Casio Exilim EX Z5 User Manual

							APPENDIX
231
If you have problems installing the USB driver...
You may not be able to install the USB driver properly if you use the USB cable to connect the camera to a computer running
Windows 98SE/98 before installing the USB driver from the bundled CD-ROM, or if you have another type of driver installed.
This will make it impossible for the computer to recognize the digital camera when it is connected. If this happens, you will
need to re-install the camera’s USB driver. For information about how to re-install the USB driver, see the USB driver’s “Read
me” file on the CD-ROM that comes bundled with the camera.
Downloaded From camera-usermanual.com Casio Manuals 
						

							APPENDIX
232
Display Messages
Battery is low.
Cannot correct
image!
Can not find the file.
Cannot register any
more files.
Card ERROR
The battery is dead.
Keystone correction cannot be performed for some
reason. The image will be stored as-is, without
correction (pages 98, 100).
The camera cannot find a image specified by the
slideshow “Images” setting. Specify another image
(page 141).
•You are attempting to save a BEST SHOT scene
when there are already 999 scenes in the
“SCENE” folder (page 93).
•You are attempting to copy a FAVORITE file
when the “FAVORITE” folder already contains
9999 files (page 157).
Some problem occurred with the memory card.
Turn off the camera, and remove and then reinsert
the memory card. If the same message appears,
format the memory card (page 174).
 IMPORTANT! Formatting the memory card deletes all files on
the memory card. Before formatting, try
transferring recoverable files to a computer or
some other storage device.
Check connections!
File could not be
saved because
battery is low.
Folder cannot be
created.
LENS ERROR
Load paper!
Memory Full
No Favorites file!
•You are attempting to connect the camera to a
printer while the camera’s USB settings are not
compatible with the USB system of the printer
(page 168).
•You are attempting to connect to a computer that
does not have a USB driver installed (page 189).
The battery is dead, so the recorded image could
not be saved.
This message appears when you try to record an
image while there are 9,999 files stored in the
999th folder. If you want to record more files,
delete files you no longer need (page 152).
This message appears and the camera turns off
whenever lens performs some unexpected
operation. If the same message appears after you
turn power back on, contact your retailer or a
CASIO service center.
The camera is in the Printer mode, and the printer
is out of paper.
Memory is full. If you want to record more files,
delete files you no longer need (page 152).
There is no FAVORITE file.
Downloaded From camera-usermanual.com Casio Manuals 
						

							APPENDIX
233
One of the following problems occurred during
printing.
•Printer power off
•Printer internal error
Image compression could not be performed during
image data storage for some reason. Record the
image again.
The camera is in the Printer mode, and the printer
is running low on ink or is out of ink.
If the lens comes into contact with some obstacle,
this message appears and the camera turns off. Take
action to remove the obstacle, and try turning on
power again.
Your camera system is corrupted. Contact your
retailer or a CASIO service center.
The LOCK switch of the SD memory card is locked.
You cannot store images to or delete images from
a memory card that is locked.
•There are no files in built-in memory or on the
memory card.
•This message will appear if you rename the files
or folders in camera memory or if you move them
to different locations. If this happens, move the
files or folders back to their original locations in
camera memory and return them to their original
preset names (pages 201, 203).
Printing Error
Record Error
Replenish ink!
RETRY POWER ON
SYSTEM ERROR
The card is locked.
There are no files.
There are no printing
images.
Set up DPOF.
There is no image to
register.
This card is not
formatted.
This file cannot be
played.
This function cannot
be used.
This function is not
supported for this
file.
There are no DPOF settings specifying images
and the number of copies of each for printing.
Configure the required DPOF settings (page 179).
The image or movie whose setup you are trying to
save is not supported by BEST SHOT.
The memory card loaded in the camera is not
formatted. Format the memory card (page 174).
The image file or audio file is corrupted, or is a
type that cannot be displayed by this camera.
You attempted to copy files from built-in memory
to a memory card loaded in the camera while there
is no memory card in the camera (page 175).
The function you are trying to perform is not
supported for the file on which you are trying to
perform it.
Downloaded From camera-usermanual.com Casio Manuals 
						

							APPENDIX
234
CA-32 USB Cradle/AC Adaptor (Option)
You can perform the following operations after setting the
camera onto the optional CA-32 USB Cradle/AC Adaptor.
•Charging of the camera’s rechargeable lithium ion
battery.
•Viewing of images using the Photo Stand slideshow
feature.
•TV connectability for viewing of images on a television
screen.
•Direct connection to a printer for printing.
•Transfer of images recorded with the camera to a
computer over a USB connection.
General Guide
The following illustrations show the names of each
component and button on the USB cradle.
1Camera connector2[USB] lamp3[USB] button4[PHOTO] button5[CHARGE] lamp

 Back
6[DC IN 5.3V]
(AC adaptor connector)
7[] (USB port)8[AV OUT]
(AV output port)

 Front
67 8
5
1
243
Downloaded From camera-usermanual.com Casio Manuals 
						

							APPENDIX
235
Using the USB Cradle to Charge the
Battery
You can charge the camera’s NP-20 rechargeable lithium
ion battery by setting the camera onto the USB cradle.
1.Load the rechargeable litium ion battery (NP-
20) into the camera.
2.Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
AC Adaptor
[DC IN 5.3V]
USB Cradle
AC power cord
 NOTE 
•The bundled AC adaptor is designed for operation
with any power supply in the range of 100V to 240V
AC. Note, however, that the shape of the AC power
cord plug varies according to country or geographic
area. If you plan to use the AC adaptor in a
geographic area where the power receptacle shape
is different from that in your area, replace the AC
power cord with one of the other ones that comes
with the camera, or purchase a commercially
available AC power cord that is compatible with the
power outlets in that area.
•Never use the AC adaptor with a voltage converter.
3.Turn off the camera.
Downloaded From camera-usermanual.com Casio Manuals 
						

