Canon Projector WUX500 User Manual

							111
Menu Description
Advanced Guide
Menu Description
Wireless Networks
• Projector Access Point (PJ AP) Mode
The projector can be used as an access point for direct communication with 
wireless LAN-compatible computers.
Up to five computers can be connected at once.
The following network features are available in PJ AP mode.
• Web features
• NMPJ features (networked screen projection)
• User commands
Other network features (specifically, SNMP, PJLink, Mail, AMX, Crestron RoomView and 
Firm Update) are not available.
Wireless LAN-compatible 
computersProjector (in PJ AP mode) 
						

							Menu Description
112
• Infrastructure Mode
The projector can also be used as a wireless LAN client for connections to a 
wireless LAN access point.
In this case, the projector is connected to computers via the wireless LAN access 
point.
•Wired LAN features and wireless infrastructure mode cannot be used at the 
same time.
•Wireless LAN features are not available in standby mode.
•PJ AP and infrastructure modes cannot be used at the same time.
•Wired LAN and PJ AP mode cannot be used in the same subnetwork.
•Remember to set your preferred network (wired or wireless) to [On] if [Network 
(wired/wireless)] on the projector is set to [Off/Off] and the network connection is 
disabled. (P118) For wireless networks, choose the type of connection.
•Referring to “Checking Projector Information” (P146), confirm that the projector’s 
wired or wireless IP address is not the same as that of other computers on the 
network. To set a projector IP address, follow the instructions in “Completing 
Computer Settings” (P126) and use the web screen, or use projector TCP/IP 
settings. (P119, P123)
• The following network features are available in infrastructure mode.
-Web features
-Mail features
-NMPJ features (networked screen projection)
-User commands
Other network features (specifically, SNMP, PJLink, AMX, Crestron RoomView and Firm 
Update) are not available.
• The following restrictions apply in infrastructure mode.
-SSIDs not in single-byte letters or numbers will cause character corruption in search 
results.
-Connectivity using SSIDs not in single-byte letters or numbers cannot be ensured.
When multiple access points have the same SSID, only search results for the access 
point with the strongest signal are shown.
Wireless 
LAN-compatible 
computers
Access point
Computers 
connected to the 
network via LAN 
cableProjector 
(in infrastructure mode) 
						

							113
Menu Description
Advanced Guide
Menu Description
•When you connect the computer to the network for the first time, it is also 
necessary to perform settings on the computer. In this case, consult the network 
administrator regarding the necessary settings.
In a network environment where a DHCP server is operating, choose [On] on the 
projector [DHCP] screen to enable the DHCP function and connect it. (P119, P123) 
						

							Menu Description
114
Wireless LAN (Wi-Fi)
■Countries and Regions Where Wireless LAN Use Is 
Permitted
Use of the wireless LAN function is restricted under the laws, etc., of each country 
and region, and violation of these restrictions may be subject to punishment. Check 
the Canon website for a list of countries and regions where use of the wireless LAN 
function permitted. 
Canon assumes no responsibility whatsoever for problems, etc., that may arise 
from use of the wireless LAN function in countries and regions other than those 
listed.
■Model Number
WUX500/WUX450ST (including WLAN module model: ZC-ST)
This product is installed with the WLAN Module which is 
certified to standards set by IDA Singapore.
FCC/IC NOTICE
Model: WUX500/WUX450ST (including WLAN Module Model 
ZC-ST, FCC ID: AZD220)
This device complies with Part 15 of FCC Rules and Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) 
this device may not cause interference, and (2) this device must accept any 
interference, including interference that may cause undesired operation of this 
device.
This transmitter must not be co-located or operated in conjunction with any other 
antenna or transmitter except Canon accessories supplied or designated for this 
product.
This equipment complies with FCC/IC radiation exposure limits set forth for an 
uncontrolled environment and meets the FCC radio frequency (RF) Exposure 
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This 
equipment should be installed and operated keeping the radiator at least 20cm or 
more away from person’s body.
Complies with
IDA Standards
DB00671 
						

