Canon Projector SX80 User Manual
Here you can view all the pages of manual Canon Projector SX80 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
111Projecting Data on USB Flash Memory Projecting an Image from a Digital Camera or an USB Flash Memory Selecting an Image for Projection This section describes the steps for selecting an image in the USB file browser and pro- jecting on the screen. ■Selecting a Drive If a USB flash memory is connected, skip this step. If a USB memory card reader having multiple memory slots is connected, the drive (mem- ory slot) list is displayed in the file list. Select the drive in which the memory card is inserted...
Page 112
![Page 112
Projecting Data on USB Flash Memory
112
■Selecting an Image File for Projection
1Select an image file with [ ] / [ ].
To return to upper hierarchy, select and press the OK button.
2Press the OK button to project the image in full screen.
To return to the USB file browser, press the OK button.](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-111.png "Page 112
Projecting Data on USB Flash Memory
112
■Selecting an Image File for Projection
1Select an image file with [ ] / [ ].
To return to upper hierarchy, select and press the OK button.
2Press the OK button to project the image in full screen.
To return to the USB file browser, press the OK button.")
Projecting Data on USB Flash Memory 112 ■Selecting an Image File for Projection 1Select an image file with [ ] / [ ]. To return to upper hierarchy, select and press the OK button. 2Press the OK button to project the image in full screen. To return to the USB file browser, press the OK button.
Page 113
![Page 113
113Projecting Data on USB Flash Memory
Projecting an Image from a Digital Camera or an USB Flash Memory
Operating the Projected Image
When images are projected, you can perform the following operations.
■Switching to the Previous/Next Image
If multiple image files are saved in a folder, you can switch to the previous/next image by
pressing [ ] / [ ].
■Rotating an Image
You can rotate the image by 90 degrees to the left or to the right by pressing [].
Even if a slideshow is running, you can rotate the...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-112.png "Page 113
113Projecting Data on USB Flash Memory
Projecting an Image from a Digital Camera or an USB Flash Memory
Operating the Projected Image
When images are projected, you can perform the following operations.
■Switching to the Previous/Next Image
If multiple image files are saved in a folder, you can switch to the previous/next image by
pressing [ ] / [ ].
■Rotating an Image
You can rotate the image by 90 degrees to the left or to the right by pressing [].
Even if a slideshow is running, you can rotate the...")
113Projecting Data on USB Flash Memory Projecting an Image from a Digital Camera or an USB Flash Memory Operating the Projected Image When images are projected, you can perform the following operations. ■Switching to the Previous/Next Image If multiple image files are saved in a folder, you can switch to the previous/next image by pressing [ ] / [ ]. ■Rotating an Image You can rotate the image by 90 degrees to the left or to the right by pressing []. Even if a slideshow is running, you can rotate the...
Page 114
Projecting Data on USB Flash Memory 114 Running a Slideshow of Data saved in a USB Flash Memory You can run a slideshow that projects multiple images stored in a USB flash memory at certain intervals. ■Creating an Image File Folder In the slideshow, image files in a folder are displayed in the alphabetical order of file name. Therefore, create a folder in the USB flash memory and save the image files to be projected in the slideshow in advance. To start a slideshow, select and project the first image...
Page 115
115 Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash Memory Connecting the Projector to Network Appendix Index Connecting the Projector to Network
Page 116
116 Setting an IP Address It is possible to send an error notification e-mail (P119) from the projector to the computer when you connect the projector to the network. To connect via the network, an IP address must be assigned to the projector. Set an IP address by following the steps below. (The examples shown are Windows XP screenshot images.) ■Setting IP Address 1Connect the projector and a computer directly via a cross type LAN cable. 2Turn on the power of the projector and computer. 3Open [Control...
Page 117
![Page 117
117Setting an IP Address
Operating the Projector over Network
■If You Want to Reset the IP Address Setting
1Turn off the projector, and remove the LAN cable.
2Follow the steps 3 to 6 to restore the computers IP address and subnet mask that you
have written down to the original values.
