Canon Projector WUX500 User Manual
Have a look at the manual Canon Projector WUX500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 166
Maintenance
166
Replacing the Air Filter
Follow the procedure below when replacing the air filter.
1Turn off the projector power and
remove the power plug.
2As you press the top and bottom
of the air filter cover to release
the lock, remove the cover.
3Open the filter cover and remove
it.
Do not rinse the air filter in water. This may damage the air filter and projector.
• If the air filter cleaning screen is displayed when turning on the projector after cleaning
the air filter, select [Yes] and...](http://img.usermanuals.tech/thumb/14/100457/w64_projector_manual_9292_d-165.png "Page 166
Maintenance
166
Replacing the Air Filter
Follow the procedure below when replacing the air filter.
1Turn off the projector power and
remove the power plug.
2As you press the top and bottom
of the air filter cover to release
the lock, remove the cover.
3Open the filter cover and remove
it.
Do not rinse the air filter in water. This may damage the air filter and projector.
• If the air filter cleaning screen is displayed when turning on the projector after cleaning
the air filter, select [Yes] and...")
![Page 167
167
Maintenance
Other Information
Maintenance
4Remove the air filter.
5Follow this procedure in reverse
to install a new air filter.
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following
message (two types) is displayed for 10 seconds every time the projector is turned
on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
•Only the [ ], [ ], OK and POWER buttons are available while this screen is
displayed.
• When...](http://img.usermanuals.tech/thumb/14/100457/w64_projector_manual_9292_d-166.png "Page 167
167
Maintenance
Other Information
Maintenance
4Remove the air filter.
5Follow this procedure in reverse
to install a new air filter.
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following
message (two types) is displayed for 10 seconds every time the projector is turned
on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
•Only the [ ], [ ], OK and POWER buttons are available while this screen is
displayed.
• When...")
![Page 168
Maintenance
168
3,000 hours or more
If a lamp replacement message is displayed, refer to “Lamp Replacement
Procedure” (P169).
•Only the POWER button is available while this screen is displayed.
•When you press the POWER button, the “Push POWER button again to turn off
power.” message appears.
•When this screen has disappeared after being displayed for 10 seconds, all
buttons become operable.
•You can check the usage time of the lamp in [Lamp counter] in the [System
settings] menu. (P106)
•This screen...](http://img.usermanuals.tech/thumb/14/100457/w64_projector_manual_9292_d-167.png "Page 168
Maintenance
168
3,000 hours or more
If a lamp replacement message is displayed, refer to “Lamp Replacement
Procedure” (P169).
•Only the POWER button is available while this screen is displayed.
•When you press the POWER button, the “Push POWER button again to turn off
power.” message appears.
•When this screen has disappeared after being displayed for 10 seconds, all
buttons become operable.
•You can check the usage time of the lamp in [Lamp counter] in the [System
settings] menu. (P106)
•This screen...")
![Page 170
Maintenance
170
4Loosen the three screws securing the lamp unit.
5Remove the lamp unit.
6Follow this procedure in reverse to install a new lamp unit.
7Turn on the power. Bring up the menu and select [System settings] >
[Other settings] > [Lamp counter].
8Select [Reset] - [Yes] to reset the lamp counter.](http://img.usermanuals.tech/thumb/14/100457/w64_projector_manual_9292_d-169.png "Page 170
Maintenance
170
4Loosen the three screws securing the lamp unit.
5Remove the lamp unit.
6Follow this procedure in reverse to install a new lamp unit.
7Turn on the power. Bring up the menu and select [System settings] >
[Other settings] > [Lamp counter].
8Select [Reset] - [Yes] to reset the lamp counter.")
