Casio Cassiopeia Be 300 Pocket Manager Users Guide

							111
NOTE
In step 1 of the above procedure, you could also display the snapshot screen of the image you
want to attach and then tap 
.
Changing to a Different Screen
Use the following procedures when you want to change to another screen from the thumbnail
index screen.
To  g o  t o : Ta p :
The snapshot screen for the selected snapshot
The slideshow of the folder that contains the selected snapshot
The camera screen
4-1-3 Playing Back Images using Snapshot Screen
Displaying a Specific Snapshot
You can select one of the thumbnails on the thumbnail index screen and then display a large-size
image in the snapshot screen.
You can display the large-size image of a thumbnail using any of the following methods.
•Double-tap the thumbnail of the image you want to display.
•Tap the thumbnail of the image you want to display so its name is highlighted, and then tap 
.
•Tap the thumbnail of the image you want to display so its name is highlighted, and then press
the CASSIOPEIA’s OK button.
To return to the thumbnail index screen from the snapshot screen, tap the 
 button.
Thumbnail index screen Snapshot Screen 
						

							112
Using the Snapshot Screen
There are four different snapshot screen views: compressed, uncompressed, zoom, and full-
screen.
Compressed View ......... This view displays the entire image so it appears like a photograph.
Uncompressed View ..... This view displays the image in actual-size. In this view, you have to
scroll the image to view the parts that do not fit on the screen.
Zoom View ................... This view enlarges the image to twice its normal size.
Full-screen View ........... This view rotates the image and adjusts its size so it fits within the screen
area.
Compressed View
Uncompressed View
Full-screen View Zoom View 
						

							113
Changing the Snapshot Screen View
Use either of the following procedures to select compressed, uncompressed, zoom, or full-screen
as the snapshot screen view.
To change the snapshot screen view
•On the Size menu, tap Compressed, Uncompressed, Zoom, or Full Screen.
•Press the CASSIOPEIA’s OK button to cycle through the four views in the sequence:
compressed - uncompressed - zoom - full screen.
•Tapping the display while the full screen view is being used switches to the compressed view.
About the Snapshot Screen Status Bar
Scrolling Images on the Snapshot Screen
Use the following procedure to scroll through images on the snapshot screen, without returning to
the list screen. Images are scrolled in the sequence they are listed on the thumbnail index screen.
To change the snapshot screen image
Displaying the File Properties of a Snapshot
The file properties dialog box provides you with information about the file whose image is
currently displayed on the snapshot screen.
Total number of index files
File number (in the thumbnail index screen) File name
To do this:
Scroll back
Scroll forward
Press this CASSIOPEIA cursor button:
Up or left
Down or right 
						

							114
To display the file properties of a snapshot
1. On the snapshot screen, tap .
2. To close the file properties dialog box, tap OK.
Changing to a Different Screen
Use the following procedures when you want to change to another screen from the snapshot screen.
To go to: Tap:
The thumbnail index screen that contains the displayed snapshot
A slideshow of the folder that contains the displayed snapshot
The camera screen
4-1-4 Playing Back Images using Slideshow Screen
Displaying the Slideshow Screen
The slideshow screen lets you sequentially play back snapshots in the condensed view.
Slideshow Screen Thumbnail index screen 
						

							115
To display the slideshow screen
On the thumbnail index screen or snapshot screen, tap .
To return to the snapshot index from the slideshow screen, tap the 
 button.
Using the Slideshow Screen
To control image playback with the on-screen control panel
To control image playback with CASSIOPEIA buttons
NOTE
Status bar information is identical to that described under “About the Snapshot Screen Status Bar”
on page 113.
Status bar
Control panel
To do this:
Start the slide show
Images appear in the same sequence they are arranged on the
thumbnail index screen, for the amount of time you set using the
slideshow settings dialog box described on page 116.
Stop the slideshow
Toggle the slideshow direction between forward and reverse
Jump to a specific image.
Do this:
Ta p  
.
Ta p  .
Ta p  .
Slide 
To do this:
Start the slide show
Stop the slideshow
Scroll forward to the next image
Scroll back to the previous image
Press this button:
OK
ESC
Down or right cursor button
Up or left cursor button 
						

							116
Making Slideshow Settings
Tapping Settings button displays a dialog box for controlling the playback interval and the repeat
setting.
Playback Interval ... Use this setting to specify how long each image should remain displayed
before changing to the next one.
Auto Repeat ........... Check this box if you want the slideshow to restart from the first image in the
thumbnail index screen after the last image is reached.
After making the settings you want, tap OK to close the dialog box.
Changing to a Different Screen
Use the following procedures when you want to change to another screen from the slideshow
screen.
To go to: Tap:
The thumbnail index screen that contains the displayed snapshot
The snapshot screen for the displayed snapshot
The camera screen
Adjusting Slideshow Screen Brightness
You can adjust the screen brightness level of the slideshow screen. Separate settings can be made
for operation under battery power and operation under AC adapter power.
To adjust slideshow screen brightness
1. On the slideshow screen, tap Brightness to display the dialog box shown below. 
						

