Canon Projector SX80 User Manual

91Setting the Image Quality
Setting Up Functions from Menus
Reducing the Lamp Brightness
[Lamp mode]
Reducing the lamp brightness reduces 
power consumption and cooling fan noise. 
You can enable or disable this mode also 
with the LAMP button on the remote con-
trol.
Press the OK button to accept your setting 
and then press the MENU button.
 [Normal] is the factory default.
 The setting you have made is stored as 
a setting value of input signals being 
projected in an image mode.
Resetting the Image...

92
Setting Various Function
Setting Auto Setup Function
[Auto setup]
You can select an items you want to 
enable in the auto setup function.
Select [On] for the items if you want to 
enable in auto setup function.
Press the OK button to accept your setting 
and then press the MENU button.
 The factory default settings are as fol-
lows:
[Auto focus]: [On]
[Auto keystone]: [On]
[Auto input]: [On]
[Auto screen color]: [Off]
 You cannot change any items in [Auto 
setup] if [16:9 D. Image shift] is selected...

93Setting Various Function
Setting Up Functions from Menus
Skip the POWER Button Operation
[Direct power on]
You can turn on the projector only by con-
necting the power cable without pressing 
the POWER button.
Press the OK button to accept your setting 
and then press the MENU button.
 [Off] is the factory default.
Enabling/Disabling the Beep
[Beep]
You can select whether a beep sounds or 
not when you operate the projector.
Press the OK button to accept your setting 
and then press the MENU button.
...

Setting Various Function
94
Prohibiting the Projector Operation
[Key lock]
You can prohibit the operation of the projector 
from either the top control or remote control.
Press the OK button to accept your setting 
and then press the MENU button.
 [Off] is the factory default.
Selecting a Display Language
[Language]
You can select the language in which the 
menu is displayed.
Use [ ] / [ ] / [] to select the lan-
guage to be used in the menu, then press 
the OK button.
When the setting is completed,...

95Setting Various Function
Setting Up Functions from Menus
Showing/hiding the Guide Screen
[Guide]
You can select whether to show or hide the 
guide screen which explains operations.
Press the OK button to accept your setting 
and then press the MENU button.
 [On] is the factory default.
 The guide screen is shown when:
- Power is turned off by pressing the 
POWER button (P61).
- No input signal can be detected 
(P44).
- An invalid button is pressed in the 
[BLANK], [FREEZE], or [D.ZOOM] 
mode (P64,...

Setting Various Function
96
Setting for Slideshow
[Slideshow interval]
You can project the images stored in a 
PictBridge-compatible device (P104) or a 
USB flash memory (P108) in the slide-
show.
Use [] to set the interval (minutes : 
seconds) of projection (60 minutes = max-
imum).
Set [-- : --] if no slideshow is performed.
When the setting is completed, press the 
MENU button.
 [-- : --] is the factory default.
 The maximum length of slideshow time 
is 60 minutes (60:00).
 Use the USB file browser...

97Setting Various Function
Setting Up Functions from Menus
Extending the Menu Display Time
[Other settings] - [Menu display time]
You can extend the menu display time, 
which is 30 seconds usually, to 3 minutes.
Press the OK button to accept your setting 
and then press the MENU button.
 [Normal] is the factory default.
 You cannot extend the display time for 
the window indicating the completion of 
Auto setup (P46), the guide window 
(P95), the lamp replacement window 
(preparation) (P129), or the...

Setting Various Function
98
Registering a Password
[Other settings] - [Register password]
You can register a password for starting 
projection.
Press the OK button after selecting [Reg-
ister password], and the following screen 
for registering a password appears:
Enter a 4-digit password using [ ] / [] (e.g.,  , 

99Setting Various Function
Setting Up Functions from Menus
■About the Display of the Lamp Counter
The lamp counter displays the hours of 
use of the lamp in the following way:
Less than 1,800 hours
Displayed in green bar.
1,800 – less than 2,000 hours
Displayed in green and yellow bar.
For 1,800 - 1,900 hours, a message 
Obtain a new lamp. appears when power 
is turned on.
Over 2,000 hours
Displayed in green, yellow and red bar.
A message “Replace with the new lamp.” 
appears when power is turned on....

Setting Various Function
100
Resetting to the Default Setting
[Other settings] - [Factory defaults]
You can reset the menu item settings and 
restore the system settings to the factory 
defaults.
Press the OK button after selecting [Fac-
tory defaults], and the following screen for 
confirmation appears:
Press the OK button to accept your setting 
and then press the MENU button.
 This function cannot reset the value of 
[Lamp counter], [Language], [Remote 
control], [Input signal] and [Network set-...