Canon Projector SX80 User Manual

							91Setting the Image Quality
Setting Up Functions from Menus
Reducing the Lamp Brightness
[Lamp mode]
Reducing the lamp brightness reduces 
power consumption and cooling fan noise. 
You can enable or disable this mode also 
with the LAMP button on the remote con-
trol.
Press the OK button to accept your setting 
and then press the MENU button.
 [Normal] is the factory default.
 The setting you have made is stored as 
a setting value of input signals being 
projected in an image mode.
Resetting the Image Settings
[Reset]
You can reset the current image settings to 
the default settings.
Press the OK button to accept your setting 
and then press the MENU button.
 Only the setting of the combined input 
signals being projected and an image 
mode is reset.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
NormalProjects an image at the normal bright-
ness level.
QuietReduces the lamp brightness and cool-
ing fan noise.
Lamp mode
Image adjustment
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
OK
Resets the image settings.
CancelCancels resetting of the image set-
tings.
Reset
Image adjustment 
						

							92
Setting Various Function
Setting Auto Setup Function
[Auto setup]
You can select an items you want to 
enable in the auto setup function.
Select [On] for the items if you want to 
enable in auto setup function.
Press the OK button to accept your setting 
and then press the MENU button.
 The factory default settings are as fol-
lows:
[Auto focus]: [On]
[Auto keystone]: [On]
[Auto input]: [On]
[Auto screen color]: [Off]
 You cannot change any items in [Auto 
setup] if [16:9 D. Image shift] is selected 
for [Screen aspect]. In addition, you 
cannot perform the auto setup function. 
For the details of the [Auto setup], refer 
to the page 45.
Selecting the Power Management Mode
[Power management mode]
You can turn off the lamp or projector auto-
matically for saving power.
Press the OK button to accept your setting 
and then press the MENU button.
 [Off] is the factory default.
 The POWER indicator flashes red and 
green when the projector is in the 
[Standby] power management mode.
 You cannot enable the [Direct power on] 
function (see the next item), if you select 
[Off].
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Auto focusEnables the auto focusing.
Auto keystoneEnables the auto keystone cor-
rection.
Auto inputEnables the auto input selec-
tion.
Auto screen 
colorAdjusts color quality of images 
corresponding to the color of 
the projection screen.
Auto setup
System settings
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
OffDisables the power management 
mode.
StandbyIf no input signal is received for 30 
seconds, the projector enters the 
standby mode, turning off the lamp 
five minutes after start of countdown.
If it receives the input signal or is oper-
ated during such period of 30 sec-
onds, it resumes projection.
ExitIf no input signal is received for 30 
seconds, the projector turns off the 
lamp five minutes after start of count-
down.
Power management mode
System settings 
						

							93Setting Various Function
Setting Up Functions from Menus
Skip the POWER Button Operation
[Direct power on]
You can turn on the projector only by con-
necting the power cable without pressing 
the POWER button.
Press the OK button to accept your setting 
and then press the MENU button.
 [Off] is the factory default.
Enabling/Disabling the Beep
[Beep]
You can select whether a beep sounds or 
not when you operate the projector.
Press the OK button to accept your setting 
and then press the MENU button.
 [On] is the factory default.
 It does not beep if you mute the projec-
tor sound with the MUTE button on the 
remote control.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
OffYou need to press the POWER button to 
turn on the projector.
OnYou can turn on the projector only by 
connecting the power cable.
 Before setting the direct power-on to 
[On], be sure to set the [Power man-
agement mode], described on the 
preceding page, to [Standby] or 
[Exit].
 Wait at least 5 minutes when you 
power on the projector again after 
disconnecting it.
 It may shorten the lamp life if you 
turn on the projector immediately 
after turning it off.
Direct power on
System settings
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
OffDisables the beep.
OnEnables the beep.
Beep
System settings 
						

