Canon scanner imageFORMULA DRG1100 User Manual

							ii
Software
Table of ContentsChapter 8   ISIS/TWAIN Driver Settings
1. ISIS/TWAIN Driver Settings Dialog Box ........... 8-2Dialog box buttons ................................................ 8-2
[Basic] Tab Sheet ................................................. 8-2
[Brightness] Tab Sheet ......................................... 8-4
[Image processing] Tab Sheet.............................. 8-4
[Feeding] Tab Sheet ............................................. 8-5
[Others] Tab Sheet ............................................... 8-6
[Imprinter/Addon Dialog] Tab Sheet ..................... 8-6
Chapter 9   Job Registration Tool Settings
1. Before Use ....................................................... 9-2Job Function ......................................................... 9-2
Starting the Job Registration Tool ........................ 9-22. Job Registration Tool ....................................... 9-3
3. Settings Dialog Boxes ...................................... 9-4[New/Editing] Dialog Box ...................................... 9-4
[Admin] Dialog Box ............................................... 9-7
Chapter 10   Practical Examples
1. Practical Examples ......................................... 10-2Scanning Documents of Unregistered 
Page Sizes ......................................................... 10-2
Specifying the Scanning Area ............................ 10-4
Configuring Scanner Settings According 
to the Purpose .................................................... 10-5
Registering Your Settings ................................. 10-10 
						

							Chapter 8   ISIS/TWAIN Driver Settings
1. ISIS/TWAIN Driver Settings Dialog Box .......... 8-2Dialog box buttons ................................................8-2
[Basic] Tab Sheet ..................................................8-2
[Brightness] Tab Sheet..........................................8-4
[Image processing] Tab Sheet ..............................8-4
[Feeding] Tab Sheet..............................................8-5
[Others] Tab Sheet ................................................8-6
[Imprinter/Addon Dialog] Tab Sheet ......................8-6 
						

							8-2
Chapter 8   ISIS/TWAIN Driver Settings
1.
ISIS/TWAIN Driver Settings Dialog Box
If menus or buttons are selected to configure the scanner settings from an application tool such as CapturePerfect 3.1 or the Job 
Registration Tool, the following ISIS/TWAIN Driver Settings dialog box is displayed. The ISIS/TWAIN Driver Settings dialog box 
consists of the standard tab sheets [Basic], [Brightness], [Image processing], [Feeding], [Others], and [Imprinter/Addon Dialog].
Hint
See “CapturePerfect 3.1” on p. 3-14 for the procedure for executing scans from the scanning application.Dialog box buttons ■[OK] button
Applies the settings and closes the dialog box.
Hint
When you use an application program that scans from the 
TWAIN Driver Settings dialog box, [Scan] is displayed instead 
of [OK] to scan with the configured settings. 
■[Cancel] button
Rejects the changes to settings and closes the dialog box.
■[Default] button
Returns the settings to their default state.
■[Help] button
Displays the Help screen for the open tab sheet and dialog 
box.
[Basic] Tab Sheet You can set basic scan conditions on the [Basic] tab sheet. The 
items that can be set vary depending on the application program 
you are using. Specify the settings as necessary for the screen that 
is displayed. 
IMPORTANT
• When you use a TWAIN-compatible application program that 
scans from the settings dialog box, [Scan] is displayed instead of 
[OK].
Hint
• The scan conditions may be set using unique application 
windows depending on applications which have compatibility 
with ISIS. If opening the scanner drivers using the application, 
the settings for the functions supplied by the scanner drivers 
other than the scan conditions will be displayed in the [basic] 
tab.  
						