							APPENDIX
236
4.With the camera
positioned with the
monitor screen facing
forward as shown in
the illustration, place it
onto the USB cradle.
•Do not place the camera
onto the USB cradle
while it is turned on.
•The [CHARGE] lamp on
the USB cradle should
turn red, indicating that charging has started. When
charging is complete, the [CHARGE] lamp will turn
green.
•It takes about 130 minutes to achieve a full charge.
Actual charging time depends on current battery
capacity and charging conditions.
5.After charging is complete, remove the
camera from the USB cradle.
 IMPORTANT! 
•Use only the battery charger (BC-11L) or the USB
cradle (CA-32) to charge the special NP-20
rechargeable lithium ion battery. Never use any other
charging device.
•Use only the bundled AC adaptor. Never use any
other type of AC adaptor. Do not use optionally
available AD-C30, AD-C40, AD-C620 and AD-C630
AC adaptors with this camera.
•Make sure that the camera connector of the USB
cradle is securely inserted into the camera’s
connector as far as it will go.
•The [CHARGE] lamp may remain amber colored and
the charge operation may not start right away if you
try to charge immediately after using the camera
(which causes battery to become warm) or when it is
too hot or too cold where you are performing the
charge operation. If this happens, simply wait until
the battery reaches normal temperature. The
[CHARGE] lamp will turn red and charging will start
when the battery temperature returns to the
allowable charging temperature range.
[CHARGE] lamp
Downloaded From camera-usermanual.com Casio Manuals 
						

							APPENDIX
237

 If the camera does not work normally
This can mean there is a problem with how the battery is
loaded. Perform the following steps.
1.Remove the battery from the camera and
check the battery contacts for dirt. If the
contacts are dirty, wipe them clean with a dry
cloth.
2.Check to make sure that the AC adaptor’s
power cord is connected securely to the
power outlet and USB cradle.
•If the same symptoms occur again when you place
the camera on the USB cradle after taking the above
steps, contact a CASIO authorized service center. •If the [CHARGE] lamp starts flashing red, it means
that an error occurs while charging. An error can be
caused by any of the following: a problem with the
USB cradle, a problem with the camera, or a problem
with the battery or how it is loaded. Remove the
camera from the USB cradle and see if it works
normally.
Downloaded From camera-usermanual.com Casio Manuals 
						

							APPENDIX
238
Using the Photo Stand Feature
The “Photo Stand” feature lets you specify what should
appear on the camera’s monitor screen while the camera is
on its USB cradle. You can play a Photo Stand slideshow
without worrying about remaining battery power, or you can
specify display of a particular image. Photo Stand feature
operations are performed in accordance with slideshow
setting. Before using Photo Stand feature, you need to
configure slideshow settings as described in the camera
user’s guide.
1.Turn off the camera.
2.Set the camera onto the USB cradle.
3.Press the USB
cradle’s [PHOTO]
button.
•This starts the Photo
Stand slideshow with
the images or image
you specified.•Pressing [MENU] displays a screen for configuring
slideshow settings. To restart the slideshow, press
[MENU] while the menu screen is displayed, or
select “Start” and then press [SET].
•During audio playback, you can adjust volume by
pressing [] and then using [
] and [].
4.To stop the Phot Stand slideshow, press the
[PHOTO] button again.
 IMPORTANT! 
•The battery is not charged while a Photo Stand
slideshow is in progress. To charge the battery, stop
the slideshow.
[PHOTO] button
Downloaded From camera-usermanual.com Casio Manuals 
						

							APPENDIX
239
Using the USB Cradle to Display Images
on a TV Screen
You can place the camera onto the USB cradle and
connect the cradle to a TV to view camera images on a TV
screen.
1.Connect one end of the AV cable that comes
with the camera to the [AV OUT] port of the
USB cradle, and the other end to the video
input terminal of the TV.
AV cable (bundled)
[AV OUT] (AV output port) Video input
terminal TV
•Connect the yellow plug of the AV cable to the video
input (yellow) terminal of the TV, and the white plug
to the TV’s audio input (white) terminal.
2.Turn off the camera.
3.Set the camera onto the USB cradle.
4.Turn on the TV and select its video input
mode.
5.Press [] to turn on the camera, and then
perform the required operation for playback.
 IMPORTANT! 
•See the applicable explanation in the camera user’s
guide when outputting images to a TV screen.
•When the camera is on the USB cradle, pressing the
cradle’s [PHOTO] button will activate the Photo
Stand feature and display images on the TV screen.
Downloaded From camera-usermanual.com Casio Manuals 
						

							APPENDIX
240
Using the USB Cradle to Print Images
You can place the camera onto the USB cradle and
connect the cradle to a printer to print images.
1.Connect the USB cable that comes bundled
with the camera to the USB cradle and a
printer.
USB portConnector A
USB cable
(bundled)Connector B
[] (USB port)
•Also, connect the AC adaptor to the USB cradle and
plug the AC adaptor into an electrical outlet.
•If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
2.Turn off the camera, and then set the camera
on the USB cradle.
3.Turn on the printer and then perform the
procedure in the camera user’s guide to print.
4.After you are finished printing, press the USB
cradle’s [USB] button, and then turn off the
camera.
 IMPORTANT! 
•Never disconnect the USB cable, or perform any
camera or USB cradle operation while printing is in
progress. Doing so causes a printer error.
Downloaded From camera-usermanual.com Casio Manuals