Canon Wux450, Wx520 Multimedia Projector Users Manual

							
181
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
ItemExplanationFactory default setting
Password
User name When logging into the web screen, enter the user name 
in 1-byte alphanumeric 
characters and symbols (4 -
15 characters).root
New password When logging into the web  screen, enter the password in 
1-byte alphanumeric 
characters and symbols (4 -
15 characters).system
Confirm new password
For confirmation, enter the 
same password that you 
entered in [New password].system
TCP/IP
DHCP Select whether to turn the  DHCP function on or off. If the 
function is on, because the IP 
address is acquired from the 
server, it is not possible to 
enter the [IP address], 
[Subnet mask], and [Default 
gateway].OFF
IP address Enter the IP address of the  projector in 1-byte numbers.192.168.254.254
Subnet mask Enter the subnet mask in 1- byte numbers.255.255.255.0
Default gateway Enter the default gateway IP  address in 1-byte numbers.0.0.0.0
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to 
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and 
set the new subnet mask. 
						

							
Completing Computer Settings
182
Specifying Networked Multi-Projection Settings: [NMPJ Password]
From [NMPJ Password] in the settings screen, you can specify the items needed 
for NMPJ authentication. For the setting procedure, refer to “Displaying the 
Network Configuration Screen” ( P177).
Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error 
mails and test mails. For the setting procedure, refer to “Displaying the Network 
Configuration Screen” ( P177).
ItemExplanationFactory default setting
Password Enter the password for  networked multi-projection 
authentication in single-byte 
alphanumeric characters (0-
15 characters).
Confirm password For confirmation, enter the  same password as you 
entered in [Password]. 
						

							
183
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
ItemExplanationFactory default setting
To :
Enter the recipient address for 
error mails in 1-byte 
alphanumeric characters and 
symbols (1 - 63 characters).MailUserAccount
Cc:
Enter the CC address for error 
mails in 1-byte alphanumeric 
characters and symbols (1 - 63 
characters).
From:
Enter the sender address for 
error mails in 1-byte 
alphanumeric characters and 
symbols (1 - 63 characters)[email protected]
SMTP server IP address Ent er the SMTP server IP 
address in 1-byte numbers. 0.0.0.0
SMTP server port number
Enter the SMTP server port 
number in 1-byte numbers (1 - 
65535).25
SNTP server IP address Enter the SNTP server IP  address in 1-byte numbers.0.0.0.0
Time zone Select the time zone where  the projector is used.(GMT) Dublin, Lisbon, 
London
Mail resend interval Enter the interval for  resending mail when an error 
occurred (units: seconds) 
within the range of 0 - 59 
seconds using 1-byte 
numbers.10
Mail resend times Enter the number of times to  resend mail when an error 
occurred within the range of 0 
- 255 using 1-byte numbers.3
Error report Select whether to turn the  error mail sending function on 
or off.OFF 
						

							
Completing Computer Settings
184
Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings screen, you can configure the settings for 
authentication of mail that is sent when an error occurs. For the setting procedure, 
refer to “Displaying the Network Configuration Screen” ( P177).
ItemExplanationFactory default setting
Mail authentication Select the mail authentication  method. If OFF is selected, 
the other mail authentication 
settings cannot be changed.OFF
User name
Enter the user name to use for 
mail authentication in 1-byte 
alphanumeric characters and 
symbols (1 - 63 characters).
Password
Enter the password for mail 
authentication in 1-byte 
alphanumeric characters and 
symbols (1 - 63 characters).
Confirm password  For confirmation, enter the  same password as you 
entered in [Password].
POP3 server IP address Enter the POP3 server IP  address in 1-byte numbers.0.0.0.0
POP3 server port number Enter the POP3 server port  number in 1-byte numbers (1 - 
65535).11 0
POP before SMTP response 
time
Enter the SMTP authentication 
timeout period after POP3 
authentication (units: 
milliseconds) using 1-byte 
numbers (0 - 9999 
milliseconds).300 
						

							
185
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
Sending a Test Mail [Send test mail]
From [Send test mail] in the settings screen, you can send a test mail to the mail 
address that was set in [Mail]. The settings cannot be changed from this screen.
SNMP Settings [SNMP]
From [SNMP] in the settings screen, y ou can configure the settings related to 
control of projectors which use SNMP (S imple Network Management Protocol). For 
the setting procedure, refer to “Displaying the Network Configuration Screen” 
( P177 ).
ItemExplanation
To: The recipient address which was set from [Mail] in the settings screen  (P182 ) is displayed.
Cc: The CC address which was set from [Mail] in the settings screen ( P182) is 
displayed.
From: The sender address which was set from [Mail] in the settings screen ( P182) 
is displayed.
Subject: The predetermined mail title “Canon Projector test” is displayed. 
						

