Canon Projector SX80 User Manual
Here you can view all the pages of manual Canon Projector SX80 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
81Setting Display Status
Setting Up Functions from Menus
Reversing projection
[Image flip H/V]
You can make this setting if you want to
hang the projector from the ceiling or
project an image from behind the screen.
Press the OK button to accept your setting
and then press the MENU button.
[None] is the factory default. To hung the projector from the ceiling,
use the optional bracket. Contact your
Canon dealer.
The keystone distortion adjustment will
be reset.
HDMICOMPONENT
DIGITAL...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-80.png "Page 81
81Setting Display Status
Setting Up Functions from Menus
Reversing projection
[Image flip H/V]
You can make this setting if you want to
hang the projector from the ceiling or
project an image from behind the screen.
Press the OK button to accept your setting
and then press the MENU button.
[None] is the factory default. To hung the projector from the ceiling,
use the optional bracket. Contact your
Canon dealer.
The keystone distortion adjustment will
be reset.
HDMICOMPONENT
DIGITAL...")
81Setting Display Status Setting Up Functions from Menus Reversing projection [Image flip H/V] You can make this setting if you want to hang the projector from the ceiling or project an image from behind the screen. Press the OK button to accept your setting and then press the MENU button. [None] is the factory default. To hung the projector from the ceiling, use the optional bracket. Contact your Canon dealer. The keystone distortion adjustment will be reset. HDMICOMPONENT DIGITAL...
Page 82
![Page 82
Setting Display Status
82
Capturing a Logo
[User screen settings] - [Logo capture]
You can capture a part of the images
being projected as [User logo].
A screen for capturing images is dis-
played.
For projecting the captured log on a
screen, select [User logo] on the [Pro-
jector on], [No signal screen], [Screen
when blank].
You may not capture an image depend-
ing on the resolution and scan system.
You cannot capture an image when
[16:9] or [16:9 D. image shift] is
selected for [Screen...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-81.png "Page 82
Setting Display Status
82
Capturing a Logo
[User screen settings] - [Logo capture]
You can capture a part of the images
being projected as [User logo].
A screen for capturing images is dis-
played.
For projecting the captured log on a
screen, select [User logo] on the [Pro-
jector on], [No signal screen], [Screen
when blank].
You may not capture an image depend-
ing on the resolution and scan system.
You cannot capture an image when
[16:9] or [16:9 D. image shift] is
selected for [Screen...")
Setting Display Status 82 Capturing a Logo [User screen settings] - [Logo capture] You can capture a part of the images being projected as [User logo]. A screen for capturing images is dis- played. For projecting the captured log on a screen, select [User logo] on the [Pro- jector on], [No signal screen], [Screen when blank]. You may not capture an image depend- ing on the resolution and scan system. You cannot capture an image when [16:9] or [16:9 D. image shift] is selected for [Screen...
Page 83
![Page 83
83Setting Display Status
Setting Up Functions from Menus
Displaying a User Logo (No signal screen)
[User screen settings] - [No signal screen]
You can display a user logo on a screen
when there is no input signal.
Press the OK button to accept your setting
and then press the MENU button.
[Blue] is the factory default.
[User logo] is available only when a
users logo has been registered.
Displaying a User Logo (BLANK)
[User screen settings] - [Screen when blank]
You can display a user logo a screen...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-82.png "Page 83
83Setting Display Status
Setting Up Functions from Menus
Displaying a User Logo (No signal screen)
[User screen settings] - [No signal screen]
You can display a user logo on a screen
when there is no input signal.
Press the OK button to accept your setting
and then press the MENU button.
[Blue] is the factory default.
[User logo] is available only when a
users logo has been registered.
Displaying a User Logo (BLANK)
[User screen settings] - [Screen when blank]
You can display a user logo a screen...")
83Setting Display Status Setting Up Functions from Menus Displaying a User Logo (No signal screen) [User screen settings] - [No signal screen] You can display a user logo on a screen when there is no input signal. Press the OK button to accept your setting and then press the MENU button. [Blue] is the factory default. [User logo] is available only when a users logo has been registered. Displaying a User Logo (BLANK) [User screen settings] - [Screen when blank] You can display a user logo a screen...
Page 84
![Page 84
Setting Display Status
84
Selecting a Logo at Startup
[User screen settings] - [Projector on]
You can display a specified logo on a
screen from the moment the projector is
turned on to the moment it is ready fro pro-
jection.
