Canon Projector SX80 User Manual
Here you can view all the pages of manual Canon Projector SX80 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51Adjusting Image
Projecting an Image
Adjusting the Image Size
Use the ZOOM button to adjust the size of the projecting image.
Change the projector installation position if your desired image is too large or too small to
adjust it with the zoom function. (P31)
1Press the ZOOM button to pop up a window shown at the lower right.
2Press the pointer buttons to adjust the image size.
3When the image size is determined, press the OK button or the ZOOM button.
Remote controlTop control
[ ] / [ ]: Rough...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-50.png "Page 51
51Adjusting Image
Projecting an Image
Adjusting the Image Size
Use the ZOOM button to adjust the size of the projecting image.
Change the projector installation position if your desired image is too large or too small to
adjust it with the zoom function. (P31)
1Press the ZOOM button to pop up a window shown at the lower right.
2Press the pointer buttons to adjust the image size.
3When the image size is determined, press the OK button or the ZOOM button.
Remote controlTop control
[ ] / [ ]: Rough...")
51Adjusting Image Projecting an Image Adjusting the Image Size Use the ZOOM button to adjust the size of the projecting image. Change the projector installation position if your desired image is too large or too small to adjust it with the zoom function. (P31) 1Press the ZOOM button to pop up a window shown at the lower right. 2Press the pointer buttons to adjust the image size. 3When the image size is determined, press the OK button or the ZOOM button. Remote controlTop control [ ] / [ ]: Rough...
Page 52
Adjusting Image 52 Adjusting the Focus You can adjust the focus with the FOCUS button. The projection image may be out of focus if the projection distance is beyond the range of 1.2 m (3.9) to 9.1 m (29.6). Move the projector installation position if such is the case. (P31) ■Auto focusing Press the FOCUS button, and then the AUTO SET button. ■Manual focusing 1Press the FOCUS button to pop up a window shown at the lower right. 2Press the pointer buttons to adjust the focus. 3When the focus is adjusted...
Page 53
53Adjusting Image Projecting an Image Adjusting Keystone Distortion The D.SHIFT/KEYSTONE button corrects the keystone distortion. ■Auto adjustment Press the D.SHIFT/KEYSTONE button, and then the AUTO SET button. ■Manual adjustment 1Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right. 2Press the pointer buttons to adjust the focus. Keystone can be adjusted within the range of ± 20 degrees. If the keystone distortion is too large to adjust, move the projector installation...
Page 54
![Page 54
Adjusting Image
54
3When the keystone distortion has been adjusted, press the OK button.
Perform the following steps to reset the keystone adjustment.
Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window.
On the window, select [OK] with [](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-53.png "Page 54
Adjusting Image
54
3When the keystone distortion has been adjusted, press the OK button.
Perform the following steps to reset the keystone adjustment.
Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window.
On the window, select [OK] with [")
Adjusting Image 54 3When the keystone distortion has been adjusted, press the OK button. Perform the following steps to reset the keystone adjustment. Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window. On the window, select [OK] with [
Page 55
![Page 55
55
Projecting an Image
Selecting Screen Aspect and Aspect
Select an optimum aspect ratio of the projecting image (screen aspect) or an optimum
screen mode (aspect) according to the aspect ratio of the screen, type of input image
signal and so on for the projection making best use of the screen size.
[Screen aspect]: Select the same aspect ratio as that of the screen in use.
[Aspect]: Select [Auto] unless the type of input signal is [VIDEO].
You may need to change the setting depending on the...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-54.png "Page 55
55
Projecting an Image
Selecting Screen Aspect and Aspect
Select an optimum aspect ratio of the projecting image (screen aspect) or an optimum
screen mode (aspect) according to the aspect ratio of the screen, type of input image
signal and so on for the projection making best use of the screen size.
[Screen aspect]: Select the same aspect ratio as that of the screen in use.
[Aspect]: Select [Auto] unless the type of input signal is [VIDEO].
You may need to change the setting depending on the...")
55 Projecting an Image Selecting Screen Aspect and Aspect Select an optimum aspect ratio of the projecting image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection making best use of the screen size. [Screen aspect]: Select the same aspect ratio as that of the screen in use. [Aspect]: Select [Auto] unless the type of input signal is [VIDEO]. You may need to change the setting depending on the...
