Canon scanner imageFORMULA DRX10C User Manual

8-3
Chapter 8   ISIS/TWAIN Driver Settings
4.Select the default page size.
IMPORTANT
 Clicking the [Default] in the ISIS Driver Properties dialog box, 
the setting is applied here.
 For the TWAIN driver, the default paper size is LTR/A4 and 
cannot be changed.
5.Click [OK] to finish scanner selection.
6.From the [Scan] menu, select [Scanner Setting].The Properties dialog box for the ISIS driver opens.
Hint
For details on the ISIS Driver Settings dialog box, see “ISIS/
TWAIN Driver Settings Dialog Box” on...

8-4
Chapter 8   ISIS/TWAIN Driver Settings
2.ISIS/TWAIN Driver Settings Dialog Box
The ISIS/TWAIN Driver Settings dialog box consists of the standard tab sheets [Basic], [Brightness], [Image processing], [Others], 
and [Post Imprinter], and the optional tab sheet [Pre Imprinter]. See the description of each tab sheet for details.
ISIS Driver Settings Dialog Box
TWAIN Driver Settings Dialog BoxBasic Tab Sheet (See p. 8-5)
[Brightness] Tab Sheet (See p. 8-12)
[Image processing] Tab Sheet (See p. 8-15)...

8-5
Chapter 8   ISIS/TWAIN Driver Settings
Basic Tab Sheet 
You can set basic scan conditions on the [Basic] tab sheet. The 
items that can be set vary depending on the application program 
you are using. Specify the settings as necessary for the screen that 
is displayed.
■[Basic] Tab Sheet Types
The following types of Basic tab sheets can be displayed. 
Basic Tab (ISIS/TWAIN driver)
This [Basic] tab sheet is displayed for application 
programs such as CapturePerfect and Job Registration 
Tool....

8-6
Chapter 8   ISIS/TWAIN Driver Settings
■[Basic] Tab Sheet Settings
You can configure the following settings on the [Basic] tab 
sheet. 
User Preference
Click [Save] to open the [Save User Preference] dialog 
box.
The [Save User Preference] dialog box saves the current 
settings under an assigned name.
You can select the name of a saved set of user preferences 
in the list box to load those settings into each tab sheet.
IMPORTANT
Assigned names can consist of up to 32 characters (or 16 
double-byte...

8-7
Chapter 8   ISIS/TWAIN Driver Settings
[Auto Color Detection]
The document is detected as black-and-white or color 
before the scanned image is saved. 
Selecting this mode enables the [Setting] button for 
opening the [Auto Image Type Detection Settings] dialog 
box, where you can make settings for auto image type 
detection. (See “[Auto Image Type Detection Settings] 
Dialog Box” on p. 8-10.)
IMPORTANT
Depending on the application program, operation may become 
unstable when [Auto Color Detection]...

8-8
Chapter 8   ISIS/TWAIN Driver Settings
Hint
 When the [Scan Options] on the [Basic] tab sheet is set to 
[Scan Single Page] for the TWAIN driver, the scanning side is 
set to [Simplex] and cannot be changed. (See “[Scan Options] 
(TWAIN driver only)” on p. 8-9.)
 Selecting [Skip Blank Page] enables the [Setting] button, 
which opens the [Blank Skip Setting] dialog box.
 Adjust the [Content density] setting in the [Blank Skip Setting] 
dialog box if you specify [Skip Blank Page], but blank pages 
are...

8-9
Chapter 8   ISIS/TWAIN Driver Settings
IMPORTANT
 Selecting [High-Quality Moire Reduction] produces high-
quality images, but the scanning speed is slower. 
 If [High-Quality Moire Reduction] is selected, [Auto-detection] 
is selected for the document size, the color mode is set to [24-
bit Color], and the scanning side is [Duplex], the scanner may 
run out of memory and be unable to scan the entire document. 
If this occurs, enable [Speed Priority] and scan images of 
lower quality, or set the...

8-10
Chapter 8   ISIS/TWAIN Driver Settings
■Mode-Dependent Function Limitations
The following tab sheet functions are partially disabled 
according to the selected mode. For details on the 
[Brightness] tab sheet settings, see “[Brightness] Tab 
Sheet” on p. 8-12. 
✔ : available for setting, – : not available for setting, or auto
■[Auto Image Type Detection Settings] Dialog 
Box
This dialog box appears when you select [Auto Color 
Detection], and enables you to make settings for detecting 
whether...

8-11
Chapter 8   ISIS/TWAIN Driver Settings
■[Scan Area] Dialog Box
In this dialog box you can define the area of the document 
page to scan on a selected page size, and register non-
standard document page sizes.
The Scan Area dialog box is different for ISIS and TWAIN 
drivers: for the TWAIN driver, one of two dialog box types 
is displayed, depending on the application program used.
Scan Area Dialog Box (ISIS Driver)
Scan Area Dialog Box (TWAIN Driver)
This dialog box appears with application programs...

8-12
Chapter 8   ISIS/TWAIN Driver Settings
Area Window
The size indicated for the Area panel corresponds to the 
page size setting, and the area within the panel indicates 
the current scanning area.
Hint
 The scanning area can be adjusted by dragging the handles 
(■) bordering the Area panel with your mouse.
 With CapturePerfect, the last scanned image appears in the 
Area panel.
Margin
This control adjusts the top, bottom, left, and right margins 
around the scanning area so that you can expand the...