Home > Canon > Projector > Canon Projector WUX500 User Manual

Canon Projector WUX500 User Manual

Here you can view all the pages of manual Canon Projector WUX500 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 171

171
Maintenance
Other Information
Maintenance
■If the Lamp Cover Comes Off
Align the point of attachment on the lamp cover with the groove on the projector 
and gently push the lamp cover to attach it.
• We recommend cleaning or replacing the air filter (part no.: RS-FL02) when you 
replace the lamp.
• To order air filters, contact the Canon Customer Support Center. 

Page 172

172
Product Specifications
Relationship between Aspect and Screen 
Aspect
This section describes the relationship between screen aspect (P58) and aspect 
(P60).
Select an optimum aspect ratio of the projected image (screen aspect) or an 
optimum screen mode (aspect) according to the aspect ratio of the screen, type of 
input image signal and so on for the projection to make best use of the screen size.
•If a computer image with an aspect ratio of 16:9 is not projected correctly when 
the setting is...

Page 173

173
Product Specifications
Other Information
Product Specifications
■When projecting at the original aspect ratio on a 16:9 
screen
■When projecting at the original aspect ratio on a 4:3 
screen
Original Aspect 
RatioScreen aspect 
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[16:9]
[16:9 
D. image shift][Auto]
(16:9)
1920 x 1080
1280 x 720[16:9]
[Auto]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[4:3]
[Auto]
Original Aspect 
RatioScreen aspect 
setting (P58)Aspect...

Page 174

Product Specifications
174
■When projecting to fill a 16:10 screen
■When projecting to fill a 16:9 screen
Original Aspect 
RatioScreen aspect 
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[16:10][16:10]
[Auto]
(16:9)
1920 x 1080
1280 x 720[16:10]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[16:10]
Original Aspect 
RatioScreen aspect 
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[16:9]
[16:9 
D. image shift][16:9]
(16:9)...

Page 175

175
Product Specifications
Other Information
Product Specifications
■When projecting to fill a 4:3 screen
Original Aspect 
RatioScreen aspect 
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[4:3]
[4:3 
D. image shift][4:3]
(16:9)
1920 x 1080
1280 x 720[4:3]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[4:3]
[Auto] 

Page 176

Product Specifications
176
Displayed Test Patterns
To access the test pattern menu, from the [Install settings] menu, select [Test 
pattern] > [On] (P96).
While the test pattern is displayed, you can use the [ ] / [ ] buttons to switch 
patterns. Also, if there is an option pattern available, you can use the [ ] / [ ] 
buttons to switch pattern. A dialog box is shown during test pattern display that 
identifies the current test pattern and provides operating instructions.
The following test patterns can...

Page 177

177
Product Specifications
Other Information
Product Specifications
Supported Signal Types
This projector supports the following signal types.
If your computer or AV equipment is compatible with any one of these signal types, 
the projector’s Auto PC function selects the input signal type to project an image 
appropriately.
Analog PC
Digital PC
Resolution (dots)  Signal typeHorizontal frequency 
(kHz)Vertical frequency (Hz)
640 x 480 VGA 31.469 59.940
720 x 480 – 31.469 59.940
720 x 576 – 31.250 50.000...

Page 178

Product Specifications
178
HDMI/HDBaseT
Connecting to a computer
Connecting with AV equipment
Component
* The specifications in the table above are subject to change without notice.
* This projector does not support any computer output signal with a dot clock of higher than 162 MHz.
* Use a computer cable in which all pins are connected. If the cable is a type in which all pins are not 
connected, the image may not be correctly displayed.1080PsF
(1920 x 1080i)–27.000 24.000
28.125 25.000
33.750 30.000...

Page 179

179
Product Specifications
Other Information
Product Specifications
■Projector
Model name WUX500 WUX450ST
Display system RGB liquid crystal system: reflective (LCOS) : 3 panels
Optical systemColor separation by dichroic mirror / polarizing beam splitter 
and color composition by prism
Display device
Type / No. of panels Reflective liquid crystal panel (LCOS) / 3 panels
Size / Aspect ratio 0.71 / 16:10
Drive system Active matrix system
Number dots / Total 
number dots2,304,000 (1920 x 1200) x 3 panels /...

Page 180

Product Specifications
180
Input terminal
DVI-I terminal (29-pin DVI 
connector)Analog PC, Digital PC
HDMI terminal HDMI (deep color only)
ANALOG PC / 
COMPONENT terminal 
(mini D-sub 15-pin)Analog PC, Component
HDBaseT terminal (RJ-45) Networked multi-projection, HDBaseT
LAN terminal (RJ-45) Networked multi-projection
USB Port (USB Mass 
Storage Class)JPEG images
CONTROL terminal 
(RS-232C (D-sub 9-pin))User commands
REMOTE terminal 
(3.5ø stereo mini jack)Wired remote control
AUDIO IN terminal 
(3.5ø...
Start reading Canon Projector WUX500 User Manual

Related Manuals for Canon Projector WUX500 User Manual

All Canon manuals