![Page 173
173
Product Specifications
Other Information
Product Specifications
■When projecting at the original aspect ratio on a 16:9
screen
■When projecting at the original aspect ratio on a 4:3
screen
Original Aspect
RatioScreen aspect
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[16:9]
[16:9
D. image shift][Auto]
(16:9)
1920 x 1080
1280 x 720[16:9]
[Auto]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[4:3]
[Auto]
Original Aspect
RatioScreen aspect
setting (P58)Aspect...](http://img.usermanuals.tech/thumb/14/100457/w64_projector_manual_9292_d-172.png "Page 173
173
Product Specifications
Other Information
Product Specifications
■When projecting at the original aspect ratio on a 16:9
screen
■When projecting at the original aspect ratio on a 4:3
screen
Original Aspect
RatioScreen aspect
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[16:9]
[16:9
D. image shift][Auto]
(16:9)
1920 x 1080
1280 x 720[16:9]
[Auto]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[4:3]
[Auto]
Original Aspect
RatioScreen aspect
setting (P58)Aspect...")
![Page 174
Product Specifications
174
■When projecting to fill a 16:10 screen
■When projecting to fill a 16:9 screen
Original Aspect
RatioScreen aspect
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[16:10][16:10]
[Auto]
(16:9)
1920 x 1080
1280 x 720[16:10]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[16:10]
Original Aspect
RatioScreen aspect
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[16:9]
[16:9
D. image shift][16:9]
(16:9)...](http://img.usermanuals.tech/thumb/14/100457/w64_projector_manual_9292_d-173.png "Page 174
Product Specifications
174
■When projecting to fill a 16:10 screen
■When projecting to fill a 16:9 screen
Original Aspect
RatioScreen aspect
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[16:10][16:10]
[Auto]
(16:9)
1920 x 1080
1280 x 720[16:10]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[16:10]
Original Aspect
RatioScreen aspect
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[16:9]
[16:9
D. image shift][16:9]
(16:9)...")
![Page 175
175
Product Specifications
Other Information
Product Specifications
■When projecting to fill a 4:3 screen
Original Aspect
RatioScreen aspect
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[4:3]
[4:3
D. image shift][4:3]
(16:9)
1920 x 1080
1280 x 720[4:3]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[4:3]
[Auto]](http://img.usermanuals.tech/thumb/14/100457/w64_projector_manual_9292_d-174.png "Page 175
175
Product Specifications
Other Information
Product Specifications
■When projecting to fill a 4:3 screen
Original Aspect
RatioScreen aspect
setting (P58)Aspect setting (P60) Screen image
(16:10)
1920 x 1200
1440 x 900
1280 x 800
[4:3]
[4:3
D. image shift][4:3]
(16:9)
1920 x 1080
1280 x 720[4:3]
(4:3)
1600 x 1200
1400 x 1050
640 x 480[4:3]
[Auto]")
![Page 176
Product Specifications
176
Displayed Test Patterns
To access the test pattern menu, from the [Install settings] menu, select [Test
pattern] > [On] (P96).
While the test pattern is displayed, you can use the [ ] / [ ] buttons to switch
patterns. Also, if there is an option pattern available, you can use the [ ] / [ ]
buttons to switch pattern. A dialog box is shown during test pattern display that
identifies the current test pattern and provides operating instructions.
The following test patterns can...](http://img.usermanuals.tech/thumb/14/100457/w64_projector_manual_9292_d-175.png "Page 176
Product Specifications
176
Displayed Test Patterns
To access the test pattern menu, from the [Install settings] menu, select [Test
pattern] > [On] (P96).
While the test pattern is displayed, you can use the [ ] / [ ] buttons to switch
patterns. Also, if there is an option pattern available, you can use the [ ] / [ ]
buttons to switch pattern. A dialog box is shown during test pattern display that
identifies the current test pattern and provides operating instructions.
The following test patterns can...")
171 Maintenance Other Information Maintenance ■If the Lamp Cover Comes Off Align the point of attachment on the lamp cover with the groove on the projector and gently push the lamp cover to attach it. • We recommend cleaning or replacing the air filter (part no.: RS-FL02) when you replace the lamp. • To order air filters, contact the Canon Customer Support Center.
