Casio Exilim EX Z5 User Manual

							PRINTING IMAGES
181
To configure print settings for all images
1.In the PLAY mode, press [MENU].
2.Select the “PLAY” tab, select “DPOF”, and
then press [].
3.Use [
] and [] to select “All images”, and
then press [].
4.Use [
] and [] to
specify the number of
copies.
•You can specify up to 99
for the number of copies.
Specify 00 if you do not
want to have the image
printed.
5.To turn on date stamping for the prints, press
[BS] so “On” is displayed.
•“On” indicates that date stamping is turned on.
•Turning on date stamping while “00” is specified for
the number of copies will cause the number of copies
to change to “01”. Any other number of copies setting
will remain the same when you turn on date
stamping.
•To turn off date stamping for the prints, press [BS] so
“Off” is displayed.
6.After all the settings are the way you want,
press [SET] to apply them.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
182
 IMPORTANT! 
•DPOF settings are not cleared automatically after
printing is complete. This means that if you perform
another printing operation without clearing DPOF
settings, printing will be performed in accordance
with the last settings you configured. If you want to
prevent this from happening, perform the procedure
under “To configure print settings for all images”
(page 181) and change the number of copies to “00”.
After that, you can configure new DPOF settings as
required.
•If you take a memory card to a professional print
service, be sure to tell them that it includes DPOF
settings for the images to be printed and the number
of copies. If you don’t, the printing service may print
all images without regard to your DPOF settings, or
date printing may not be performed.
•Note that some professional print services do not
support DPOF printing. Check with your service
before ordering prints.
•Some printers may have settings that disable date
stamp and/or DPOF printing. See the user
documentation that comes with your printer for
details about how to enable these features.•If you use the DPOF setting to turn on date stamping
for printing on an image that already has date/time
stamp data embedded in it (page 122), the two
stamps will be superimposed. Because of this, do not
turn on DPOF date stamping if an image already has
a date/time stamp embedded on it.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
183
Using PictBridge or USB DIRECT-PRINT
You can connect the camera
directly to a printer that supports
PictBridge or USB DIRECT-PRINT,
and perform image selection and
printing using the camera monitor
screen and controls. DPOF support
(page 179) also lets you specify
which images you want to print and
how many copies of each should be
printed.
•PictBridge is a standard
established by the Camera and
Imaging Products Association
(CIPA).
•USB DIRECT-PRINT is a
standard proposed by Seiko
Epson Corporation.

 Setting the USB Port Protocol
1.Press [MENU].
2.Select the “Set Up” tab, select “USB”, and
then press [].
3.Use [
] and [] to select the setting you
want, and then press [SET].
•Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external storage
device. Use this setting for normal transfer of images
from the camera to a computer (using the bundled
Photo Loader application).
•PTP (PictBridge) simplifies the transfer of image data
to the connected device.
Select this setting:
Mass Storage (USBDIRECT-PRINT)
PTP (PictBridge) When connecting to this type of
device:
Computer or USB DIRECT-
PRINT-compatible printer
PictBridge-compatible printer
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
184

 Connecting the Camera to Your Printer
1.Check the battery level indicator to make sure
that the battery is fully charged, and then
press the power button to turn off the camera.
•If battery power is low, replace the battery.
•The camera does not draw power over the USB
cable.
USBUSB portUSB cable (bundled)
USB/AV connector
2.Use the USB cable that comes with the
camera to connect the camera to a printer.
•Take care when connecting the USB cable to the
camera or your printer. USB ports and cable plugs
are shaped for proper positioning.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
185
4.Use [
] and [] to select “Paper Size”, and
then press [].
5.Use [
] and [] to select the paper size you
want to use for printing, and then press [SET].
•The following are the print sizes that are available.
3.5˝ ×
 5˝
5˝ ×
 7˝
4˝ ×
 6˝
A4
8.5˝ ×
 11˝
By Printer
•Selecting “By Printer” prints using the paper size
selected on the printer.
•Available paper size settings depend on the
connected printer. For full details, see the
instructions that come with your printer.

