Canon Projector SX80 User Manual

101
Setting Up Functions from Menus
Checking the Information of the Projector
[Information]
You can confirm the information about the 
signal types of the images projected and 
other projector-specific information.
Information shown
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
ItemMeaning
Model nameModel name of this projector
Input signalDetails of the input signal currently selected
“Type of signal”, “resolution of signal”, “frequency” and 
other information is shown.
FirmwareCurrent firmware...

102 

103
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an 
USB Flash Memory
Connecting the Projector to Network
Appendix
Index
Projecting an 
Image from a 
Digital Camera 
or an USB Flash 
Memory 

104
Projecting an Image from a Digital Camera
This projector supports PictBridge. You can directly 
project an image by connecting the projector with a 
PictBridge-compatible digital camera, digital video 
camera or camera-equipped mobile phone (hereinafter 
called PictBridge-compatible device).
Connecting a Digital Camera
1Turn the projector power on.
2Switch the input signal to [USB].
Press the INPUT button, select [USB] with  [ ] / [ ] buttons, and press the OK button.
 If you switch to [USB] when a...

105Projecting an Image from a Digital Camera
Projecting an Image from a Digital Camera or an USB Flash Memory
3Connect a PictBridge-compatible device with the projector using a USB cable.
The terminal form of the device varies depending on the model. Refer to the Users 
Manual for the relevant equipment.
4Turn on the power of the PictBridge-compatible device.
When the communication is ready between the projector and the PictBridge-compat-
ible device, the following mark appears.
If the projector does not...

Projecting an Image from a Digital Camera
106
Operating the Projected Image
When images are projected, you can perform the following operations.
■Switching to the Next Image
If you have specified multiple images for printing with the digital camera, you can switch 
to the next image by pressing the OK button.
 You cannot switch to the previous image with the projector operation. To switch to the 
previous image, you must retry the print command with the digital camera.
 Even if a slideshow is running,...

107Projecting an Image from a Digital Camera
Projecting an Image from a Digital Camera or an USB Flash Memory
Running a Slideshow
You can run a slideshow that projects multiple images stored in the digital camera at cer-
tain intervals.
■Setting a Slideshow Interval
By setting projection intervals in [Slideshow interval] from the menu, you can run a slide-
show of the images (with PictBridge or from a USB flash memory) connected via USB.
Set the slideshow interval by following the steps below.
1Press the...

108
Projecting Data on USB Flash Memory
You can connect a USB flash memory to the projector 
for direct projection of the images (saved in JPEG for-
mat) saved in the USB flash memory.
 Images saved only in JPEG format are available for 
projection.
Connecting an USB Flash Memory
1Turn the projector power on.
2Switch the input signal to [USB].
Press the INPUT button, select [USB] with  [ ] / [ ] buttons, and press the OK button.
If you switch to [USB] when a USB flash memory is not 
connected or the...

109Projecting Data on USB Flash Memory
Projecting an Image from a Digital Camera or an USB Flash Memory
3Connect a USB flash memory.
Connect a USB flash memory to the USB terminal.
Use a USB cable to connect a digital camera or USB memory card reader.
Be sure to use the USB cable supplied with the equipment connected to the projec-
tor.
If the projector recognizes a USB flash memory, The USB file browser appears.
 Only the drive which has been set in advance is displayed.
 If multiple memory devices...

Projecting Data on USB Flash Memory
110
Description of USB File Browser
If a USB flash memory is connected to the projector, the USB file browser appears.
In the USB file browser, you can select the image file to be projected by operating the file 
list in the USB memory device.
List title
Drive name currently selected
Representation varies depending on the manufacturer and/or model.
Page number of the file list currently displayed
(Current page number/total number of pages)
You can page up and down with...