							8-3
Chapter 8   ISIS/TWAIN Driver Settings
■Checking the basic Scanning Conditions 
When scanning the documents, make sure to set the Color 
mode, Paper Size, Dots per inch, and Scanning Side 
in the basic conditions on the Basic tab.  
Color mode Select the mode for scanned images.Hint• Some functions are limited depending on the color mode 
setting. 
• Advanced text enhancement modes are useful if you want to 
scan documents with a background color or design behind the 
text as black-and-white images, and remove or process the 
surrounding background to enhance the text for easy reading. 
• Two advanced text enhancement modes are provided to suit 
different background types. Select the mode that best suits 
your document. We recommend confirming the image by 
prescanning the first page.
• When saving an image file in JPEG format, select [256-level 
Gray] or [24-bit Color]. 
Page Size
Select the page size of the document to be scanned.
IMPORTANT
• Select [Match original size] to scan the following types of 
documents. 
– Documents of a non-standard size– Documents containing pages of different sizes
– When using the Long Document mode (See “Long 
Document Mode Setting” on p. 3-3.)
•  When [Match original size] is selected, the area settings in the 
Scan Area dialog box are disabled. 
• The [Match original size] process may malfunction in the 
following situations.  If this occurs, select a standard size 
(such as [A4] or [Letter]), or click the [Area] button to create a 
custom page size.
– When scanning a page with a dark area at the left or right 
edge
– When scanning a glossy or reflective document
– When the brightness setting is incorrect
– When the Custom setting is selected in the Gamma Settings 
dialog box
• Depending on the application program, operation may 
become unstable when [Match original size] is enabled.  In 
that case, [Match original size] should be disabled.
Dots per inch
Select the scanning resolution.
Hint
• Higher resolutions provide clearer images, but produce larger 
files.
• The [Moire Reduction] setting is enabled when the resolution 
is set to 300 dpi or lower, and the [Image Quality] setting is 
enabled when the resolution is set to 400 or 600 dpi.  
Scanning Side
Select which page side(s) to scan.
Hint
• Select [Skip blank pages] to delete the blank page images 
before saving.  
						

							8-4
Chapter 8   ISIS/TWAIN Driver Settings
• Select [Folio] to fold the document in two before setting, to 
enable front and back images created during duplex scanning 
to be synthesized in a single sheet image. (See p. 10-3) 
[Brightness] Tab SheetOn the [Brightness] tab sheet you can adjust brightness and 
contrast for scanning, and access gamma settings. The 
availability of brightness and contrast settings depends on the 
mode setting of the [Basic] tab sheet. 
Hint• If all of the settings on the [Brightness] tab sheet are disabled, 
the gamma setting is set to Custom. 
• Set gamma compensation when the color tone of the scanned 
image and the color tone of the image displayed on the 
monitor are different. 
• Refer to the user manual enclosed with the monitor for the 
gamma values for the monitor used. 
[Image processing] Tab SheetThe [Image processing] tab sheet provides settings that affect 
the processing of scanned images. Some settings may be 
disabled, depending on the mode settings on the [Basic] tab 
sheet. For examples of Image processing tab use, (See 
“Configuring Scanner Settings According to the Purpose” on 
p. 10-5). 
						

							8-5
Chapter 8   ISIS/TWAIN Driver Settings
[Feeding] Tab SheetThe [Feeding] tab sheet provides settings for different feeding 
options. Options such as double feed detection and staple 
detection can be set. 
Double Feed Detection
This function stops document transport when double 
feeding of document pages is detected, and enables you to 
select the detection method to suit the type of documents 
to be scanned. 
[Detect by Length]
This method of double feed detection is useful for batch 
scanning of same-size documents. The length of the first 
document page fed is measured as a standard, and if a 
subsequent document is detected to be 35 mm (1.4) 
longer (or shorter) than the standard, a double feed is 
judged to have occurred, and document transport is 
stopped.
[Detect by Ultrasonic]
This method of double feed detection is useful for batch 
scanning of different-size documents. When the ultrasonic 
sensor detects overlapping documents and spacing 
between documents, a double feed is judged to have 
occurred, and document transport is stopped. 
Hint
Both detection methods can be used together. 
■Staple Detection
When sensors at both sides of the feed inlet detect the bent 
corner of a stapled document, an error message appears 
and feeding stops.
IMPORTANT
• Staple detection detects the bent corner that occurs when one 
of the four corners of a document has been stapled. 
• Staple detection may not operate properly in the following 
cases where bending does not occur in documents.
– The document is stapled at two or more corners.
– The document is size smaller than STMT/A5.
– The position of the left or right document guide has been 
changed, and the document has been shifted to the left or 
right side. (See “Adjusting the Document Guides” on p. 3-7.)
– When feeding document manually 
						

