Casio Exilim EX Z5 User Manual

							INTRODUCTION
11
• Color Correction (page 131)
Simply record the image of an old photograph to restore
its colors.
• MOTION PRINT (page 138)
Capture frames from a movie and create still images that
are suitable for printing.
• Calendar screen (page 140)
A simple operation displays a full-month calendar on the
camera’s monitor screen. Each day of the full-month
calendar shows a thumbnail of the first file recorded for
that date, which helps to make searching for a particular
file quicker and easier.
• Connect the camera to a TV and use the TV screen for
image recording and viewing (page 148)
• World Time (page 165)
A simple operation sets the current time for your current
location. You can select from among 162 cities in 32 time
zones.
• Support for SD memory cards and MMC (MultiMedia
Cards) for memory expansion (page 171)• Digital Print Order Format (DPOF) (page 179)
Images can be printed easily in the sequence you want
using a DPOF compatible printer. DPOF can also be used
when specifying images and quantities for printing by
professional print services.
• PictBridge and USB DIRECT-PRINT support
(page 183)
Connect directly to a PictBridge or USB DIRECT-PRINT
compatible printer and you can print images without going
through a computer.
• PRINT Image Matching III Compatible (page 188)
Images include PRINT Image Matching 
III data (mode
setting and other camera setup information). A printer that
supports PRINT Image Matching 
III reads this data and
adjusts the printed image accordingly, so your images
come out just the way you intended when you recorded
them.
• Transfer images to a computer simply by connecting
the camera (pages 189, 196)
• DCF Data Storage (page 201)
DCF (Design rule for Camera File system) data storage
protocol provides image compatibility between the digital
camera and printers.
Downloaded From camera-usermanual.com Casio Manuals 
						

							INTRODUCTION
12
Precautions

 General Precautions
Be sure to observe the following important precautions
whenever using the EX-Z5.
All references in this manual to “camera” refer to the
CASIO EX-Z5 Digital Camera.
• Never try to take pictures or use the built-in display while
operating a motor vehicle or while walking. Doing so
creates the risk of serious accident.
• Never try to open the case of the camera or attempt your
own repairs. High-voltage internal components create the
risk of electric shock when exposed. Always leave
maintenance and repair work up to a CASIO authorized
service center.
• Keep the small parts and accessories of this camera out
of the reach of small children. If swallowed accidentally,
contact your physician immediately.
• Never fire the flash in the direction of a person operating
a motor vehicle. Doing so can interfere with the driver’s
vision and create the risk of accident. • Bundled with Photo Loader and Photohands
(pages 208, 211, 217)
Your camera comes bundled with Photo Loader, the
popular application that automatically loads images from
your camera to your PC. It also comes with Photohands,
and application that makes image retouching quick and
easy.
Downloaded From camera-usermanual.com Casio Manuals 
						

							INTRODUCTION
13
• Never fire the flash while it is too close to the subject’s
eyes. Intense light from the flash can cause eye damage
if it is fired too close to the eyes. This is especially true
with young children. When using the flash, the camera
should be at least one meter (3.3´) from the eyes of the
subject.
• Keep the camera away from water and other liquids, and
never let it get wet. Moisture creates the risk of fire and
electric shock. Never use the camera outdoors in the rain
or snow, at the seashore or beach, in the bathroom, etc.
• Should foreign matter or water ever get into the camera,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC power cord from the power outlet,
and contact your dealer or nearest CASIO authorized
service center. Using the camera under these conditions
creates the risk of fire and electric shock.
• Should you ever notice smoke or a strange odor coming
out of the camera, immediately turn it off. Next, taking
care you do not burn your fingers, remove the camera’s
battery and/or unplug the AC power cord from the power
outlet, and contact your dealer or nearest CASIO
authorized service center. Using the camera under these
conditions creates the risk of fire and electric shock. After
making sure there is no more smoke coming from the
camera, take it to your nearest CASIO authorized service
center for repair. Never attempt your own maintenance.• At least once a year, unplug the AC power cord from the
power outlet and clean the area around the prongs of the
plug. Dust build up around the prongs can create the risk
of fire.
• If the camera’s case should ever become cracked due to
dropping it or otherwise subjecting it to rough treatment,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC power cord from the power outlet,
and contact your dealer or nearest CASIO authorized
service center.
• Never use the camera inside of an aircraft or in any other
area where its use is prohibited. Doing so creates the risk
of accident.
• Physical damage and malfunction of this camera can
cause the data stored in its memory to be deleted. Always
keep backup copies of data by transferring them to
personal computer memory.
• Never open the battery cover while an image is being
recorded. Doing so will not only make storage of the
current image impossible, it can also corrupt other image
data already stored in file memory.
Downloaded From camera-usermanual.com Casio Manuals 
						

							INTRODUCTION
14

Test for proper operation before using the
camera!
Before using the camera to record important images, make
sure you first record a number of test images and check the
results to ensure that the camera is configured correctly
and operating properly.

