Canon Wux450, Wx520 Multimedia Projector Users Manual
Have a look at the manual Canon Wux450, Wx520 Multimedia Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 197
197
Installation and Maintenance
Maintenance
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following
message (two types) is displayed for 10 seconds every time the projector is turned
on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
•Only the [ ], [ ], OK and POWER buttons are available while this screen is
displayed.
• When you press the POWER button, the “Push POWER button again to turn off
power.” message...](http://img.usermanuals.tech/thumb/14/85752/w64_canon-realis-wux450-pro-av-manual_d-196.png "Page 197
197
Installation and Maintenance
Maintenance
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following
message (two types) is displayed for 10 seconds every time the projector is turned
on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
•Only the [ ], [ ], OK and POWER buttons are available while this screen is
displayed.
• When you press the POWER button, the “Push POWER button again to turn off
power.” message...")
![Page 200
Replacing the Lamp
200
7Turn on the power. Bring up the menu and select [System settings] -
[Other settings] - [Lamp counter].
8Select [Reset] - [Yes] to reset the lamp counter.
■If the lamp cover comes off
Align the point of attachment on the lamp cover with the groove on the projector
and gently push the lamp cover to attach it.
• We recommend cleaning or replacing the air filter (part no.: RS-FL02) when you
replace the lamp.
• Contact the Canon Customer Support Center for further information.](http://img.usermanuals.tech/thumb/14/85752/w64_canon-realis-wux450-pro-av-manual_d-199.png "Page 200
Replacing the Lamp
200
7Turn on the power. Bring up the menu and select [System settings] -
[Other settings] - [Lamp counter].
8Select [Reset] - [Yes] to reset the lamp counter.
■If the lamp cover comes off
Align the point of attachment on the lamp cover with the groove on the projector
and gently push the lamp cover to attach it.
• We recommend cleaning or replacing the air filter (part no.: RS-FL02) when you
replace the lamp.
• Contact the Canon Customer Support Center for further information.")
201 MULTIMEDIA PROJECTOR Networked Multi- Projection (NMPJ)
203 Table of Contents Safety Instructions Before Use Operation Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation and Maintenance Installation Connecting to a Network Maintenance Networked Multi-Projection Networked Multi-Projection Overview Operation in Each Mode Functions in All Modes AppendixOther Information Index Networked Multi- Projection Overview
204 Introduction to Networked Multi-Projection ■Projection Ov er a Network Networked Multi-Projection (NMPJ) is a projector function enabling projection of computer screens over a local network. Multiple computers and multiple projectors can be connected, for a vari ety of projection scenarios. ■Split-Screen Projection of Multiple Images Images from multiple computers can be projected at once, with the images projected in separate areas of a single screen. ■ Projection of an Image from Multiple Projectors at Once Images from a single computer can be projec ted from multiple projectors at once. Links computers and projectors via a network connection. LAN Projection of multiple computer screens in split-screen display.LAN LAN
205 Introduction to Networked Multi-Projection Networked Multi-Projection Networked Multi-Projection Overview ■Selecting the Projection Monitor For multi-monitor computers, you can pr oject either the primary or secondary monitor. For each computer, you can select the monitor to project. • With some computers, it may not be possible to switch between projection of the primary and secondary monitor. • The application responsiveness may decline when many computers and projectors are connected over the network. • For computers that support three or more monitors, the monitor used for projection varies depending on the model of computer. -/ PSPS Select the primary or secondary monitor for projection LAN Select the primary or secondary monitor of each computer LAN
206 Installing the NMPJ Application To use the NMPJ function, you must install the NMPJ application. Instructions in this manual are for installation in a Windows 7 environment. System Requirements Application system requirements are as follows. CPU Core 2 Duo P8600, 2.4 GHz or higher (32- or 64-bit) Memory 1 GB or more HDD 32 GB or more Monitor 1024x768 min. resolution Operating System Windows XP Professional SP3 Windows Vista Business SP2 Windows 7(Home/Professional/Ultimate) SP1 * Windows XP and Vista compatibility is limited to 32-bit editions. * Both 32- and 64-bit editions of Windows 7 are supported. Network In TCP/IP network environments, projectors can be connected to computers via the following LAN connections. Wired LAN (1000BASE-T, 100BASE-TX) Cannot be installed on computers without a minimum resolution of 1024x768. Additionally, operation is not ensured if the resolution is switched to less than 1024x768 after installation. • Operation is not ensured in other operating systems or editions. • Menus are in English in all cases, except in Japanese and Simplified Chinese versions of the application. • Operation is not ensured in operating systems other than English, Japanese, or Simplified Chinese OSes. • Operation is not ensured in Windows 8. • Although the application also supports computer-projector communication over a router, operation is only ensured over one router hop. Additionally, to use Broadcast mode ( P245) with projectors in other subnets, the router must support IPv4 multicast routing. Note that the router must be set up to route multicast addresses used by the application. • If you are using an Aero style in Windows, this message may be displayed: “Do you want to change the color scheme to improve performance?”
207 Installing the NMPJ Application Networked Multi-Projection Networked Multi-Projection Overview Installation The application is stored in the projector’s internal memory. To install it on a computer, use a web browser on the computer to access the projector and download the application. 1On the computer, start a web browser and connect to the projector. For instructions on accessing the projec tor’s web screen with a browser, refer to “Completing Computer Settings” ( P174). To check the projector’s IP address, refer to the [Network settings] tab on the projector, or select [LAN] as the input signal. 2Click [Network Multiple Projection Download]. 3Click [Download]. 4When a confirmation message is displayed, click [Run]. For instructions on connecting to the computer over a network, refer to “Connecting to a Network” ( P163).
Installing the NMPJ Application 208 5If a [User Account Control] message is displayed, click [Yes]. 6Next, follow the instructions displayed to complete the installation process. • In Windows 7 and Windows Vista, confirmation or warning messages may be displayed during installation or uninstallation. These messages request administrator credentials from the current user. If you are logged in as a user with administrator cr edentials, click [Yes] (or [Continue]) to continue. • Depending on the software, you may not be able to continue without administrator credentials. If you are logged in as a standard user, switch to an administrator account and try again. • You may need to restart the computer to complete the installation process. If restarting is requested, be sure to restart the computer.
209 Installing the NMPJ Application Networked Multi-Projection Networked Multi-Projection Overview ■Uninstallation 1Select [Start] > [All Programs] > [Canon NMPJ] > [Uninstall network multiple projection]. 2If a [User Account Control] message is displayed, click [Yes]. 3After the confirmation message is displayed, click [OK].
Installing the NMPJ Application 210 4After uninstallation is finished, click [OK] when the confirmation message is displayed. 5Delete the following folder manually.Windows XP C:\Documents and Settings\\Local Settings\Application Data\Canon\NMPJ Windows Vista C:\Users\\AppData\Local\Canon\NMPJ Windows 7 C:\Users\\AppData\Local\Canon\NMPJ You may need to restart the computer to complete the uninstallation process. If restarting is requested, always restart the computer. These files are hidden. To view hidden files in Windows Explorer, select [Folder options] > [View] > [Show hidden files, folders, and drives].