Casio Exilim EX Z5 User Manual

							PLAYBACK
131
Using Color Restoration to Correct the
Color of an Old Photograph
Color restoration let you correct the old color of a
photograph shot with a digital camera. This function is
useful for correcting existing old photographs, posters, etc.
•Performing color restoration on an image causes a new
(restored) version (2M (1600 ×
 1200 pixels)) to be stored
as a separate file.
1.In the PLAY mode, use [] and [] to scroll
through images on the monitor screen and
display the one you want to correct.
2.Select the “PLAY” tab, select “Color
Correction”, and then press [].
3.Use [] and [] to select the photograph
candidate you want.
4.Use [
] and [] to select “Correct”, and then
press [SET].
•This displays a cropping boundary on the monitor
screen.
•To exit color restoration without storing anything,
select “Cancel”.
 IMPORTANT! 
•If the original image is smaller than 2M (1600 ×
 1200
pixels), the new (corrected) version is the same size
as the original one.
•Keystone correction cannot be performed on the
following types of images.
—Movie images and the voice recording file icon
—Images created with MOTION PRINT
—Images recorded with another camera
•The keystone correction operation cannot be
performed if there is not enough memory to store the
corrected image.
•When you display a corrected image on the camera’s
monitor screen, the date and time indicate when the
image was originally recorded, not when the image
was corrected.
•When a keystone corrected image appears on the
full-month calendar screen, it is displayed on the
date that it was corrected (page 140).
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
132
 IMPORTANT! 
•If the original image is smaller than 2M (1600 ×
 1200
pixels), the new (restored) version is the same size
as the original one.
•Note that you cannot correct the following types of
images.
—Movie images and the voice recording file icon
—Images created with MOTION PRINT
—Images recorded with another camera
•The color correct operation cannot be performed if
there is not enough memory to store the corrected
image.
•When you display a restored image on the camera’s
monitor screen, the date and time indicate when the
image was originally recorded, not when the image
was corrected.
•When a corrected image appears on the full-month
calendar screen, it is displayed on the date that it
was corrected (page 140).
 NOTE 
•If you want to record the image of an old photograph
with this camera and restore the resulting image, see
“Restoring an Old Photograph” on page 99.
5.Use the zoom button to make the cropping
boundary larger or smaller.
•Resize the cropping boundary as required to crop the
area you want.
6.Use [
], [], [], and [] to move the
cropping boundary to the location you want,
and then press [SET].
•The camera will correct color automatically and save
the image.
•If you do not want a border around the image,
configure the cropping boundary so it is slightly
inside of the boundary of the displayed image.
•To exit color restoration without saving anything,
press [MENU].
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
133
To do this:
Fast forward or fast reverse
playback
•Each press increases the speed
one more step.
Return fast forward or fast
reverse movie playback to normal
speed
Pause movie playback
Scroll paused playback one
frame
Stop movie playback
Adjust the movie audio volume
level
Toggle monitor screen indicators
on and off
Zoom the movie image
Scroll a zoomed movie image on
the monitor screen
Do this:
Press [] or [].
Press [SET].
Press [SET].
Press [] or [].
Press [MENU].
Press [] and then use
[
] and [].
Press [
] (DISP).
Press the zoom button().
Use [
], [], [], [].
Playing and Editing a Movie
Playing a Movie
Use the following procedure to play a movie you recorded
with this camera.
1.In the PLAY mode,
use [] and [] to
scroll through movies
on the monitor screen
and display the one
you want.
2.Press [SET].
•This starts playback of the movie.
•You can perform the following operations while a
movie is playing.
Movie icon
Elapsed recording time
Image quality
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
134
Editing a Movie
Use the procedure in this section to edit and delete movies.
Editing operations let you cut everything before or after a
specific frame, or to cut everything between two frames.
 IMPORTANT! 
•Cut operations cannot be undone. Make sure you
really want to cut the part of the movie you are
specifying before executing the cut operation.
•Movie editing is not possible for movies not recorded
with this camera.
•A movie that is shorter than five seconds cannot be
edited.
•Certain types of memory cards can cause the movie
cut operation to take considerable time. This is
normal and does not indicate malfunction.
•You will not be able to perform the cut operation if
the amount of memory available is less than the size
of the movie file you are cutting. If this happens,
delete any files you no longer need to free up more
memory.
•Splicing of two different movies into a single movie or
cutting one movie into multiple parts are not
supported by camera operations.
 IMPORTANT! 
•You can adjust the volume level of movie audio
during movie playback only.
•You can zoom a movie up to 3.5 times normal size.
•Playback may not be possible for movies not
recorded with this camera.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
135
To do this:
Fast forward or fast reverse
playback
Pause or unpause movie
playback
Scroll paused playback one
frame
Cancel the cut operation
Do this:
Press [] or [].
Press [SET].
Press [] or [].
Press [MENU].
4.Display the frame where you want the cut to
be located.
•The red portion of the
indicator bar shows
what part will be cut.
To do this:
Cut everything before a
specific frame
Cut everything after a specific
frame
Exit the cut mode
Select this setting:
 Cut
 Cut
Cancel

