Canon Projector WUX500 User Manual
Here you can view all the pages of manual Canon Projector WUX500 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
Projection Procedure
61
Basic Guide
Projection Procedure
Selecting an Aspect Ratio
Press the ASPECT button on the remote control and select an appropriate aspect
ratio. Press the ASPECT button to change the aspect ratio type. For more details
about aspect ratios, refer to “Relationship between Aspect and Screen Aspect” on
page 172.
You can also select any aspect ratio from [Aspect] in the menu. (P74)
Some aspect ratios may not appear depending on the type of input signal.
Example:Remote control...](http://img.usermanuals.tech/thumb/14/100457/w300_projector_manual_9292_d-60.png "Page 61
Projection Procedure
61
Basic Guide
Projection Procedure
Selecting an Aspect Ratio
Press the ASPECT button on the remote control and select an appropriate aspect
ratio. Press the ASPECT button to change the aspect ratio type. For more details
about aspect ratios, refer to “Relationship between Aspect and Screen Aspect” on
page 172.
You can also select any aspect ratio from [Aspect] in the menu. (P74)
Some aspect ratios may not appear depending on the type of input signal.
Example:Remote control...")
Projection Procedure 61 Basic Guide Projection Procedure Selecting an Aspect Ratio Press the ASPECT button on the remote control and select an appropriate aspect ratio. Press the ASPECT button to change the aspect ratio type. For more details about aspect ratios, refer to “Relationship between Aspect and Screen Aspect” on page 172. You can also select any aspect ratio from [Aspect] in the menu. (P74) Some aspect ratios may not appear depending on the type of input signal. Example:Remote control...
Page 62
62 Projection Procedure Step 5 Adjusting Keystone Distortion To correct keystone distortion, press the KEYSTONE button. Two types of correction are available: horizontal/vertical correction and corner correction. Use horizontal/vertical keystone correction to adjust image width or height distortion separately, and use corner correction to adjust the position of each corner of the image. For instructions on switching keystone correction, refer to “Keystone” (P89). ■Horizontal/Vertical Keystone...
Page 63
![Page 63
Projection Procedure
63
Basic Guide
Projection Procedure
2Press the pointer buttons to adjust the dimensions.
3When keystone distortion has been corrected, press the OK button.
■Corner Adjustment
1Press the KEYSTONE button on the remote control or projector to display
the corner adjustment window.
To correct top distortion,
press the [ ] button.To correct bottom distortion,
press the [ ] button.
To correct distortion on the
right, press the [ ] button.
Screen
To correct distortion on the left,
press...](http://img.usermanuals.tech/thumb/14/100457/w300_projector_manual_9292_d-62.png "Page 63
Projection Procedure
63
Basic Guide
Projection Procedure
2Press the pointer buttons to adjust the dimensions.
3When keystone distortion has been corrected, press the OK button.
■Corner Adjustment
1Press the KEYSTONE button on the remote control or projector to display
the corner adjustment window.
To correct top distortion,
press the [ ] button.To correct bottom distortion,
press the [ ] button.
To correct distortion on the
right, press the [ ] button.
Screen
To correct distortion on the left,
press...")
Projection Procedure 63 Basic Guide Projection Procedure 2Press the pointer buttons to adjust the dimensions. 3When keystone distortion has been corrected, press the OK button. ■Corner Adjustment 1Press the KEYSTONE button on the remote control or projector to display the corner adjustment window. To correct top distortion, press the [ ] button.To correct bottom distortion, press the [ ] button. To correct distortion on the right, press the [ ] button. Screen To correct distortion on the left, press...
Page 64
![Page 64
64
Projection Procedure
2Press the pointer button of the corner for correction, and then press the
OK button.
3Press the pointer buttons to adjust the corner.
4When you have finished correcting, press the OK button.
■Resetting the Keystone Adjustment
Horizontal-vertical keystone and corner adjustment can be reset as follows.
First, press the KEYSTONE button on the remote control twice to display the
[Keystone reset] window.
Next, select [OK] with the [ ] button, and then press the OK button.
Your...](http://img.usermanuals.tech/thumb/14/100457/w300_projector_manual_9292_d-63.png "Page 64
64
Projection Procedure
2Press the pointer button of the corner for correction, and then press the
OK button.
3Press the pointer buttons to adjust the corner.
4When you have finished correcting, press the OK button.
■Resetting the Keystone Adjustment
Horizontal-vertical keystone and corner adjustment can be reset as follows.
First, press the KEYSTONE button on the remote control twice to display the
[Keystone reset] window.
Next, select [OK] with the [ ] button, and then press the OK button.
Your...")
64 Projection Procedure 2Press the pointer button of the corner for correction, and then press the OK button. 3Press the pointer buttons to adjust the corner. 4When you have finished correcting, press the OK button. ■Resetting the Keystone Adjustment Horizontal-vertical keystone and corner adjustment can be reset as follows. First, press the KEYSTONE button on the remote control twice to display the [Keystone reset] window. Next, select [OK] with the [ ] button, and then press the OK button. Your...
Page 65
![Page 65
Projection Procedure
65
Basic Guide
Projection Procedure
Step 6 Select the Image Quality (Image Mode)
You can select an image mode to suit the projected image.