Data Error Precautions
• Your digital camera is manufactured using precision
digital components. Any of the following creates the risk
of corruption of data in file memory.
— Removing the battery or memory card while the
camera is performing a record or memory access
operation
— Removing the battery, removing the memory card
while the operation lamp is still flashing green after
you turn off the camera
— Disconnecting the USB cable while a data
communication operation is being performed
— Low battery power
— Other abnormal operations
Any of the above conditions can cause an error message to
appear on the monitor screen (page 232). Follow the
instructions provided by the message to eliminate the
cause of the error.
Downloaded From camera-usermanual.com Casio Manuals 
						

							INTRODUCTION
15

Operating conditions
• This camera is designed for use in temperatures ranging
from 0°C to 40°C (32°F to 104°F).
• Do not use or keep the camera in the following areas.
— In areas subject to direct sunlight
— In areas subject to high humidity or dust
— Near air conditioners, heaters, or other areas subject
to temperature extremes
— Inside of a closed vehicle, especially one parked in the
sun
— In areas subject to strong vibration

Condensation
• When you bring the camera indoors on a cold day or
otherwise expose it to a sudden change of temperature,
there is the possibility that condensation can form on the
exterior or on interior components. Condensation can
cause malfunction of the camera, so you should avoid
exposing it to conditions that might cause condensation.
• To keep condensation from forming, place the camera
into a plastic bag before moving it into a location that is
much warmer or colder than your current location. Leave
it in the plastic bag until the air inside the bag has a
chance to reach the same temperature as the new
location. If condensation does form, remove the battery
from the camera and leave the battery cover open for a
few hours.
Downloaded From camera-usermanual.com Casio Manuals 
						

							INTRODUCTION
16

Power Supply
• Use only the special NP-20 rechargeable lithium ion
battery to power this camera. Use of any other type of
battery is not supported.
• This camera does not have a separate battery for the
clock. The date and time will reset whenever the camera
is not supplied power by the battery for about 30 hours.
Be sure to reconfigure these settings after power is
interrupted (page 163).
• Never remove the battery from the camera while the
camera is turned on. Doing so can damage the camera. If
you mistakenly remove the battery, immediately reinsert it
into the camera and press the power button to turn power
back on.

Lens
• Never apply too much force when cleaning the surface of
the lens. Doing so can scratch the lens surface and cause
malfunction.
• You may sometimes notice some distortion in certain
types of images, such as a slight bend in lines that should
be straight. This is due to the characteristics of lens, and
does not indicate malfunction of the camera.

Caring for your camera
• Fingerprints, dust, or any other soiling of the lens can
interfere with proper image recording. Never touch the
lens with your fingers. You can remove dust particles
from the lens surface by using a lens blower to blow them
off. Next, wipe the surface of the lens with a soft lens
cloth.
• Fingerprints, dirt, and other foreign matter on the flash
can interfere with proper operation of the camera. Avoid
touching the flash. If the flash becomes dirty, wipe it clean
with a soft, dry cloth.
• If the exterior of the camera needs cleaning, wipe it with a
soft, dry cloth.

Other
• The camera may become slightly warm during use. This
does not indicate malfunction.
Downloaded From camera-usermanual.com Casio Manuals 
						

							QUICK START GUIDE
17
QUICK START GUIDE
First, charge the battery!
[CHARGE] lamp lights red
during charging.
[CHARGE] lamp goes out
when charging is complete.
T-+
21
1.Charge the rechargeable litium
ion battery (NP-20) that comes
with the camera (page 31).
It takes about 90 minutes to achieve
a full charge.
2.Load the battery into the camera.
(page 34).
1
2
3
Stopper
Downloaded From camera-usermanual.com Casio Manuals 
						

							QUICK START GUIDE
18
1.Press the power button to turn on the camera.
2.Use [
], [], [], and [] to select the language
you want.
3.Press [SET] to register the language setting.
4.Use [
], [], [], and [] to select the geographical
area you want, and then press [SET].
5.Use [
] and [] to select the city you want, and
then press [SET].
6.Use [
] and [] to select the summer time (DST)
setting you want, and then press [SET].
7.Use [
] and [] to select the date format setting
you want, and then press [SET].
8.Set the date and the time.
9.Press [SET] to register the clock settings and exit
the setting screen.
To configure display language and clock settings
• Be sure to configure the following settings before
using the camera to record images.
See page 47 for details.
• If you make a mistake when setting the language or
clock with the following procedure, you will need to
use the camera’s menu to individually change the
language (page 167) or clock (page 163) settings.
[
]
[]
[][]
[SET]
2, 3, 4, 5, 6, 7, 8, 9
1
Downloaded From camera-usermanual.com Casio Manuals 
						

							QUICK START GUIDE
19
To record an image
See page 50 for details.
1.Press [] (REC).
This enters the REC (recording) mode.
2.Point the camera at the subject, use the monitor
screen to compose the image, and then press
the shutter button half way.
When the camera finishes its Auto Focus operation, the
focus frame will turn green and the operation lamp lights
green.
3.Holding the camera still, gently press the shutter
button all the way down.
1
3
23N
0606/1212/24241212:
3838
5
Operation lamp Focus frame Auto recording icon
Before using a commercially available memory
card, be sure to first format it using the camera’s
formatting procedure. For details about formatting
a memory card, see page 174.
Downloaded From camera-usermanual.com Casio Manuals 
						

							QUICK START GUIDE
20
1.Press [] (PLAY).
2.Press [] ( ).
3.Use [] and [] to display the image you want to
delete.
4.Use [
] and [] to select “Delete”.
To exit the image delete operation without deleting anything,
select “Cancel”.
5.Press [SET] to delete the image.
To delete an image
See page 152 for details.
1.Press [] (PLAY).
This enters the PLAY (playback) mode.
2.Use [] and [] to scroll through the
images.
To view a recorded image
See page 124 for details.
1
2
1
2, 3, 4, 5
Downloaded From camera-usermanual.com Casio Manuals