, and
then press [].
3.Use [
] and [] to select “”, and then
press [SET].
4.Press the shutter button to record the image.
 NOTE 
•If you press the shutter button half way, the focus
distance will appear on the monitor screen.
Example: 

m - 

m
*

 will be replaced by the actual focusing range value.
Using the Infinity Mode
The Infinity mode fixes focus at infinity (∞). Use this mode
when recording scenery and other faraway images.
1.In the REC mode, press [MENU].
2.Select the “REC” tab, select “Focus”, and
then press [].
3.Use [
] and [] to select “”, and then
press [SET].
4.Press the shutter button to record the image.
Downloaded From camera-usermanual.com Casio Manuals 
						

							OTHER RECORDING FUNCTIONS
80
•Using optical zoom causes the above range to change.
1.In the REC mode, press [MENU].
2.Select the “REC” tab, select “Focus”, and
then press [].
3.Use [
] and [] to
select “
”, and then
press [SET].
•At this point, a
boundary also appears
on the display,
indicating the part of the
image that will be used
for manual focus.
Using Manual Focus
With the Manual Focus mode, you can adjust the focus of
an image manually. The following shows focus range in the
Manual Focus mode.
Boundary
Optical Zoom Factor
1X
3X
Approximate Focus Range
10cm (3.9˝) to infinity (∞)
60cm (23.6˝) to infinity (∞)
•Pressing [] or [] causes the area inside of the
boundary displayed in step 1 to fill the monitor
screen momentarily to aid in focus. The normal
image will reappear a short while later.
•If you do not adjust the focus of the enlarged image,
it will return automatically to step 3. If this happens
and you still want to adjust the focus, press [SET] to
display the enlarged image again.
To do this:
Focus in on the subject
Focus out on the subject
Do this:
Press [].
Press [].
Manual focus position
4.Press [SET].
5.While watching the
image on the monitor
screen, use [] and
[] to focus.
Downloaded From camera-usermanual.com Casio Manuals