							8-6
Chapter 8   ISIS/TWAIN Driver Settings
[Others] Tab SheetThe settings on the [Others] tab sheet are different for the ISIS 
and TWAIN drivers. Some settings may be disabled, 
depending on the mode settings on the [Basic] tab sheet. 
Hint
[Batch Separation] is the function to be set in the ISIS driver, so it 
is not displayed in the TWAIN driver.[Rapid Recovery System] Check Box
If a paper jam causes paper transport to stop while 
scanning, scanning stops without sending an error 
notification to the application program. After fixing the 
cause of the stoppage, you can continue scanning.
[Imprinter/Addon Dialog] Tab SheetThe [Imprinter/Addon Dialog] tab sheet allows you to 
imprint/add any character string or counter on scanned 
documents. 
The [Imprinter] check box is enabled only if the optional 
imprinter unit is installed. 
						

							Chapter 9   Job Registration Tool Settings
1. Before Use ....................................................... 9-2Job Function..........................................................9-2
Starting the Job Registration Tool .........................9-22. Job Registration Tool ....................................... 9-3
3. Settings Dialog Boxes...................................... 9-4[New/Editing] Dialog Box.......................................9-4
[Admin] Dialog Box................................................9-7 
						

							9-2
Chapter 9   Job Registration Tool Settings
1.
Before Use
The Job Registration Tool is an application for registering jobs that can be executed from the [Job] key on the control panel. This 
chapter describes the settings for the Job Registration Tool. For details on the Job Function, see “About the Job Function” on p. 3-13.Job FunctionThe job function is for using the [Job] key on the control panel 
to select and execute jobs registered by Job Registration Tool, 
and to implement scans.  
Hint
• Job registration stores scanning condition settings, image file 
format selection, save destination and image data processing 
settings for each job to be used with the Job Function. 
• Up to 99 jobs can be registered with the Job Registration Tool. Starting the Job Registration ToolFollow the procedure below to start the Job Registration Tool. 1.
Click the [Start] button, and then click [All Programs] 
- [Canon DR-XXXX] - [Job Registration Tool]. (XXXX 
varies depending on the model you are using)
 
Hint
In Windows 8, the job registration tool is saved to the following 
location.The Job Registration Tool starts. 
						

							9-3
Chapter 9   Job Registration Tool Settings
2.
Job Registration Tool
The Job Registration Tool consists of the main window below and the [New/Editing] and [Admin] dialog boxes. For details on the 
dialog boxes, see the description of each dialog box.
Menu Bar
[Editing] Menu
Select a job from the job list, and register a new job or edit, 
copy, or delete the job. (See “[New/Editing] Dialog Box” 
on p. 9-4.)
Hint
• If you select a registered job, [Copy] and [Delete] are enabled. 
Selecting [Copy] displays the following dialog box. Specify the 
job number to copy to and job title, and click the [OK] button to 
copy the job to the specified job number. 
• Selecting [Delete] displays a confirmation message. • The items of the [Editing] menu are also displayed in a 
submenu when you right-click a job. 
[Admin] Menu
Open the [Admin] dialog box to configure settings for 
monitoring the storage folder for images and backing up 
job data. (See “[Admin] Dialog Box” on p. 9-7.)
[Help] Menu
Display the help and version of the Job Registration Tool.
Job ListDisplays the job numbers (01 to 99) and job titles. 
Job InformationDisplays the information for the job selected in the job list. 
[Close] ButtonEnds the Job Registration Tool.