							115
Menu Description
Advanced Guide
Menu Description
Statement on EC directive
Please contact the following address for the original Declaration of Conformity:
CANON EUROPA N.V.
Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Canon Inc. tímto prohlašuje, že tento ZC-ST je ve shodě se základními požadavky a dalšími 
příslušnými ustanoveními směrnice 1999/5/ES.
Undertegnede Canon Inc. erklærer herved, at følgende udstyr ZC-ST overholder de 
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Hiermit erklärt Canon Inc., dass sich das Gerät ZC-ST in Übereinstimmung mit den grundlegenden 
Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Käesolevaga kinnitab Canon Inc. seadme ZC-ST vastavust direktiivi 1999/5/EÜ põhinõuetele 
ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Hereby, Canon Inc., declares that this ZC-ST is in compliance with the essential requirements 
and other relevant provisions of Directive 1999/5/EC.
Por medio de la presente Canon Inc. declara que el ZC-ST cumple con los requisitos 
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Canon Inc. ΔΗΛΩΝΕΙ ΟΤΙ ZC-ST ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ 
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Par la présente Canon Inc. déclare que l’appareil ZC-ST est conforme aux exigences 
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Con la presente Canon Inc. dichiara che questo ZC-ST è conforme ai requisiti essenziali ed 
alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Ar šo Canon Inc. deklarē, ka ZC-ST atbilst Direktīvas 1999/5/EK būtiskajām prasībām un 
citiem ar to saistītajiem noteikumiem.
Šiuo Canon Inc. deklaruoja, kad šis ZC-ST atitinka esminius reikalavimus ir kitas 1999/5/EB 
Direktyvos nuostatas.
Hierbij verklaart Canon Inc. dat het toestel ZC-ST in overeenstemming is met de essentiële 
eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Hawnhekk, Canon Inc., jiddikjara li dan ZC-ST jikkonforma mal-ħtiġijiet essenzjali u ma 
provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Alulírott, Canon Inc. nyilatkozom, hogy a ZC-ST megfelel a vonatkozó alapvetõ 
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Niniejszym Canon Inc. oświadcza, że ZC-ST jest zgodny z zasadniczymi wymogami oraz 
pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Canon Inc. declara que este ZC-ST está conforme com os requisitos essenciais e outras 
disposições da Directiva 1999/5/CE.
Canon Inc. izjavlja, da je ta ZC-ST v skladu z bistvenimi zahtevami in ostalimi relevantnimi 
določili direktive 1999/5/ES.
Canon Inc. týmto vyhlasuje, že ZC-ST spĺňa základné požiadavky a všetky príslušné 
ustanovenia Smernice 1999/5/ES.
Canon Inc. vakuuttaa täten että ZC-ST tyyppinen laite on direktiivin 1999/5/EY oleellisten 
vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Härmed intygar Canon Inc. att denna ZC-ST står I överensstämmelse med de väsentliga 
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Hér með lýsir Canon Inc. yfir því að ZC-ST er í samræmi við grunnkröfur og aðrar kröfur, sem 
gerðar eru í tilskipun 1999/5/EC.
Canon Inc. erklærer herved at utstyret ZC-ST er i samsvar med de grunnleggende krav og 
øvrige relevante krav i direktiv 1999/5/EF.
С настоящия документ Canon Inc. декларира, че ZC-ST е в съгласие с основните 
изисквания и съответните постановления на Директива 1999/5/ЕС.
Prin prezenta, Canon Inc. declară că acest ZC-ST este conform cu cerinţele principale şi cu 
celelalte prevederi relevante ale Directivei 1999/5/EC. 
						

							Menu Description
116
Completing Projector Settings
Settings described in this section apply to wired and wireless network 
connections, setting a network password, and other aspects of networked 
projection.
(When the input signal is Analog PC-1)
*Only available for wired connections.
MenuFunctionDetails
Network settings lock Lock network settings to prevent changes.P117
Network password 
settingSpecify whether network settings are password-
protected.P117
Register network 
passwordSet a network password.P117
Network standby settingsSpecify the extent of wired network functionality in 
standby mode.P118
Network (wired/wireless)Enable or disable wired or wireless network 
connectivity and the mode of operation.P118
Detailed settings (wired)Display and set advanced settings for wired 
connections.P119
Detailed settings 
(wireless)Display and set advanced settings for wireless 
connections.P121
PJLink* Enable or disable PJLink.P124
AMX Device Discovery* Enable or disable AMX Device Discovery.P125
Crestron RoomView* Enable or disable Crestron RoomView.P125 
						