							117
2. Drag the sliders left to reduce brightness and right to increase brightness.
•Note that the upper slider controls brightness under battery power, while the lower slider
controls brightness under AC adapter power.
•The brightness settings you make are used during slideshow playback only.
3. When the settings are the way you want, tap OK to apply them and close the dialog box.
NOTE
The brightness settings you make here do not affect the brightness of the preview screen during
recording. See page 108 for information about recording screen brightness.
4-1-5 Folder and File Operations
You should perform all Photo Viewer folder and file operations on the thumbnail index screen.
Folder Operations
On the thumbnail index screen, tap Func L → Folder.... This displays the Select Folder dialog
box, which is the screen from which you should start all folder operations.
To create a new folder
1. Display the Select Folder dialog box.
2. Tap New.
•This displays the New Folder dialog box.
3. Input the name you want to give to the folder into the Input Name box, and then tap the OK
button.
To rename a folder
1. Display the Select Folder dialog box.
2. Tap the folder whose name you want to change.
3. Tap Rename.
•This displays the Rename dialog box.
4. Input the new name you want to give the folder and then tap OK.
To delete a folder
1. Display the Select Folder dialog box.
2. Tap the folder you want to delete.
3. Tap Delete.
4. In response to the confirmation message that appears, tap OK to delete the folder or Cancel to
cancel without deleting anything.
Select Folder Dialog Box 
						

							118
File Operations
Use the commands on the thumbnail index screen Func L to perform operations on image files
whose formats are supported by Photo Viewer.
To rename a file
1. On the thumbnail index screen, tap the thumbnail of the image whose file name you want to
change.
2. Tap Func L → Rename.
•This displays the Rename dialog box.
3. Input the new name you want to give to the file and then tap OK.
To move a file
1. On the thumbnail index screen, tap the thumbnail of the image you want to move.
2. Tap Func L → Move....
•This displays the Move dialog box.
3. Select the folder to which you want to move the file, and then tap OK.
To move all image files from one folder to another
1. Display the thumbnail index screen for the folder that contains the image files you want to
move.
•See “Selecting the Thmubnail Index Screen Folder” on page 110.
2. Tap Func L → Batch Move....
•This displays the Batch Move dialog box.
3. Select the folder to which you want to move all the image files, and then tap OK.
•This moves all the image files displayed on the thumbnail index screen of the folder you
selected in step 1 to the folder you specified in step 3.
To delete a file
1. On the thumbnail index screen, select the thumbnail of the image whose image file you want
to delete.
2. Tap Func L → Delete....
3. In response to the confirmation message that appears, tap OK to delete the image file or
Cancel to cancel without deleting anything.
To delete all image files in a folder
1. Display the thumbnail index screen for the folder that contains the image files you want to
delete.
•See “Selecting the Thumbnail Index Screen Folder” on page 110.
2. Tap Func L → Batch Delete....
3. Specify whether or not you also want to delete read-only image files checking or unchecking
the option on the confirmation dialog box that appears.
4. Tap OK to delete all the image files in the folder you selected in step 1, or Cancel to cancel
without deleting anything. 
						

							119
4-2 Movie Player
Movie Player makes it possible for you to play movie files on the screen of your CASSIOPEIA.
NOTE
•To use Movie Player, you need to install it from the bundled CD-ROM. See Chapter 6 of this
User’s Guide for information about installing programs on your CASSIOPEIA.
•Movie Player makes it possible for you to play back CASIO original format CMF files on your
CASSIOPEIA. The bundled CD-ROM also includes a program called “Mobile Video
Converter,” which converts AVI and other video file formats to CMF.
To start up Movie Player
1. Turn on your CASSIOPEIA.
2. On the Top Menu, double-tap Movie Player.
•This starts up Movie Player and displays its thumbnail index screen.
4-2-1 Using the Movie Player Thumbnail Index Screen
The thumbnail index screen shows thumbnails for six movies.
Thumbnail index screen Movie Playback Screen
Thumbnail index screenFolder name
Thumbnail
Shows an image from
the movie.
A red frame indicates the
currently selected movie.
Its file name is also
highlighted. Use the
cursor keys to select
another movie.
File name indicates main
memory file,  indicates
storage card file. 
						

							120
Thumbnail Index Screen Operations
You can perform the following operations from the thumbnail index screen.
•Select a folder
•Create, rename, or delete folders
•Rename, move, or delete files
•Automatically generate thumbnails on the thumbnail index screen
•Create a Mail message with an attached movie
Each of these operations is described in detail in the following sections of this manual.
Selecting the Thumbnail Index Screen Folder
The thumbnail index screen shows all of the CMF movie files in the currently selected folder.
Perform the steps below to change to another folder.
1. Tap Func L → Folder... or tap the folder name box.
•This displays the Select Folder dialog box.
2. Select the folder you want by tapping it.
3. Tap OK.
•This returns to the thumbnail index screen, which now shows the contents of the folder you
selected in step 2.
NOTE
•The thumbnail index automatically generates thumbnail files for the movies it displays.
•Movie Player can access only folders under My Documents\Movie in CASSIOPEIA nand disk
or on a storage card.
Use this dialog box to create a new folder, or to rename or
delete an existing folder.