Canon Projector WUX500 User Manual

121
Menu Description
Advanced Guide
Menu Description
Detailed settings (wireless)
> [Network settings] > [Detailed settings (wireless)] 
Display and manually change the wireless IP address, gateway address, and other 
settings. Available only when wireless networking is [On].
MenuFunction
Mode Shows the wireless connection mode. (P111, P112)
SSID Shows the access point SSID.
Security Shows the security setting.
Channel Shows the channel used for the connection.
Signal strength Shows actual signal...

Menu Description
122
Manual settingsManually specify the projector’s wireless settings.
MenuFunction
SubmenuFunction
Mode Shows the wireless connection mode. (P111, P112)
SSIDA list of available access point SSIDs is displayed. 
You can find available access points nearby and 
change the name of the connection.
SecuritySelect the wireless security from [Open], [WEP], 
[WPA2 AES], or [WPA/WPA2 TKIP/AES]. In PJ AP 
mode, choose from [Open] or [WPA2 AES].
Channel Shows the current wireless channel (1 -...

123
Menu Description
Advanced Guide
Menu Description
DHCPEnable or disable wireless DHCP on the projector.
TCP/IP settingsConfigure the projector’s wireless TCP/IP settings.
•Cannot be configured when [DHCP] (P123) is [On].
•If an invalid value is entered, the message “Invalid entry” appears. If 
this occurs, enter a valid value.
Network setting 
initializationThe following network settings are initialized.
Settings configured from the projector menu
•Network settings lock (P117)
•Network password...

Menu Description
124
PJLink
> [Network settings] > [PJLink]  
You can enable or disable the PJLink network function of the projector.
When the function is turned on, control is possible via the LAN using commands 
that meet PJLink standards.
OptionFunction
Off Disables the PJLink function.
On Enables the PJLink function.
• The projector conforms to Class 1 as defined in PJLink standards established by the 
Japan Business Machine and Information System Industries Association (JBMIA). This 
projector...

125
Menu Description
Advanced Guide
Menu Description
AMX Device Discovery
> [Network settings] > [AMX Device Discovery] 
In a network environment, AMX Device Discovery can be used to enable other 
equipment to discover the projector. For networks without AMX Device Discovery, 
select [Off].
Crestron RoomView
> [Network settings] > [Crestron RoomView] 
Crestron RoomView enables centralized management of multiple projectors over a 
network. Networked projectors can be remotely controlled to troubleshoot...

Menu Description
126
Completing Computer Settings
Specifying an IP Address
Instructions for setting a computer’s wired or wireless IP address are as follows for 
each operating system.
■Windows 8.1 / Windows 8
1Right-click on the start screen background and click [All Apps] in the 
lower right.
•Windows 8.1 Users:
Click the down arrow in the lower left of the start screen.
2Click [Control Panel].
•From the Desktop:
Press Win+X.
In the shortcut menu displayed in the lower left, click [Control Panel]....

127
Menu Description
Advanced Guide
Menu Description
■Windows 7
1From the PC [Start] menu, select [Control Panel].
2Click on [Network and Internet], then click on [View network status and 
tasks].
3From the menu on the left side of the window, click on [Change adapter 
settings].
4For a wired connection, right-click [Local Area Connection], or for a 
wireless connection, right-click [Wireless Network Connection]. Next, 
click [Properties].
5Select [Internet Protocol Version 4 (TCP/IPv4)] and click the...

Menu Description
128
■Mac OS X
1Open the Apple Menu and select [System Preferences].
2In the System Preferences window, click [Network] to display the Network 
window.
3For a wired connection, select [Built-in Ethernet], or for a wireless 
connection, select [Wi-Fi]. Next, click the [TCP/IP] tab. Make a note of the 
original network settings (IP address, subnet mask, router, DNS server, 
and so on).
4Create a new network environment and set the IP address and subnet 
mask.
The projector’s own default IP...

129
Menu Description
Advanced Guide
Menu Description
The following information is displayed.
* For details on downloading the Networked Multi-Projection (NMPJ) application, 
refer to the NMPJ user’s manual.
3Click [Settings] on the web screen.
The password input window appears.
Network Multiple Projection 
DownloadFor downloading the Networked Multi-Projection 
(NMPJ) program.*
Projector control Displays the projector control screen.
Settings Shows the settings screen.
Projector name The name of the...

Menu Description
130
4Enter the user name and password on the password input window, then 
click [OK].
The factory default user name is “root” and the password is “system”.
The settings screen is displayed. Complete the network settings on this screen.
■Network Setting
1Select a function to set up from the settings screen menu.
To control the projector from the computer, click [Projector control]. (P144)