Canon scanner imageFORMULA DRX10C User Manual

8-23
Chapter 8   ISIS/TWAIN Driver Settings
Code 39 
Detect Code 39 barcodes. 
[Enable]
Detect and read Code 39 barcodes. 
[Full Ascii]
Read barcodes in Full ASCII Code. 
[Checksum]
Read the checksum included in barcodes.
[Output Checksum]
This check box is enabled when [Checksum] is selected, 
and outputs the read checksum.
[Output ST/SP]
Select this check box to output Start and Stop codes.
Codabar
Detect Codabar barcodes. 
[Enable]
Detect and read Codabar barcodes. 
[Checksum]
Read the checksum...

8-24
Chapter 8   ISIS/TWAIN Driver Settings
UPC
Detect UPC-A/UPC-E barcodes. 
[Enable] Check Box
Detect and read UPC-A/UPC-E barcodes. 
[Addon]
Set how to handle addon codes included in barcodes.
Off: Ignore addon codes.
On: Read addon codes.
Auto: Detect and read addon codes automatically. 
[Checksum]
This check box is enabled when [Checksum] is selected, 
and outputs the read checksum. 
[Output Header]
Select this check box to output header codes.
Hint
 To detect barcodes with and without add-on codes...

8-25
Chapter 8   ISIS/TWAIN Driver Settings
The [Post Imprinter] tab sheet allows you to imprint/add any 
character string or counter on scanned documents. 
The [Imprinter] check box is enabled only if the optional pre-
imprinter unit is installed.
■[Pre Imprinter] and [Post Imprinter] Tab Sheet 
Settings
You can configure the following settings on the [Pre 
Imprinter] and [Post Imprinter] tab sheets. 
Check Boxes
[Imprinter] Check Box
Configure settings for imprinting any character string or 
counter on...

8-26
Chapter 8   ISIS/TWAIN Driver Settings
[Double counter with number of characters] 
abbreviation: 
A dialog box appears in which to specify the number of 
characters of the double counter. A counter of the specified 
number of characters will be imprinted or added on 
scanned images.
[Current time] abbreviation: 
Imprint/add the time of scanning using 8 digits in 24-hour 
format.
[Date (Month/Day/Year)] abbreviation: 
Imprint/add the date of scanning using 10 digits in Month/
Day/Year format.
[Date...

8-27
Chapter 8   ISIS/TWAIN Driver Settings
Orientation
Specify the orientation of characters to be imprinted or 
added.
Hint
Text orientation relative to the feeding direction is as follows.
Imprinter Font
Specify the font size of characters to be imprinted or 
added.
[Expand character spacing]
Select this check box to expand the spacing between 
printed or added characters.
Addon Type
Specify the method in which text is added on to the image.
[Black on White]
Add black text on to a white...

8-28
Chapter 8   ISIS/TWAIN Driver Settings
■[First Counter] and [Second Counter] Dialog 
Boxes
Make settings for add-on counters.
[Start Value]
Enter the start value for the counter.
[Increment]
Enter the increment value for the counter. The counter 
increases by the value entered here.
[Increment Trigger]
Specifies the type of event that triggers a counter 
increment.
[New File] (ISIS driver only)
The counter increases when a batch separation occurs 
according to the Batch Separation settings on the...

Chapter 9   Job Registration Tool Settings
1. Before Use ....................................................... 9-2
Job Function..........................................................9-2
Starting the Job Registration Tool .........................9-2
2. Job Registration Tool ....................................... 9-3
3. Settings Dialog Boxes...................................... 9-5
[New/Editing] Dialog Box.......................................9-5
[Admin] Dialog...

9-2
Chapter 9   Job Registration Tool Settings
1.Before Use
The Job Registration Tool is an application for registering jobs that can be executed from the [Job] key on the control panel. This 
chapter describes the settings for the Job Registration Tool. For details on the Job Function, see “About the Job Function” (see 
p. 3-14).
Job Function
The job function is for using the [Job] key on the control panel 
to select and execute jobs registered by Job Registration Tool, 
and allows you to execute...

9-3
Chapter 9   Job Registration Tool Settings
2.Job Registration Tool
The Job Registration Tool consists of the main window below and the [New/Editing] and [Admin] dialog boxes. For details on the 
dialog boxes, see the description of each dialog box.
Menu Bar
[Edit] Menu
Select a job from the job list, and register a new job or edit, 
copy, or delete the job. (See “[New/Editing] Dialog Box” 
on p. 9-5.)
Hint
 If you select a registered job, [Copy] and [Delete] are enabled. 
Selecting [Copy] displays...

9-4
Chapter 9   Job Registration Tool Settings
Job List
Displays the job numbers (01 to 99) and job titles. 
Job Information
Displays the information for the job selected in the job list. 
[Close] Button
Ends the Job Registration Tool.