172 Product Specifications Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect (P58) and aspect (P60). Select an optimum aspect ratio of the projected image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to make best use of the screen size. •If a computer image with an aspect ratio of 16:9 is not projected correctly when the setting is [Auto], select [16:9] as the screen aspect. •For a 16:9 image with black borders at the top and bottom, such as a terrestrial broadcast movie, you can project the 16:9 image area so that it is projected on the entire screen by selecting [Zoom] in [Aspect]. There may be some cases that [Zoom] cannot be selected depending on the input signal and/or resolution. •For keystone correction (P62), select an option other than [4:3 D. image shift] or [16:9 D. image shift] for Screen aspect. ■When projecting at the original aspect ratio on a 16:10 screen Original Aspect RatioScreen aspect setting (P58)Aspect setting (P60) Screen image (16:10) 1920 x 1200 1440 x 900 1280 x 800 [16:10][16:10] [Auto] (16:9) 1920 x 1080 1280 x 720[16:9] [Auto] (4:3) 1600 x 1200 1400 x 1050 640 x 480[4:3] [Auto]
173 Product Specifications Other Information Product Specifications ■When projecting at the original aspect ratio on a 16:9 screen ■When projecting at the original aspect ratio on a 4:3 screen Original Aspect RatioScreen aspect setting (P58)Aspect setting (P60) Screen image (16:10) 1920 x 1200 1440 x 900 1280 x 800 [16:9] [16:9 D. image shift][Auto] (16:9) 1920 x 1080 1280 x 720[16:9] [Auto] (4:3) 1600 x 1200 1400 x 1050 640 x 480[4:3] [Auto] Original Aspect RatioScreen aspect setting (P58)Aspect setting (P60) Screen image (16:10) 1920 x 1200 1440 x 900 1280 x 800 [4:3] [4:3 D. image shift][Auto] (16:9) 1920 x 1080 1280 x 720[16:9] [Auto] (4:3) 1600 x 1200 1400 x 1050 640 x 480[4:3] [Auto]
Product Specifications 174 ■When projecting to fill a 16:10 screen ■When projecting to fill a 16:9 screen Original Aspect RatioScreen aspect setting (P58)Aspect setting (P60) Screen image (16:10) 1920 x 1200 1440 x 900 1280 x 800 [16:10][16:10] [Auto] (16:9) 1920 x 1080 1280 x 720[16:10] (4:3) 1600 x 1200 1400 x 1050 640 x 480[16:10] Original Aspect RatioScreen aspect setting (P58)Aspect setting (P60) Screen image (16:10) 1920 x 1200 1440 x 900 1280 x 800 [16:9] [16:9 D. image shift][16:9] (16:9) 1920 x 1080 1280 x 720[16:9] [Auto] (4:3) 1600 x 1200 1400 x 1050 640 x 480[16:9]
175 Product Specifications Other Information Product Specifications ■When projecting to fill a 4:3 screen Original Aspect RatioScreen aspect setting (P58)Aspect setting (P60) Screen image (16:10) 1920 x 1200 1440 x 900 1280 x 800 [4:3] [4:3 D. image shift][4:3] (16:9) 1920 x 1080 1280 x 720[4:3] (4:3) 1600 x 1200 1400 x 1050 640 x 480[4:3] [Auto]
Product Specifications 176 Displayed Test Patterns To access the test pattern menu, from the [Install settings] menu, select [Test pattern] > [On] (P96). While the test pattern is displayed, you can use the [ ] / [ ] buttons to switch patterns. Also, if there is an option pattern available, you can use the [ ] / [ ] buttons to switch pattern. A dialog box is shown during test pattern display that identifies the current test pattern and provides operating instructions. The following test patterns can be displayed. Use [ ] / [ ] to switch patternsUse [ ] / [ ] to switch option patterns Raster 100% (White / red / green / blue) Raster 50% (White / red / green / blue) Color bars (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) Stairstep H Stairstep V Cross Hatch Border FocusMulti Checker Color steps Character