In each image mode, you can further adjust the brightness, contrast, sharpness,
gamma, color adjustment, advanced adjustment, and lamp mode. (P81)
Image Modes
Available image modes vary depending on the selected input signal and whether
[HDMI image input] (P102) and [HDBaseT image input] (P102) is set to [Auto] or
[Computer].
: Compatible :...](http://img.usermanuals.tech/thumb/14/100457/w300_projector_manual_9292_d-64.png "Page 65
Projection Procedure
65
Basic Guide
Projection Procedure
Step 6 Select the Image Quality (Image Mode)
You can select an image mode to suit the projected image.
In each image mode, you can further adjust the brightness, contrast, sharpness,
gamma, color adjustment, advanced adjustment, and lamp mode. (P81)
Image Modes
Available image modes vary depending on the selected input signal and whether
[HDMI image input] (P102) and [HDBaseT image input] (P102) is set to [Auto] or
[Computer].
: Compatible :...")
Projection Procedure 65 Basic Guide Projection Procedure Step 6 Select the Image Quality (Image Mode) You can select an image mode to suit the projected image. In each image mode, you can further adjust the brightness, contrast, sharpness, gamma, color adjustment, advanced adjustment, and lamp mode. (P81) Image Modes Available image modes vary depending on the selected input signal and whether [HDMI image input] (P102) and [HDBaseT image input] (P102) is set to [Auto] or [Computer]. : Compatible :...
Page 66
![Page 66
66
Projection Procedure
■Selecting an Image Mode
Press the IMAGE button on the remote control to select.
The image mode changes each time the IMAGE button is pressed. (The displayed
image modes vary depending on the selected input signal.)
You can also select any image mode from the [Image mode] menu. (P81)
•User settings 1 - 5 are displayed when the desired image settings have been
created and stored using the user memory function in the image adjustment
menu. (P81)
Step 7 Turn the Projector Off...](http://img.usermanuals.tech/thumb/14/100457/w300_projector_manual_9292_d-65.png "Page 66
66
Projection Procedure
■Selecting an Image Mode
Press the IMAGE button on the remote control to select.
The image mode changes each time the IMAGE button is pressed. (The displayed
image modes vary depending on the selected input signal.)
You can also select any image mode from the [Image mode] menu. (P81)
•User settings 1 - 5 are displayed when the desired image settings have been
created and stored using the user memory function in the image adjustment
menu. (P81)
Step 7 Turn the Projector Off...")
66 Projection Procedure ■Selecting an Image Mode Press the IMAGE button on the remote control to select. The image mode changes each time the IMAGE button is pressed. (The displayed image modes vary depending on the selected input signal.) You can also select any image mode from the [Image mode] menu. (P81) •User settings 1 - 5 are displayed when the desired image settings have been created and stored using the user memory function in the image adjustment menu. (P81) Step 7 Turn the Projector Off...
Page 67
67 Basic Guide Convenient Features Convenient Features This section describes features convenient during presentations and in other situations. Temporarily Blacking Out an Image Projection can be temporarily blanked after a presentation, or to divert the audience’s attention away from the screen. Press the BLANK button to black out the image. Press the BLANK button again to show the image. • You can set the screen state while blacking out the image in the menu. (P98) • The lamp remains illuminated...
Page 68
68 Convenient Features Projecting a Test Pattern from the Menu Even without any input signals, the projector can project a test pattern. Test patterns can be projected during installation to check how the projector is installed. For details on projecting test patterns, see “Test pattern” (P96) or “Displayed Test Patterns” (P176). Set Power-Saving Settings Set power-saving settings as needed. The following four settings are available. For details, refer to the page describing each function. • Lamp mode...
Page 69
69 Safety Instructions Before Use Basic Guide Installation Procedure Connection Procedure Projection Procedure Convenient Features Advanced GuideUsing Menus Menu Description Advanced Projection Other InformationMaintenance Product Specifications Troubleshooting Advanced Guide
Page 70
![Page 70
70
Using Menus
Use the menus to set the operation of the projector in detail.
Menu Configuration
The menu screen is divided into 6 tabs as shown below.
[System settings] tab (P97)
You can set the operation of the projector.
[Image adjustment] tab (P80)
You can adjust the image quality and colors
according to your preference.
[Network settings] tab (P116)
These settings are for when using the projector
from a PC via a network.
For the network settings, refer to “Network
settings” (P110).
[Information]...](http://img.usermanuals.tech/thumb/14/100457/w300_projector_manual_9292_d-69.png "Page 70
70
Using Menus
Use the menus to set the operation of the projector in detail.
Menu Configuration
The menu screen is divided into 6 tabs as shown below.
[System settings] tab (P97)
You can set the operation of the projector.
[Image adjustment] tab (P80)
You can adjust the image quality and colors
according to your preference.
[Network settings] tab (P116)
These settings are for when using the projector
from a PC via a network.
For the network settings, refer to “Network
settings” (P110).
[Information]...")
70 Using Menus Use the menus to set the operation of the projector in detail. Menu Configuration The menu screen is divided into 6 tabs as shown below. [System settings] tab (P97) You can set the operation of the projector. [Image adjustment] tab (P80) You can adjust the image quality and colors according to your preference. [Network settings] tab (P116) These settings are for when using the projector from a PC via a network. For the network settings, refer to “Network settings” (P110). [Information]...