Canon scanner imageFORMULA DRG1130 User Manual

ii
Software
Table of ContentsChapter 8   ISIS/TWAIN Driver Settings
1. ISIS/TWAIN Driver Settings Dialog Box ........... 8-2Dialog box buttons ................................................ 8-2
[Basic] Tab Sheet ................................................. 8-2
[Brightness] Tab Sheet ......................................... 8-4
[Image processing] Tab Sheet.............................. 8-4
[Feeding] Tab Sheet ............................................. 8-5
[Others] Tab Sheet...

Chapter 8   ISIS/TWAIN Driver Settings
1. ISIS/TWAIN Driver Settings Dialog Box .......... 8-2Dialog box buttons ................................................8-2
[Basic] Tab Sheet ..................................................8-2
[Brightness] Tab Sheet..........................................8-4
[Image processing] Tab Sheet ..............................8-4
[Feeding] Tab Sheet..............................................8-5
[Others] Tab Sheet ................................................8-6...

8-2
Chapter 8   ISIS/TWAIN Driver Settings
1.
ISIS/TWAIN Driver Settings Dialog Box
If menus or buttons are selected to configure the scanner settings from an application tool such as CapturePerfect 3.1 or the Job 
Registration Tool, the following ISIS/TWAIN Driver Settings dialog box is displayed. The ISIS/TWAIN Driver Settings dialog box 
consists of the standard tab sheets [Basic], [Brightness], [Image processing], [Feeding], [Others], and [Imprinter/Addon Dialog].
Hint
See “CapturePerfect 3.1” on p....

8-3
Chapter 8   ISIS/TWAIN Driver Settings
■Checking the basic Scanning Conditions 
When scanning the documents, make sure to set the Color 
mode, Paper Size, Dots per inch, and Scanning Side 
in the basic conditions on the Basic tab.  
Color mode Select the mode for scanned images.Hint• Some functions are limited depending on the color mode 
setting. 
• Advanced text enhancement modes are useful if you want to 
scan documents with a background color or design behind the 
text as black-and-white images,...

8-4
Chapter 8   ISIS/TWAIN Driver Settings
• Select [Folio] to fold the document in two before setting, to 
enable front and back images created during duplex scanning 
to be synthesized in a single sheet image. (See p. 10-3) 
[Brightness] Tab SheetOn the [Brightness] tab sheet you can adjust brightness and 
contrast for scanning, and access gamma settings. The 
availability of brightness and contrast settings depends on the 
mode setting of the [Basic] tab sheet. 
Hint• If all of the settings on the...

8-5
Chapter 8   ISIS/TWAIN Driver Settings
[Feeding] Tab SheetThe [Feeding] tab sheet provides settings for different feeding 
options. Options such as double feed detection and staple 
detection can be set. 
Double Feed Detection
This function stops document transport when double 
feeding of document pages is detected, and enables you to 
select the detection method to suit the type of documents 
to be scanned. 
[Detect by Length]
This method of double feed detection is useful for batch 
scanning of...

8-6
Chapter 8   ISIS/TWAIN Driver Settings
[Others] Tab SheetThe settings on the [Others] tab sheet are different for the ISIS 
and TWAIN drivers. Some settings may be disabled, 
depending on the mode settings on the [Basic] tab sheet. 
Hint
[Batch Separation] is the function to be set in the ISIS driver, so it 
is not displayed in the TWAIN driver.[Rapid Recovery System] Check Box
If a paper jam causes paper transport to stop while 
scanning, scanning stops without sending an error 
notification to the...

Chapter 9   Job Registration Tool Settings
1. Before Use ....................................................... 9-2Job Function..........................................................9-2
Starting the Job Registration Tool .........................9-22. Job Registration Tool ....................................... 9-3
3. Settings Dialog Boxes...................................... 9-4[New/Editing] Dialog Box.......................................9-4
[Admin] Dialog...

9-2
Chapter 9   Job Registration Tool Settings
1.
Before Use
The Job Registration Tool is an application for registering jobs that can be executed from the [Job] key on the control panel. This 
chapter describes the settings for the Job Registration Tool. For details on the Job Function, see “About the Job Function” on p. 3-13.Job FunctionThe job function is for using the [Job] key on the control panel 
to select and execute jobs registered by Job Registration Tool, 
and to implement scans.  
Hint
• Job...

9-3
Chapter 9   Job Registration Tool Settings
2.
Job Registration Tool
The Job Registration Tool consists of the main window below and the [New/Editing] and [Admin] dialog boxes. For details on the 
dialog boxes, see the description of each dialog box.
Menu Bar
[Editing] Menu
Select a job from the job list, and register a new job or edit, 
copy, or delete the job. (See “[New/Editing] Dialog Box” 
on p. 9-4.)
Hint
• If you select a registered job, [Copy] and [Delete] are enabled. 
Selecting [Copy]...