Canon scanner CanoScan 4400F User Manual

QT5-0618-V03 ©CANON INC. 2007 PRINTED IN CHINA
IMPRIME EN CHINE
Quick Start Guide
Guide de démarrage rapide
Schnellstart-Referenz
Guida rapida all’installazione
Guía de inicio rápido
Guia de Início Rápido
Aan de Slag gids
English
Deutsch
Italiano
Nederlands
Fran
çais Español
Português 

1
English
Please read this guide before operating this scanner. After you finish reading this guide, store it in
a safe place for future reference.
Package Contents
Scanner and Accessories
Documentation
• Quick Start Guide (this document)
• Additional Documents
CanoScan Setup Utility CD-ROM
• Software Programs
- ScanGear (scanner driver)
- CanoScan Toolbox
- ArcSoft PhotoStudio
- Presto! PageManager (Windows only)
- ScanSoft OmniPage SE (not supported for Windows 98 First Edition)
- Adobe RGB (1998)...

Installing the Software
2
Installing the Software
1Place the CanoScan Setup Utility CD-ROM in the 
drive.
If prompted, select your language and place of residence. 
CanoScan Setup Utility program starts.
• For Macintosh: Double-click the [Setup] icon. Enter the 
administrator ID and password on the authentication dialog 
box.
2Click [Easy Install] on the main menu.
3Click [Install] to start installation.
Carefully read the License Agreement, and then click [Yes] to 
proceed. All the software programs and...

Preparing the Scanner
3
English
Preparing the Scanner
Unlocking the Scanner
1Peel the seals off the scanner.
2Slide the lock switch on the bottom of the scanner toward the unlock mark ( ). 
Connecting the Scanner
1Connect the scanner to your computer with the supplied USB cable.
2Connect the supplied AC adapter to the scanner, and then plug in.
• Do not tilt the scanner more than 90 degrees from horizontal when releasing the lock.
• Handle the scanner with both hands. Be careful not to drop the scanner....

Try Scanning
4
Try Scanning 
This section explains the basic scanning procedures using the image editing program, ArcSoft PhotoStudio, 
and the scanner driver, ScanGear.
1Place a document on the document glass and 
close the document cover.
2Start ArcSoft PhotoStudio. 
For Windows: Select [start] - [(All) Programs] - 
[ArcSoft PhotoStudio 5.5], then click [PhotoStudio 5.5].
For Macintosh: Open [Applications] - [PhotoStudio] 
folders, then double-click the [PhotoStudio] icon.
3From the [File] menu, click...

Using the Scanner Buttons
5
English
Using the Scanner Buttons
Scanner buttons allow you to copy, scan, e-mail, and save scanned images in PDF format with a press of a 
button. Simply place your document on the scanner, and then press the scanner button for the required 
function. For more information, see the Scanning Guide.       
• Before using scanner buttons, make sure that all the software programs are installed on your computer using the [Easy 
Install] option of the CanoScan Setup Utility program....

Scanning Film
6
Scanning Film
This scanner can scan 35 mm film (film strip or slide). Follow the procedure below when scanning film.
1Remove the protective 
sheet from the 
document cover.
When you finish scanning, 
put the protective sheet back 
by aligning it with the 
grooves in the document 
cover and sliding it 
downward into place.
2Remove the Film Guide 
from the document 
cover.
Hold the document cover so 
that it doesnt close, then a
press down and hold the tab 
at the Film Guides top left 
and...

Scanning Film
7
English
4Insert the film into 
the Film Guide.
Place the film face 
down with the frames 
in reverse order.
5Set the Film Guide to the 
document cover, and 
close the document 
cover.
Hold the document cover and 
a insert the bottom edge of 
the Film Guide into the 
bottom groove in the 
document cover, and then b
tilt the top of the Film Guide 
up into the document cover 
until it locks securely into 
place with a click.
• Use a blower brush to remove any dust from the film, which will...

Scanning Film
8
6Start ArcSoft PhotoStudio, then start 
ScanGear.
Follow the steps 2 to 4 in Try Scanning on page 4.
7Select [Negative Film (Color)] or [Positive 
Film (Color)] in [Select Source] to match the 
type of film you are scanning, then click 
[Preview].
8Place a check mark beside the number(s) of 
the frame(s) you want to scan. Perform 
image corrections as needed.
9Click [Scan] to start scanning.
10 When prompted to close ScanGear, click [OK].
11 Save the scanned image in ArcSoft PhotoStudio...

Specifications
9
English
Specifications
*1 Optical Resolution represents the maximum sampling rate based on ISO 14473.*2 For film scanning only.*3 The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer time is not included. Scanning 
speed varies according to the document types, scan settings, or specifications of the computer.
*4 Calibration processing time is not included.*5 AC adapter type varies according to the region in which the scanner is purchased. 
Use only AC adapters listed in the...