■Setting Network
1Launch a web browser, enter http://192.168.254.254 in the address, and click the
[OK] button.
The login dialog box appears.
2In the password setting screen, enter root for [User name] and system for...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-116.png "Page 117
117Setting an IP Address
Operating the Projector over Network
■If You Want to Reset the IP Address Setting
1Turn off the projector, and remove the LAN cable.
2Follow the steps 3 to 6 to restore the computers IP address and subnet mask that you
have written down to the original values.
■Setting Network
1Launch a web browser, enter http://192.168.254.254 in the address, and click the
[OK] button.
The login dialog box appears.
2In the password setting screen, enter root for [User name] and system for...")
117Setting an IP Address Operating the Projector over Network ■If You Want to Reset the IP Address Setting 1Turn off the projector, and remove the LAN cable. 2Follow the steps 3 to 6 to restore the computers IP address and subnet mask that you have written down to the original values. ■Setting Network 1Launch a web browser, enter http://192.168.254.254 in the address, and click the [OK] button. The login dialog box appears. 2In the password setting screen, enter root for [User name] and system for...
Page 118
![Page 118
Setting an IP Address
118
4Click [TCP/IP] from the menu, enter IP address, Subnet mask and Default gateway to
be assigned for the projector, and click the [OK] button.
[IP address]: IP address of projector
[Subnet mask]: Subnet mask of projector
[Default gateway]: Default gateway of network
5Click [Mail] from the menu, enter information in the following fields, and click the [OK]
button.
[To:]: E-mail address to which error notification message is sent.
[Cc:]: Second E-mail address to which error...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-117.png "Page 118
Setting an IP Address
118
4Click [TCP/IP] from the menu, enter IP address, Subnet mask and Default gateway to
be assigned for the projector, and click the [OK] button.
[IP address]: IP address of projector
[Subnet mask]: Subnet mask of projector
[Default gateway]: Default gateway of network
5Click [Mail] from the menu, enter information in the following fields, and click the [OK]
button.
[To:]: E-mail address to which error notification message is sent.
[Cc:]: Second E-mail address to which error...")
Setting an IP Address 118 4Click [TCP/IP] from the menu, enter IP address, Subnet mask and Default gateway to be assigned for the projector, and click the [OK] button. [IP address]: IP address of projector [Subnet mask]: Subnet mask of projector [Default gateway]: Default gateway of network 5Click [Mail] from the menu, enter information in the following fields, and click the [OK] button. [To:]: E-mail address to which error notification message is sent. [Cc:]: Second E-mail address to which error...
Page 119
![Page 119
119Setting an IP Address
Operating the Projector over Network
6Click [Apply] in the menu. When Save and apply settings. OK? message appears,
click the [OK] button.
This completes the IP address setting of the projector.
■If You Want to Reset the Network Setting
1Access to the projector from web browser by performing the step 1 on “Setting Net-
work (P117).”
2Click [Initialize] in the network setting page.
3Click the [OK] button when “Initialize network settings?” message appears.
To restore the...](http://img.usermanuals.tech/thumb/14/98791/w300_projector_manual_4298_d-118.png "Page 119
119Setting an IP Address
Operating the Projector over Network
6Click [Apply] in the menu. When Save and apply settings. OK? message appears,
click the [OK] button.
This completes the IP address setting of the projector.
■If You Want to Reset the Network Setting
1Access to the projector from web browser by performing the step 1 on “Setting Net-
work (P117).”
2Click [Initialize] in the network setting page.
3Click the [OK] button when “Initialize network settings?” message appears.
To restore the...")
119Setting an IP Address Operating the Projector over Network 6Click [Apply] in the menu. When Save and apply settings. OK? message appears, click the [OK] button. This completes the IP address setting of the projector. ■If You Want to Reset the Network Setting 1Access to the projector from web browser by performing the step 1 on “Setting Net- work (P117).” 2Click [Initialize] in the network setting page. 3Click the [OK] button when “Initialize network settings?” message appears. To restore the...
Page 120
120