 Printing Images
1.Turn on the printer.
2.Load paper for printing the images into the
printer.
3.Turn on the camera.
•This displays the print
menu on the camera’s
monitor screen.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
186
7.On the camera’s monitor screen, use [
] and
[] to select “Print”, and then press [SET].
•This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera’s buttons while printing is in progress
will cause the message to reappear.
•The print menu will appear when printing is
complete.
•If you selected “1 Image” in step 6, you can select
another image for printing and then repeat this step
to print.
8.After printing is complete, turn off the camera
and then disconnect the USB cable from the
camera.
6.Use [
] and [] to
specify the print
option you want.
•To print a single image:
Select “1 Image” and
then press [SET]. Next,
use [] and [] to select
the image you want to
print.
•To print multiple images or all images: Select “DPOF
Printing”, and then press [SET]. Selecting this option
will print the images selected with the DPOF settings.
See page 180 for more information.
•You can toggle date stamping of the image on and
off by pressing [BS]. The date stamp will be printed
when “On” is indicated on the monitor screen.
“On” indicates that date stamping is turned on.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
187
Date Printing
Any one of the procedures described below can be used to
include the recording date in image prints. Correct date
printing requires that the current date be set on the camera
before the image is recorded.
•Before recording the image, turn on date stamping
(“Date” or “Date&Time”) (page 122).
•Specifying date printing with DPOF settings (page 180)
—If you use the DPOF setting to turn on date stamping
for printing on an image that already has date/time
stamp data embedded in it (page 122), the two stamps
will be superimposed. Because of this, do not turn on
DPOF date stamping if an image already has a date/
time stamp embedded on it.
—Some printers may have settings that disable time
stamp and/or DPOF printing. See the user
documentation that comes with your printer for details
about how to enable these features.
—Note that some professional print services do not
support DPOF printing. Check with your service before
ordering prints.
•Specifying date printing with the Photohands software
that comes with the camera
—See page 23 of the Photohands User’s Guide for
details. The Photohands User’s Guide is provided as a
PDF file on the CD-ROM that comes bundled with your
camera.•Specifying date printing when having printing done by a
print service
—Some print services do not support date printing.
Check with your service for more information.

 Printing Precautions
•See the documentation that comes with your printer for
information about print quality and paper settings.
•Contact your printer manufacturer for information about
models that support PictBridge and USB DIRECT-PRINT,
upgrades, etc.
•Never disconnect the USB cable or perform any camera
operation while printing is in progress. Doing so causes a
printer error.
Downloaded From camera-usermanual.com Casio Manuals 
						

							PRINTING IMAGES
188
Exif Print
Exif Print is an
internationally supported,
open standard file format
that makes it possible to
capture and display vibrant
digital images with accurate
colors. With Exif 2.2, files
include a wide range of
shooting condition
information that can be
interpreted by an Exif Print
printer to produce better-
looking prints.
 IMPORTANT! 
•Information about the availability of Exif Print
compatible printer models can be obtained from each
printer manufacturer.
PRINT Image Matching III
Images include PRINT Image MatchingIII data (mode setting and other camera
setup information). A printer that
supports PRINT Image Matching 
IIIreads this data and adjusts the printed
image accordingly, so your images
come out just the way you intended
when you recorded them.
*Seiko Epson Corporation holds the
copyright for PRINT Image Matching and
PRINT Image Matching 
III.
Downloaded From camera-usermanual.com Casio Manuals 
						

							VIEWING IMAGES ON A COMPUTER
189
VIEWING IMAGES ON A COMPUTER
After establishing a USB connection between the camera
and your computer, you can use your computer to view
images in file memory and copy images to your computer’s
hard disk or other storage media. In order to do this, you
first need to install the USB driver located on the CD-ROM
that comes bundled with the camera onto your computer.
Note that the procedure you need to perform depends on
whether you are using computer running under Windows
(see below) or a Macintosh (see page 196).Using the Camera with a Windows
Computer
The following are the general steps for viewing and copying
files from a computer running under Windows. You can find
details about each operation in the procedures that follow
below. Note that you should also refer to the
documentation that comes with your computer for other
information about USB connections, etc.
1. If you are running Windows 98SE or 98, install the
USB driver onto your computer.
•You need to perform this step only once, the first
time you connect to your computer.
•If you are running Windows XP, 2000, or Me, you do
not need to install the USB driver.
2. Establish a connection between the camera and
computer.
3. View and copy the images you want.
Downloaded From camera-usermanual.com Casio Manuals 
						

							VIEWING IMAGES ON A COMPUTER
190
 IMPORTANT! 
• If battery goes low during printing, printing may stop
and the camera may shut down.
• If you plan to transfer file data from the camera’s
built-in memory to your computer, make sure there is
no memory card loaded in the camera. If there is,
remove the memory card from the camera before
you connect to your computer.

 Install the USB driver onto your computer
Do not try to establish a connection between the
camera and computer before installing the USB
driver onto the computer. If you do, the computer will
not be able to recognize the camera.
• USB driver installation is required in the case of
Windows 98SE and 98. Do not connect the camera to
a computer running one of the above operating
systems without installing the USB driver first.
• USB driver installation is not required in the case of
Windows XP, 2000, and Me.
Downloaded From camera-usermanual.com Casio Manuals