Press the OK button to accept your setting
and then press the MENU button.
[Canon logo] is the factory default.
[User logo] is available only when a
users logo has been registered.
Selecting Aspect Ratio of Screen
[Screen aspect]
You can select proper option corresponding...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-83.png "Page 84
Setting Display Status
84
Selecting a Logo at Startup
[User screen settings] - [Projector on]
You can display a specified logo on a
screen from the moment the projector is
turned on to the moment it is ready fro pro-
jection.
Press the OK button to accept your setting
and then press the MENU button.
[Canon logo] is the factory default.
[User logo] is available only when a
users logo has been registered.
Selecting Aspect Ratio of Screen
[Screen aspect]
You can select proper option corresponding...")
Setting Display Status 84 Selecting a Logo at Startup [User screen settings] - [Projector on] You can display a specified logo on a screen from the moment the projector is turned on to the moment it is ready fro pro- jection. Press the OK button to accept your setting and then press the MENU button. [Canon logo] is the factory default. [User logo] is available only when a users logo has been registered. Selecting Aspect Ratio of Screen [Screen aspect] You can select proper option corresponding...
Page 85
![Page 85
85
Setting Up Functions from Menus
Setting the Image Quality
Selecting an Image Quality
[Image mode]
You can select an image mode suitable for
the projecting image.
You can select it also with the IMAGE but-
ton on the remote control.
Press the OK button to accept your setting
and then press the MENU button.
[Standard] is the factory default.
You can decide the image quality by
adjusting the following items in each
image mode:
[Brightness], [Contrast], [Sharpness],
[Gamma], [Color adjustment],...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-84.png "Page 85
85
Setting Up Functions from Menus
Setting the Image Quality
Selecting an Image Quality
[Image mode]
You can select an image mode suitable for
the projecting image.
You can select it also with the IMAGE but-
ton on the remote control.
Press the OK button to accept your setting
and then press the MENU button.
[Standard] is the factory default.
You can decide the image quality by
adjusting the following items in each
image mode:
[Brightness], [Contrast], [Sharpness],
[Gamma], [Color adjustment],...")
85 Setting Up Functions from Menus Setting the Image Quality Selecting an Image Quality [Image mode] You can select an image mode suitable for the projecting image. You can select it also with the IMAGE but- ton on the remote control. Press the OK button to accept your setting and then press the MENU button. [Standard] is the factory default. You can decide the image quality by adjusting the following items in each image mode: [Brightness], [Contrast], [Sharpness], [Gamma], [Color adjustment],...
Page 86
![Page 86
Setting the Image Quality
86
Adjusting the Brightness
[Brightness]
You can adjust the brightness of images.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Adjusting the Contrast
[Contrast]
You can adjust the contrast of images.
If you want to make it more or less vivid,
adjust the difference in tone between the
lightest and darkest portions of the image.
When you have...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-85.png "Page 86
Setting the Image Quality
86
Adjusting the Brightness
[Brightness]
You can adjust the brightness of images.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Adjusting the Contrast
[Contrast]
You can adjust the contrast of images.
If you want to make it more or less vivid,
adjust the difference in tone between the
lightest and darkest portions of the image.
When you have...")
Setting the Image Quality 86 Adjusting the Brightness [Brightness] You can adjust the brightness of images. When you have completed the adjust- ment, press the MENU button. The adjustment you have made is stored as an adjusted value of input sig- nals being projected in an image mode. Adjusting the Contrast [Contrast] You can adjust the contrast of images. If you want to make it more or less vivid, adjust the difference in tone between the lightest and darkest portions of the image. When you have...
Page 87
![Page 87
87Setting the Image Quality
Setting Up Functions from Menus
Adjusting the Sharpness
[Sharpness]
You can adjust the sharpness of images.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Making a Gamma Correction
[Gamma]
You can correct a part of an image where
details are indistinguishable due to too
dark or too light tone.
When you have completed the adjust-
ment, press...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-86.png "Page 87
87Setting the Image Quality
Setting Up Functions from Menus
Adjusting the Sharpness
[Sharpness]
You can adjust the sharpness of images.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Making a Gamma Correction
[Gamma]
You can correct a part of an image where
details are indistinguishable due to too
dark or too light tone.
When you have completed the adjust-
ment, press...")