177 Product Specifications Other Information Product Specifications Supported Signal Types This projector supports the following signal types. If your computer or AV equipment is compatible with any one of these signal types, the projector’s Auto PC function selects the input signal type to project an image appropriately. Analog PC Digital PC Resolution (dots) Signal typeHorizontal frequency (kHz)Vertical frequency (Hz) 640 x 480 VGA 31.469 59.940 720 x 480 – 31.469 59.940 720 x 576 – 31.250 50.000 800 x 600 SVGA 37.879 60.317 848 x 480 – 31.020 60.000 1024 x 768 XGA 48.363 60.004 1280 x 768 WXGA47.776 59.870 47.396 59.995 1280 x 80049.702 59.810 49.306 59.910 1280 x 960 – 60.000 60.000 1280 x 1024 SXGA 63.981 60.020 1366 x 768 – 47.712 59.790 1400 x 1050 SXGA+64.744 59.948 65.317 59.978 1440 x 900 WXGA+55.935 59.887 55.469 59.901 1600 x 900 – 60.000 60.000 1600 x 1200 UXGA 75.000 60.000 1680 x 1050 WSXGA+64.674 59.883 65.290 59.954 1920 x 1080 –56.250 50.000 67.500 60.000 1920 x 1200 WUXGA 74.038 59.950 Resolution (dots) Signal typeHorizontal frequency (kHz)Vertical frequency (Hz) 640 x 480 D-VGA 31.469 59.940 720 x 480 – 31.469 59.940 720 x 576 – 31.250 50.000 800 x 600 D-SVGA 37.879 60.317 1024 x 768 D-XGA 48.363 60.004 1280 x 720 –37.500 50.000 45.000 60.000 1280 x 800 D-WXGA49.702 59.810 49.306 59.910 1280 x 1024 D-SXGA 63.981 60.020 1366 x 768 – 47.712 59.790 1400 x 1050 D-SXGA+64.744 59.948 65.317 59.978 1440 x 900 D-WXGA+55.935 59.887 55.469 59.901 1600 x 900 – 60.000 60.000 1600 x 1200 D-UXGA 75.000 60.000 1680 x 1050 D-WSXGA+64.674 59.883 65.290 59.954 1920 x 1080 –27.000 24.000 56.250 50.000 67.500 60.000
Product Specifications 178 HDMI/HDBaseT Connecting to a computer Connecting with AV equipment Component * The specifications in the table above are subject to change without notice. * This projector does not support any computer output signal with a dot clock of higher than 162 MHz. * Use a computer cable in which all pins are connected. If the cable is a type in which all pins are not connected, the image may not be correctly displayed.1080PsF (1920 x 1080i)–27.000 24.000 28.125 25.000 33.750 30.000 1920 x 1200 D-WUXGA 74.038 59.950 Resolution (dots) Signal typeHorizontal frequency (kHz)Vertical frequency (Hz) 640 x 480 VGA 31.469 59.940 800 x 600 SVGA 37.879 60.317 1024 x 768 XGA 48.363 60.004 1280 x 800 WXGA49.702 59.810 49.306 59.910 1280 x 1024 SXGA 63.981 60.020 1366 x 768 – 47.712 59.790 1400 x 1050 SXGA+64.744 59.948 65.317 59.978 1440 x 900 WXGA+55.935 59.887 55.469 59.901 1600 x 900 – 60.000 60.000 1600 x 1200 UXGA 75.000 60.000 1680 x 1050 WSXGA+64.674 59.883 65.290 59.954 1920 x 1200 WUXGA 74.038 59.950 Signal type Horizontal frequency (kHz) Vertical frequency (Hz) 480p 31.469 59.940 576p 31.250 50.000 720p37.500 50.000 45.000 60.000 1080i28.125 50.000 33.750 60.000 1080p27.000 24.000 56.250 50.000 67.500 60.000 Signal type Horizontal frequency (kHz) Vertical frequency (Hz) 480i 15.734 59.940 480p 31.469 59.940 576i 15.625 50.000 576p 31.250 50.000 720p37.500 50.000 45.000 60.000 1080i28.125 50.000 33.750 60.000 1080p56.250 50.000 67.500 60.000 1080PsF27.000 24.000 28.125 25.000 33.750 30.000 Resolution (dots) Signal typeHorizontal frequency (kHz)Vertical frequency (Hz)