							117
Menu Description
Advanced Guide
Menu Description
Network settings lock
> [Network Settings] > [Network settings lock] 
You can lock/unlock the network settings so that they cannot be changed.
Network password setting
> [Network settings] > [Network password setting] 
You can set whether or not a password is required in order to change the projector 
network settings.
Register network password
> [Network settings] > [Register network password] 
Use the [ ] / [ ] / [ ] / [ ] buttons to enter the projector network password.
OptionFunction
UnlockCancels the lock and allows other network settings to be changed. The 
password must be entered in order to cancel the lock. Use the [ ] / [ ] / 
[ ] / [ ] buttons to enter the 4-digit password.
Lock Lock the settings.
Forcibly canceling the network lock
Press these buttons in the following order to cancel the lock: [ ] [OK] [ ] [OK] [ ] [OK]. 
This operation resets the network password to [ ] [ ] [ ] [ ].
Setting [Network password setting] to [Off] leaves network settings unlocked.
OptionFunction
Off A network password is not used.
On A network password is used. 
						

							Menu Description
118
Network standby settings
> [Network settings] > [Network standby settings] 
Specify the operating status of wired network functions in standby mode.
Network (wired/wireless)
> [Network settings] > [Network (wired/wireless)] 
Enable or disable wired or wireless network connectivity and the mode of operation.
Specifying [Off] can save energy.
OptionFunction
NormalAll network functions are available even in standby mode, 
including the web screen, control over the network, and PJLink.
Low-powerAll network functions are available even in standby mode.
However, the projector may be less responsive than usual when 
some functions are initially used.
• [Low-power] may delay access over the network for some functions. For faster access, 
select [Normal].
• Power consumption when Network function (wired) is [On] varies depending on 
whether Network standby settings is set to Normal or Low-power.
• This setting can also be adjusted from the power saver settings screen by pressing the 
ECO button on the remote control.
OptionFunction
Off/Off  Disables the network function.
On/Off Enable only wired networking.
On/On (Pj AP) Enable both wired and wireless (PJ AP mode) networking.
Off/On (Pj AP) Enable only wireless (PJ AP mode) networking.
Off/On (Infra) Enable only wireless (infrastructure mode) networking.
Notes When Connected Wirelessly
• The [Network (wired/wireless)] setting cannot be changed when the projector is set to 
[Master] or [Slave] in PC-free multi projection mode.
• A message is displayed at the initial startup in PJ AP mode (P111) requesting that you 
check security key settings. 
						

							119
Menu Description
Advanced Guide
Menu Description
Detailed settings (wired)
> [Network settings] > [Detailed settings (wired)] 
Display and manually change the wired IP address, gateway address, and other 
settings. Available only when wired networking is [On].
MenuFunction
IP address Wired IP address of the projector.
Gateway address Wired gateway address of the projector.
MAC address Wired MAC address of the projector.
DHCP
TCP/IP settingsChange or specify the IP address, subnet mask, and gateway address 
used for connections.
OptionFunction
OffDisables the DHCP function. TCP/IP settings can be 
configured.
OnEnables the DHCP function. Searches the DHCP 
server. It will no longer be possible to enter TCP/IP 
settings (IP address, subnet mask, and gateway 
address), because the IP address is acquired from the 
DHCP server.
• Not required when [DHCP] is [On].
• If an invalid value is entered, the message “Invalid entry” 
appears. If this occurs, enter a valid value.
• When [Network (wired/wireless)] is set to [On/On (Pj AP)], 
“Cannot set identical segment IP” is displayed if you specify 
the same subnetwork as in PJ AP mode. Change the setting 
to a different subnetwork, or change [Network (wired/
wireless)] to [On/Off] before entering the wired IP address 
again. 
						

							Menu Description
120
Network setting 
initializationThe following network settings are initialized.
Settings configured from the projector menu
•Network settings lock (P117)
•Network password setting (P117)
•Register network password (P117)
•Network standby settings (P118)
•Network (wired/wireless) (P118)
•Detailed settings (wired) (P119)
-IP address (wired) (P119)
-Gateway address (wired) (P119)
-DHCP (wired) (P119)
-Subnet mask (wired) (P119)
•PJLink (P124)
•AMX Device Discovery settings (P125)
•Crestron RoomView settings (P125)
•IP addresses of destination projectors configured for PC-free multi 
projection
Settings configured from the web screen
•[Password] (P132)
•[Wired] (P133)
-DHCP (P133)
-IP address (P133)
-Subnet mask (P133)
-Default gateway (P133)
•[NMPJ Password] (P135)
•[Mail] (P136)
•[Mail auth] (P137)
•[SNMP] (P138)
•
[Projector info.] (P139)
MenuFunction