Canon scanner imageFORMULA ScanFront 300P User Manual

							5-4
Chapter 5   Operating Procedures
3.Login Screen
The login screen appears at the startup when the scanner is turned ON.
❏Login Screen Types
There are two types of login screen: a list type login screen 
for selecting from a list of registered users, and a key in 
type login screen for entering a user name and password. 
List Type Login Screen
Key in Type Login Screen
Hint
 Set the type of login screen from [Device Operation] of the 
Web menu (see p. 6-31) or [Login type setting] in the 
administrator settings of the ScanFront (see p. 3-10). 
 Fingerprint authentication is enabled when you are using the 
ScanFront 300P. (See “Fingerprint Authentication (Only 
Available with the ScanFront 300P)” on p. 5-7.)
❏When Using Server Authentication
The login screen when you use server authentication is a 
key in type, and a list box is displayed for selecting Device 
Authentication and Server Authentication.
IMPORTANT
When you use server authentication to log in, you are registered 
as a new user of server authentication. 
						

							5-5
Chapter 5   Operating Procedures
❏List Type Login
Use the procedure below to log in to the list type login 
screen. 
1.Select the user to log in as from the list, and then 
press [Next]. 
The password input screen appears. 
2.Press [Password]. 
The keyboard screen appears. 
3.Enter a password and then press [OK]. 
IMPORTANT
Passwords are case-sensitive. Make sure to enter the password 
correctly.
4.Press [Login] to log in to the scanner. 
5.The Home screen (or Job Button screen) appears.  
						

							5-6
Chapter 5   Operating Procedures
❏Key in Type Login
In the key in type login screen, enter your user name and 
password to log in. 
1.Press [User name] ([Password]).
The keyboard screen appears. 
2.Enter your user name (password) and then press 
[OK]. 
IMPORTANT
 User names and passwords are case-sensitive. Make sure to 
enter the user and password registered during device 
authentication correctly. 
 If you do not know the user name and password registered for 
server authentication, contact the domain server 
administrator. 
3.Press [Login] to log in to the scanner. 
4.The Home screen (or Job Button screen) appears.  
						

							5-7
Chapter 5   Operating Procedures
❏Fingerprint Authentication (Only 
Available with the ScanFront 300P)
Use the procedure below for fingerprint authentication. 
For details on fingerprint registration, see “Fingerprint 
Registration (Only Available with the ScanFront 300P)” 
on p. 5-10.
1.Perform fingerprint authentication using the finger 
with the registered fingerprint. 
IMPORTANT
Perform finger authentication by gently pressing the finger while 
slowly sweeping it at a constant speed to scan the fingerprint. 
2.The Home screen (or Job Button screen) appears if 
the fingerprint is authenticated correctly.
Hint
 When fingerprint authentication fails, the cause of the failure 
and a solution appear on the screen. Follow the instructions in 
the solution, and perform fingerprint authentication again.
 If a user fingerprint is registered for server authentication, and 
the user password is changed on the server while the user is 
logged in via fingerprint authentication, the following message 
will appear on the screen. In this case, without using 
fingerprint authentication, enter your user name and changed 
password to log in, and then re-register your fingerprints. 
						

							5-8
Chapter 5   Operating Procedures
4.Screen Displayed after Login
You can set the screen (Home screen or Job Button screen) that is displayed after a user logs in. (See p. 6-7 and p. 8-4.)
❏Home Screen
aSelect destination (E-mail, FTP, FAX, Shared 
folder, USB memory, and Printer) buttons
These buttons open an address selection screen. (See 
“Scanning Procedures” on p. 5-13.)
Hint
 The USB memory button is enabled when USB memory is 
inserted in a USB port.
 [Printer] is enabled when the ScanFront is connected to a 
network environment that is running ScanFront Service.
b[User settings] button
Enables setting of the user password and fingerprint 
registration (only with the ScanFront 300P). (See “User 
Settings Screen” on p. 5-9.)
c[Administrator setting] button
Opens the Administrator Settings screen. For details, 
see “Configuring Administrator Settings” on p. 3-8. 
IMPORTANT
If a user whose use of the Home screen is restricted logs in, the 
Home screen is not available. For details, contact the 
administrator.
❏Job Button Screen
This screen enables you to select a job button to scan using 
the conditions registered to the job button, and then send 
the image file. (See “Scanning Procedures” on p. 5-13.)
IMPORTANT
 The document is scanned immediately after you press the job 
button. Make sure to place your document before you press 
the job button. (See “Placing Documents” on p. 2-6.)
 Perform job button registration and editing via the Web menu. 
 If you are unable to edit a job button, the editing of job buttons 
has been restricted by the ScanFront administrator. For 
details, contact the administrator. 
a
cb 
						

							5-9
Chapter 5   Operating Procedures
5.User Settings Screen
The User Settings screen enables you to edit the user password and register a fingerprint (only available with the ScanFront 300P). 
❏Change Password
You can register a new user password or change a user 
password registered via the Web menu. 
Hint
The old password does not need to be entered in order to 
change a password. The new password that you entered is 
registered. 
❏Fingerprint Registration
Fingerprint registration is enabled when you are using the 
ScanFront 300P. For details on fingerprint registration, see 
“Fingerprint Registration (Only Available with the 
ScanFront 300P)” on p. 5-10.  
						