179 Product Specifications Other Information Product Specifications ■Projector Model name WUX500 WUX450ST Display system RGB liquid crystal system: reflective (LCOS) : 3 panels Optical systemColor separation by dichroic mirror / polarizing beam splitter and color composition by prism Display device Type / No. of panels Reflective liquid crystal panel (LCOS) / 3 panels Size / Aspect ratio 0.71 / 16:10 Drive system Active matrix system Number dots / Total number dots2,304,000 (1920 x 1200) x 3 panels / 6,912,000 Projection lens Zoom ratio / Focal length / F value1.8x / 21.7 – 39.0 mm / f2.8 – / 8.8 mm / f2.7 Zooming / Focus adjustmentManual / Manual – / Manual Lens shiftV: 0% to +60% (manual) H: ±10% (manual)V: 0% to +75% (manual) H: ±10% (manual) Light source, power consumption260 W / 200 W (Lamp mode Full power / Power saver)260 W / 200 W (Lamp mode Full power / Power saver) Image size (projection distance)40 to 300 (1.2 m to 16.2 m / 3.9 to 53.1)50 to 200 (0.61 m to 2.42 m / 2.0 to 7.9) Number of colors 16,770,000 colors (full color) Brightness* 1*2 (in presentation mode)5000 lumen 4500 lumen Contrast ratio* 22000:1 (Fully white:fully black, presentation mode) Ratio of brightness at periphery to center* 290% 80% Audio output monaural Speaker 5W x 1 Maximum input resolution 1920 x 1200 dots Video signals Analog PC inputWUXGA, WSXGA+, UXGA, WXGA+, SXGA+, SXGA, WXGA, XGA, SVGA, VGA (Scan frequency: Horizontal 15 to 75 kHz, Vertical 50 to 85 Hz) Digital PC inputWUXGA, WSXGA+, UXGA, WXGA+, SXGA+, SXGA, WXGA, XGA, SVGA, VGA HDMI / HDBaseT inputFrom connected computers: WUXGA, WSXGA+, UXGA, WXGA+, SXGA+, SXGA, WXGA, XGA, SVGA, VGA From connected AV equipment: 1080p, 1080i, 720p, 576p, 480p Component video input 1080PsF, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Product Specifications 180 Input terminal DVI-I terminal (29-pin DVI connector)Analog PC, Digital PC HDMI terminal HDMI (deep color only) ANALOG PC / COMPONENT terminal (mini D-sub 15-pin)Analog PC, Component HDBaseT terminal (RJ-45) Networked multi-projection, HDBaseT LAN terminal (RJ-45) Networked multi-projection USB Port (USB Mass Storage Class)JPEG images CONTROL terminal (RS-232C (D-sub 9-pin))User commands REMOTE terminal (3.5ø stereo mini jack)Wired remote control AUDIO IN terminal (3.5ø stereo mini jack x 2)Audio signal AUDIO OUT terminal (3.5ø stereo mini jack)Audio signal Input signal Digital PC TMDS (Transition Minimized Differential Signaling) Analog PC0.7Vp-p, positive polarity, impedance = 75Ω Horizontal / vertical synchronization: TTL level, negative or positive polarity Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance = 75Ω Component videoCOMPONENT: Separate Y Cb/Pb Cr/Pr signal Y: 1Vp-p, negative synchronization, impedance = 75Ω Cb/Pb: 0.7Vp-p, impedance = 75Ω Cr/Pr: 0.7Vp-p, impedance = 75Ω Audio Impedance = 47kΩ or more Noise 37 / 30dB (Lamp mode: Full power/Power saver) Operating temperature 0°C (32°F) - 40°C (104°F) Power supply AC100V - 240V 50 / 60Hz Power consumption Full power 365W Power saver 295W 260W Standby Networking and HDBaseT off0.2W Low-power networking on, HDBaseT off0.6W Networking off, HDBaseT on1.6W Low-power networking and HDBaseT on1.8W Dimensions (W x H x D)337 mm (W) x 136 mm (H) x 370 mm (D) / 13.3 (W) x 5.4 (H) x 14.6 (D) in (including the projection)337 mm (W) x 136 mm (H) x 415 mm (D) / 13.3 (W) x 5.4 (H) x 16.3 (D) in (including the projection) Model name WUX500 WUX450ST