To cut everything before or after a specific
frame
1.While the movie you
are editing is playing,
press [SET].
•This will pause movie
playback.
2.Press [].
•You can also display the same screen while in the
PLAY mode, by pressing [MENU], selecting the
“PLAY” tab, selecting “Movie Editing”, and then
pressing [].
3.Use [
] and [] to select the operation you
want to perform.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
136

To cut everything between two specific
frames
1.While the movie is
playing, press [SET].
•This will pause movie
playback.
2.Press [].
•You can also display the same screen while in the
PLAY mode, by pressing [MENU], selecting the
“PLAY” tab, selecting “Movie Editing”, and then
pressing [].
3.Use [
] and [] to select “ Cut”, and
then press [SET].
•Select “Cancel” to exit the cut mode.
5.When the frame you
want is displayed,
press [].
6.Use [
] and [] to select “Yes,” and then
press [SET].
•The message “Busy.... Please wait...” will remain on
the display as the cut operation is performed. Cutting
is complete when the message disappears.
•Select “No” to exit the cut mode.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
137
6.Referring to step 4,
search for the cut end
screen. When the cut
end screen is
displayed, press [].
•The red portion of the
indicator bar shows what
part will be cut.
7.Use [
] and [] to select “Yes”, and then
press [SET].
•The message “Busy.... Please wait...” will remain on
the display as the cut operation is performed. Cutting
is complete when the message disappears.
•Select “No” to exit the cut mode.
4.Display the starting frame where you want the
first cut to be located.
5.When the frame you
want is displayed,
press [].
To do this:
Fast forward or fast reverse
playback
Pause or unpause movie
playback
Scroll paused playback one
frame
Cancel the cut operation
Do this:
Press [] or [].
Press [SET].
Press [] or [].
Press [MENU].
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
138

To capture a still image from a movie
1.In the PLAY mode, use [] and [] to scroll
through movies on the monitor screen and
display the one that contains the frames you
want.
2.Press [MENU].
3.Select the “PLAY” tab, select “MOTION
PRINT”, and then press [].
4.Use [
] and [] to
select the layout (“1
frame” or “9 frames”)
you want to use.
•Select “Cancel” to exit
the MOTION PRINT
mode.
Capturing a Still Image from a Movie
(MOTION PRINT)
The MOTION PRINT feature lets you capture a frame from
an existing movie and create a still image that is suitable
for printing. There are two layouts you can use when
capturing an image, and the layout you select determines
the final image size.
•9 frames (1600 ×
 1200-pixel
final image size)
•1 frame (640 ×
 480-pixel final
data size)
Selected main image Background images
Selected main image
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
139
Displaying the 9-image View
The following procedure displays nine images on the
monitor screen at the same time.
1.In the PLAY mode, press the zoom button
(
).
•This displays the 9-image screen. The image that
was last on the display will have a selection
boundary around it.
•If there are fewer than nine images in memory, they
are displayed starting from the upper left corner. The
selection boundary is located at the image that was
on the display before you switched to the 9-image
view.
•For a movie file (page 133), “
” is displayed at
the top and bottom of the screen.
•On the 9-image screen, 
 indicates a voice
recording file (page 147).
•
 appears in place of the image when the date
contains data that cannot be displayed by this
camera.
5.Use [] and [] to display the frame that you
want to use as the main image.
•Holding down either button scrolls at high speed.
6.After selecting the
frame you want, press
[SET].
•This displays the
resulting still image.
•If you selected “9
frames” for the layout,
the frame you selected
in step 4 will be the
main image, and the
frames on either side of
it will be used as the
background frames.
•If you selected “1 frame” in step 4, an image of the
frame you selected in step 6 appears here.
 IMPORTANT! 
•MOTION PRINT is not possible for movies not
recorded with this camera.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PLAYBACK
140
Date selection cursor
Displaying the Calendar Screen
Use the following procedure to display a 1-month calendar.
Each day shows the first file recorded on that day, which
makes it easy to find the file you want.
1.In the PLAY mode,
press the zoom button
(
) twice.
•You can also display
the calendar by
pressing [MENU],
selecting the “PLAY”
tab, selecting
“Calendar”, and then
pressing [] to display
the calendar.
•Use the procedure
under “Changing the
Date Format” on page
164 to specify the date
format.
Year/Month
2.Use [
], [], [], and
[] to move the
selection boundary to
the image you want.
Pressing [] while the
selection boundary is
in the right column or
[] while it is in the left
column scrolls to the
next full screen of nine
images.
Example: When there are 20 images in memory, and
Image 1 is displayed first
123
456
78910 11 12
13 14 15
16 17 1819 20
3.Pressing any button besides [
], [], [], [],
or the shutter button displays the full-size
version of the image where the selection
boundary is located.
Selection boundary
Downloaded From camera-usermanual.com Casio Manuals