							
Completing Computer Settings
186
Setting Projector Information [Projector info.]
From [Projector info.] in the settings screen, you can set the names and location 
names which are used to identify projectors  when multiple projectors are installed 
on the network. For the setting procedure, refer to “Displaying the Network 
Configuration Screen” ( P177).
ItemExplanationFactory default setting
SNMP Select the SNMP function version. If  OFF is selected, the SNMP function 
will be turned off and the other 
settings in this screen cannot be 
changed. OFF
Receive community Enter the community name which will  receive projector information in 1-byte 
alphanumeric characters and symbols 
(1 - 15 characters). 
Password Enter the community settings  password in 1-byte alphanumeric 
characters and symbols (8 - 15 
characters). It can be set only when 
the SNMP version is V3. 
Confirm password For confirmation, enter the same  password as you entered in 
[Password]. 
ItemExplanationFactory default setting
Projector name Enter the projector name in 1-byte  alphanumeric characters and 
symbols (1 - 63 characters).
Canon Projector001
LocationEnter the projector installation location 
in 1-byte alphanumeric characters and 
symbols (0 - 63 characters).
Some characters such as # cannot be used for [Projector name] and [Location]. 
						

							
187
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
Setting PJLink [PJLink]
From [PJLink] in the settings screen, you can set the PJLink functions which are the 
standard for projector management on a network. For the setting procedure, refer 
to “Displaying the Network Configuration Screen” (P177). For information about 
PJLink, refer to “What is PJLink?” ( P172).
Setting Up a Contro ller Manufactured by  Crestron Electronics 
[Crestron Controller]
From [Crestron Controller] in the settings screen, you can set parameters for 
communication via controllers manu factured by Crestron Electronics.
ItemExplanationFactory default 
setting
PJLink Turn the PJLink function on or off. If  OFF is selected, the PJLink function 
will be turned off and the other settings 
in this screen cannot be changed. ON
PJLink authentication Select whether to turn the PJLink  authentication function on or off. If OFF 
is selected, [Password] and [Confirm 
password] cannot be changed. ON
Password Enter the PJLink authentication  password in 1-byte alphanumeric 
characters (1 - 32 characters). system
Confirm password For confirmation, enter the same  password that you entered in 
[Password]. system 
						

							
Completing Computer Settings
188
Setting Errors
When a setting-related error occurs, the error name is displayed on the screen, and 
a “!” mark is displayed next to the input field which caused the error.
The error meanings are as shown below.
ItemExplanationFactory default setting
IP ID Specify the controller’s IP ID. 3
IP address Specify the controller’s IP address. 127.0.0.1
Port number Specify the controller’s port number. 41794
ErrorMeaning
Input error A setting outside the valid range was set on the  settings screen.
Password setting error The set passwor d and confirmation password did 
not match.
Invalid SMTP The SMTP server IP address has not been set.
System failed to connect SMTP server. Failed to connect to the SMTP server when  sending a test mail.
System failed to connect POP3 server. Failed to connect to the POP3 server attempting  to send a test mail.
System doesn’t support this auth type. An authentication type was set which is not  supported by the server.
System failed to authenticate. Authentication failed attempting to send a test  mail.
The system failed to send the test mail. Sending of test mail failed due to a connection  failure with the SMTP server or an error which 
does not ordinarily occur.
Unknown error Unknown error 
						

							
189
Completing Computer Settings
Installation and Maintenance
Connecting to a Network
Resetting Network Settings to the Default Settings
1Perform steps 1 - 3 on “Displaying the Network Configuration Screen” 
(P177 ) to display the settings screen.
2Click [Initialize].
3A confirmation window appears. Click [OK].  
						

							
Completing Computer Settings
190
■Error notification mails
The messages shown in the following error list are sent when an error occurs in the 
projector.
Error list
Errors related to 
temperature Error name Temperature abnormality
Text The temperature inside the projector is too high for some  reason or the outside air temperature is higher than the 
specified one.
If the problem is inside the projector, check whether the 
projector is installed and operated normally, turn off the 
projector to cool its inside, and retry projection. If the same 
warning occurs again, the projector may be defective. 
Contact your dealer.
Errors related to 
the lamp Error name Faulty lamp
Text The lamp has burnt out. Replace the lamp with a new one.  If the same warning occurs again, the lamp drive circuit 
may be defective. Contact your dealer.
Errors related to 
the fan Error name Faulty cooling fan
Text The cooling fan or another component may be defective.  Contact your dealer.
Errors related to 
the air filter Error name Faulty air filter unit
Text The air filter unit is not installed properly. Check whether the air filter unit is installed properly. 
If it is installed properly, the air filter unit detection switch 
may be defective. Contact your dealer.
Errors related to 
the power Error name Faulty power supply
Text The voltage of part of the power supply is abnormally high  or any other problem has occurred in the power supply. 
Contact your dealer.