Canon Projector WUX500 User Manual

71
Using Menus
Advanced Guide
Using Menus
Basic Menu Operations
1Press the MENU button to display the menu window.
2Press the [ ] / [ ] buttons to select a tab.
•If the tab position is not highlighted in orange, press the [ ] / [ ] buttons to 
move the current selection to the top.
3Press the [ ] / [ ] buttons to select an item.
4Select contents.
How to select the contents varies depending on the item.
Selecting from a list   Example: Aspect (P74)
Remote controlProjector
Remote controlProjector
Remote...

Using Menus
72
Adjusting with the [ ] / [ ] buttons   Example: Contrast (P82)
Selecting from a different screen (1)   Example: Menu position (P95)
Selecting from a different screen (2)   Example: Tracking (P75)
5Pressing the MENU button causes the menu screen to disappear.
The menu screen will also disappear if the EXIT button is pressed.
1. Select [Contrast].
2. Use the [ ] / [ ] buttons to adjust 
the setting.
1. Select [Menu position].
2. Press the OK button to display a 
different screen.
3. Then...

73
Advanced Guide
Menu Description
Menu Description
Input settings
This section describes settings for aspect ratio, resolution, and projection 
from a USB flash drive.
(When the input signal is Analog PC-1)
Menus that are not available are grayed out or hidden.
MenuFunctionDetails
Aspect Select an image aspect ratio. P74
Auto PC Automatically adjusts display position misalignment 
and screen flickering. P74
Input signal select Manually set a resolution to suit computer images. P74
Input signal settings...

Menu Description
74
Aspect
> [Input settings] > [Aspect] 
Select a projection aspect ratio for images.
Menus that are not available are hidden.
Auto PC
> [Input settings] > [Auto PC] 
Automatically adjusts display position misalignment and screen flickering.
Input signal select
> [Input settings] > [Input signal select]  
Select a suitable resolution if Auto PC (P55) does not project computer images 
correctly.
Select the input signal that matches the computer resolution. Press the OK button 
to confirm...

75
Menu Description
Advanced Guide
Menu Description
Input signal settings
> [Input settings] > [Input signal settings] 
Complete input signal settings. Use the [ ] / [ ] buttons to adjust the levels as 
needed.
SubmenuFunction
To t a l  d o t sAdjust the total number of horizontal dots. Adjust it when stripes 
are displayed on the screen.
TrackingFine-tune the timing of image generation from signals. Adjusts the 
tracking when the image distorts or flickers.
Horizontal positionAdjust the horizontal image...

Menu Description
76
PC-free multi projection 
> [Input settings] > [PC-free multi projection] 
Specify settings when projecting images on a USB flash drive to multiple networked 
projectors. For instructions, see “Using PC-Free Multi Projection” (P153).
Mode setting
Specify the mode for PC-free multi projection: Master*1 or Slave*2 mode.
*1Connect a USB flash drive and stream images for projection to Slave 
projectors.
*2Project images streamed from the Master projector.
OptionFunction
Off Disable...

77
Menu Description
Advanced Guide
Menu Description
Split screen
> [Input settings] > [Split screen]  
Two input images from devices connected to the projector can be projected side by 
side.
For details on split-screen mode, see “Split-Screen Display” (P156).
Slideshow interval
Specify the interval after which slideshow images are switched. Enter the time in a range of 5 
seconds to 10 minutes, in the format min.:sec.
This setting is available when the mode is set to [Master].
Animation effect
Specify...

Menu Description
78
Input level
> [Input settings] > [Input level] 
Adjust the input level for content projected via HDMI or HDBaseT.
Color space
> [Input settings] > [Color space] 
Select the color space for HDMI or HDBaseT signals.
Over scan
> [Input settings] > [Over scan] 
Select this setting to trim peripheral distortion from content projected via HDMI or 
HDBaseT.
OptionFunction
Auto Automatically switches the input level based on the input signal.
Normal Limits the input level to 16 - 235....

79
Menu Description
Advanced Guide
Menu Description
Progressive
> [Input settings] > [Progressive] 
Performs progressive processing optimized for still images in cinematic content or 
moving images in videos.
Slideshow interval
> [Input settings] > [Slideshow interval] 
You can project images on a USB flash drive automatically, one after another.
Use the [ ] / [ ] buttons to set the interval after which images are switched in a 
range of 1 seconds to 60 minutes, in the format min.:sec.
Animation effect
>...

Menu Description
80
Image adjustment
This section describes image quality settings such as brightness, contrast, 
and sharpness.
(When the input signal is Analog PC-1)
Menus that are not available are grayed out or hidden.
* Adjustments are stored as modified settings for the current input signal and image 
mode.
MenuFunctionDetails
Image mode * Select overall image quality to suit the projected image.P81
Create profile Save desired image quality settings as profiles.P81
Baseline image mode Shows the...