							5-10
Chapter 5   Operating Procedures
6.Fingerprint Registration (Only Available with the ScanFront 300P)
Fingerprint authentication is a function for registering the fingerprints of users that will log in when the device authentication or 
server authentication method is used, and enables users to log in by authenticating their fingerprints. When fingerprint 
authentication is used, there is no need to select a user in the list type login screen or enter a user name and password in the key in 
type login screen. For details on handling the fingerprint sensor, see “Fingerprint Sensor (ScanFront 300P)” on p. 2-11. 
❏Fingerprint Authentication
●Follow the procedure below to use fingerprint 
registration and authentication. 
1. Align the first joint of a finger on the sensor and 
press the finger on the fingerprint sensor. 
2. Keep the finger pressed while slowly sliding it 
straight at a constant speed to scan the 
fingerprint. 
 
●Fingerprint authentication uses the unique 
information of fingerprints. The fingerprint 
authentication function may not work properly for a 
finger with a fingerprint that is worn down or has 
few distinguishable features.
●The same finger needs to be scanned three times 
to register the fingerprint. ●The authentication performance differs depending 
on the condition of the fingerprint when it is 
registered and when it is authenticated. The 
following conditions may cause an error in 
fingerprint authentication:
– The finger is wet or sweaty
– The finger is dirty
– The grooves of the fingerprint are filled with 
sweat or oil
– The finger is dry (dry skin)
– Part of the fingerprint is missing because of, for 
example, a wound or burn injury
– The fingerprint has worn thin
●Authentication performance may improve if the 
condition of the fingerprint is improved as a result 
of washing your hands or applying hand cream.
●Authentication may not be performed properly 
depending on the speed with which you slide your 
finger over the sensor. In this case, adjust the 
speed with which you slide your finger in 
accordance with the message that appears. 
●Fingerprint authentication does not necessarily 
guarantee the authentication and verification of the 
identity of a person.  
						

							5-11
Chapter 5   Operating Procedures
❏Registering a Fingerprint
Register a fingerprint from the User Settings screen 
accessed from the Home screen. 
IMPORTANT
If the Home screen is not displayed, use of the Home screen 
has been restricted for the user by the ScanFront administrator. 
Confirm this with the administrator. 
1.Press [User settings]. 
The User Settings screen appears. 
2.Press [Fingerprint Registration]. 
The Fingerprint Registration screen appears. 
3.Scan your fingerprint. 
Repeat scanning until the same fingerprint has been 
successfully scanned three times. 
IMPORTANT
 If any of the messages below appears, there was an error 
scanning the fingerprint. Try scanning your fingerprint again. 
– Failed to read fingerprint. Please try again. 
– Sweep speed was too fast. Please sweep more slowly. 
– Sweep speed was too slow. Please sweep more faster. 
 If any of the messages below appears, start fingerprint 
registration again from the beginning. 
– Can not verify the fingerprint data. Start registration again. 
– Time out error has occurred. Start registration again. 
4.After you have successfully scanned your fingerprint 
three times, press [Register/Test]. 
The Test Mode screen appears.  
						

							5-12
Chapter 5   Operating Procedures
5.Perform an authentication test for the registered 
fingerprint by scanning your fingerprint. 
6.Press [Close] to end fingerprint registration. 
IMPORTANT
If you want to change the registered fingerprint, start registration 
again from the beginning.  
						

							5-13
Chapter 5   Operating Procedures
7.Scanning Procedures
You can perform scanning from the Home screen or the Job Button screen. 
❏Scanning From the Home Screen
Press a destination selection (E-mail, FTP, Fax, Shared 
folder, or USB memory) button to open an address 
selection screen and then select an address to send an 
image file. 
If you press the USB memory destination selection button, 
press [Downward] and specify the folder in the USB 
memory to which you want to save the image file. 
If you press the Printer destination selection button, 
configure the printer settings.
IMPORTANT
If the network environment to which the ScanFront is connected 
is not running ScanFront Service, [Printer] is grayed out and 
cannot be selected.
If you select an address and then press [Next], the Scan/
Delivery Options screen appears. Set the scanning 
conditions and then start scanning.