87Setting the Image Quality Setting Up Functions from Menus Adjusting the Sharpness [Sharpness] You can adjust the sharpness of images. When you have completed the adjust- ment, press the MENU button. The adjustment you have made is stored as an adjusted value of input sig- nals being projected in an image mode. Making a Gamma Correction [Gamma] You can correct a part of an image where details are indistinguishable due to too dark or too light tone. When you have completed the adjust- ment, press...
Page 88
![Page 88
Setting the Image Quality
88
Making Color Adjustment (HDMI/PC/USB)
[Color adjustment]
You can adjust the color quality of images
for each of primary colors, red, green and
blue.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Adjusting a color makes mark shown
in [Color adjustment] in the menu.
Making Color Adjustment
(COMPONENT/VIDEO/S-VIDEO)
[Color adjustment]
You...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-87.png "Page 88
Setting the Image Quality
88
Making Color Adjustment (HDMI/PC/USB)
[Color adjustment]
You can adjust the color quality of images
for each of primary colors, red, green and
blue.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Adjusting a color makes mark shown
in [Color adjustment] in the menu.
Making Color Adjustment
(COMPONENT/VIDEO/S-VIDEO)
[Color adjustment]
You...")
Setting the Image Quality 88 Making Color Adjustment (HDMI/PC/USB) [Color adjustment] You can adjust the color quality of images for each of primary colors, red, green and blue. When you have completed the adjust- ment, press the MENU button. The adjustment you have made is stored as an adjusted value of input sig- nals being projected in an image mode. Adjusting a color makes mark shown in [Color adjustment] in the menu. Making Color Adjustment (COMPONENT/VIDEO/S-VIDEO) [Color adjustment] You...
Page 89
![Page 89
89Setting the Image Quality
Setting Up Functions from Menus
Making Advanced Adjustment (Noise reduc-
tion)
[Advanced adjustment] - [Noise reduction]
You can reduce noise of picture.
Press the OK button to accept your setting
and then press the MENU button.
[Off] is the factory default.
Noise reduction may produce an after-
image for quick footage.
Select [Weak] for quick footage. Select
[Strong] for slow footage.
The setting you have made is stored as
a setting value of input signals being...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-88.png "Page 89
89Setting the Image Quality
Setting Up Functions from Menus
Making Advanced Adjustment (Noise reduc-
tion)
[Advanced adjustment] - [Noise reduction]
You can reduce noise of picture.
Press the OK button to accept your setting
and then press the MENU button.
[Off] is the factory default.
Noise reduction may produce an after-
image for quick footage.
Select [Weak] for quick footage. Select
[Strong] for slow footage.
The setting you have made is stored as
a setting value of input signals being...")
89Setting the Image Quality Setting Up Functions from Menus Making Advanced Adjustment (Noise reduc- tion) [Advanced adjustment] - [Noise reduction] You can reduce noise of picture. Press the OK button to accept your setting and then press the MENU button. [Off] is the factory default. Noise reduction may produce an after- image for quick footage. Select [Weak] for quick footage. Select [Strong] for slow footage. The setting you have made is stored as a setting value of input signals being...
Page 90
![Page 90
Setting the Image Quality
90
Making Advanced Adjustment (Mem. color
correct)
[Advanced adjustment] - [Mem. color correct]
You can correct colors (e.g. blue sky, field
of grass, skin) in our memory so that they
can be projected more vividly.
Press the OK button to accept your setting
and then press the MENU button.
[Off] is the factory default.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Adjusting Fine Color Adjustment (6-axis...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-89.png "Page 90
Setting the Image Quality
90
Making Advanced Adjustment (Mem. color
correct)
[Advanced adjustment] - [Mem. color correct]
You can correct colors (e.g. blue sky, field
of grass, skin) in our memory so that they
can be projected more vividly.
Press the OK button to accept your setting
and then press the MENU button.
[Off] is the factory default.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Adjusting Fine Color Adjustment (6-axis...")
Setting the Image Quality 90 Making Advanced Adjustment (Mem. color correct) [Advanced adjustment] - [Mem. color correct] You can correct colors (e.g. blue sky, field of grass, skin) in our memory so that they can be projected more vividly. Press the OK button to accept your setting and then press the MENU button. [Off] is the factory default. The adjustment you have made is stored as an adjusted value of input sig- nals being projected in an image mode. Adjusting Fine Color Adjustment (6-axis...