Page 56
![Page 56
Selecting Screen Aspect and Aspect
56
4Use [ ] / [ ] to select a screen aspect type.
4:3
Select this when you use a screen with aspect ratio of
4:3.
Suitable for projecting computer screen images or
visual software having aspect ratio or 4:3 or 5:4.
16:9
Select this when you use a screen with aspect ratio of
16:9. Suitable for projecting computer screen images
having aspect ratio of 16:9 or close to it.
16:9 D. image shift
Select this when you use a screen with aspect ratio of
16:9. Suitable for...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-55.png "Page 56
Selecting Screen Aspect and Aspect
56
4Use [ ] / [ ] to select a screen aspect type.
4:3
Select this when you use a screen with aspect ratio of
4:3.
Suitable for projecting computer screen images or
visual software having aspect ratio or 4:3 or 5:4.
16:9
Select this when you use a screen with aspect ratio of
16:9. Suitable for projecting computer screen images
having aspect ratio of 16:9 or close to it.
16:9 D. image shift
Select this when you use a screen with aspect ratio of
16:9. Suitable for...")
Selecting Screen Aspect and Aspect 56 4Use [ ] / [ ] to select a screen aspect type. 4:3 Select this when you use a screen with aspect ratio of 4:3. Suitable for projecting computer screen images or visual software having aspect ratio or 4:3 or 5:4. 16:9 Select this when you use a screen with aspect ratio of 16:9. Suitable for projecting computer screen images having aspect ratio of 16:9 or close to it. 16:9 D. image shift Select this when you use a screen with aspect ratio of 16:9. Suitable for...
Page 57
![Page 57
57Selecting Screen Aspect and Aspect
Projecting an Image
■Moving Image with 16:9 D. Image Shift
1Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right.
2Use [ ] / [ ] to move the image.
3When the image shift adjustment has been completed, press the OK button.
Perform the following steps to reset the image shift adjustment.
Press the D.SHIFT/KEYSTONE button twice to display the [D.Image Shift reset] window.
On the window, select [OK] with [](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-56.png "Page 57
57Selecting Screen Aspect and Aspect
Projecting an Image
■Moving Image with 16:9 D. Image Shift
1Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right.
2Use [ ] / [ ] to move the image.
3When the image shift adjustment has been completed, press the OK button.
Perform the following steps to reset the image shift adjustment.
Press the D.SHIFT/KEYSTONE button twice to display the [D.Image Shift reset] window.
On the window, select [OK] with [")
57Selecting Screen Aspect and Aspect Projecting an Image ■Moving Image with 16:9 D. Image Shift 1Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right. 2Use [ ] / [ ] to move the image. 3When the image shift adjustment has been completed, press the OK button. Perform the following steps to reset the image shift adjustment. Press the D.SHIFT/KEYSTONE button twice to display the [D.Image Shift reset] window. On the window, select [OK] with [
Page 58
Selecting Screen Aspect and Aspect 58 Selecting Aspect Ratio Select the aspect ratio of projecting image based on the input signal type, aspect ratio of the screen and resolution. For more details on the aspect ratios, refer to When Projecting an Image from a Com- puter on page 131. ■Types of Aspect Ratios Auto An image is projected at an aspect ratio of the input signal. Select this mode for normal image projection. 4:3 An image is projected at an aspect ratio of 4:3. Select this to project computer...
Page 59
59Selecting Screen Aspect and Aspect Projecting an Image ■How to Select an Aspect Ratio Press the ASPECT button on the remote control to select an appropriate aspect ratio. The selection is toggled among types for aspect ratios by pressing the ASPECT button. For more details on the aspect ratios, refer to When Projecting an Image from a Computer on page 131. You can also select any aspect ratio from the menu. (P73) Some aspect ratios may not appear depending on types of input signals. Remote control
Page 60
60 Selecting an Image Mode You can select an image mode depending on the projecting image. You can also adjust the brightness, contrast, sharpness, and gamma, and make color correction and advanced adjustments. (P85) ■Image modes Standard Select this to project an image with near-original quality and a high regard for reproduc- tion of white. It is suited to project text-based computer screens or visual software (mov- ing pictures) in a bright room. Presentation Select this to project an image with...