							Setting Various Function
94
Prohibiting the Projector Operation
[Key lock]
You can prohibit the operation of the projector 
from either the top control or remote control.
Press the OK button to accept your setting 
and then press the MENU button.
 [Off] is the factory default.
Selecting a Display Language
[Language]
You can select the language in which the 
menu is displayed.
Use [ ] / [ ] / [] to select the lan-
guage to be used in the menu, then press 
the OK button.
When the setting is completed, press the 
MENU button.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
OffDisables the key lock.
Main unitProhibit the operation from the 
main unit.
Use the remote control.
Remote 
controlProhibit the operation from the 
remote control.
Use the main unit.
 The key lock function becomes effec-
tive from the moment the OK button is 
pressed after selecting [Main unit] or 
[Remote control]. Be sure to press 
the OK button on the top control or 
remote control which is not locked.
Key lock
System settings
To Unlock Key Lock Function
First, remove the power plug from the AC 
outlet. And insert the power plug while 
holding down the OK button. After a little, 
a beep sounds and key lock is unlocked.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
English
Germany
Fre nch
Italian
Spanish
Portuguese
Swedish
Russian
Dutch
Finnish
Norwegian
Tu r k i s h
Po l is h
Hungarian
Czech
Danish
Arabic
Chinese (Simplified)
Chinese (Traditional)
Korean
Japanese
Language
System settings

						

							95Setting Various Function
Setting Up Functions from Menus
Showing/hiding the Guide Screen
[Guide]
You can select whether to show or hide the 
guide screen which explains operations.
Press the OK button to accept your setting 
and then press the MENU button.
 [On] is the factory default.
 The guide screen is shown when:
- Power is turned off by pressing the 
POWER button (P61).
- No input signal can be detected 
(P44).
- An invalid button is pressed in the 
[BLANK], [FREEZE], or [D.ZOOM] 
mode (P64, 66).
Turning on/off LED Illumination
[LED illumination]
You can select whether to turn on or off 
LED illumination (P26).
Press the OK button to accept your setting 
and then press the MENU button.
 [On] is the factory default.
 LED illumination is unrelated to turning 
on/off of the POWER or WARNING 
lamp.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
OffHides the guide screen.
OnShows the guide screen.
Guide
System settings
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
OffTurns off LEDs.
OnTurns on LEDs.
LED illumination
System settings 
						

							Setting Various Function
96
Setting for Slideshow
[Slideshow interval]
You can project the images stored in a 
PictBridge-compatible device (P104) or a 
USB flash memory (P108) in the slide-
show.
Use [] to set the interval (minutes : 
seconds) of projection (60 minutes = max-
imum).
Set [-- : --] if no slideshow is performed.
When the setting is completed, press the 
MENU button.
 [-- : --] is the factory default.
 The maximum length of slideshow time 
is 60 minutes (60:00).
 Use the USB file browser for the projec-
tion from the USB flash memory. For 
more details, refer to the page 110.
Setting up the Remote Control Channel 
[Other settings] - [Remote control]
You can set different channels to different 
remote controls, if you use two projectors 
at the same time.
Press the OK button to accept your setting 
and then press the MENU button.
 The factory defaults is [Ch1] for both 
projector and remote control.
 After changing the channel on the 
menu, be sure to change the channel of 
the remote control, too.
Selecting a Channel on the Remote Con-
trol
You can change the channel on the 
remote control as follows:
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Slideshow interval
System settings
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Ch1Select the channel of the remote control 
used for this projector, and press the OK 
button. Ch2
Ch1Press the OK button and [ ] for 3 sec-
onds at the same time.
Ch2Press the OK button and [>] for 3 sec-
onds at the same time.
Other settings
System settings
Remote control
< 
						

							97Setting Various Function
Setting Up Functions from Menus
Extending the Menu Display Time
[Other settings] - [Menu display time]
You can extend the menu display time, 
which is 30 seconds usually, to 3 minutes.
Press the OK button to accept your setting 
and then press the MENU button.
 [Normal] is the factory default.
 You cannot extend the display time for 
the window indicating the completion of 
Auto setup (P46), the guide window 
(P95), the lamp replacement window 
(preparation) (P129), or the lamp 
replacement window (warning) (P129).
Setting a Password
[Other settings] - [Password settings]
Disables the projector unless the correct 
password is entered.
Press the OK button to accept your setting 
and then press the MENU button.
 [Off] is the factory default.
 You cannot set [On] unless you have com-
pleted [Register password].
Once you set a password, the password entry 
screen appears at power-on.
Enter a 4-digit password with [ ] / [ ] / [].
If the password is valid, the projection starts. If 
you enter a wrong passwords three times, the 
power will be turned off.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
NormalThe menu is displayed for 30 sec-
onds.
ExtendedThe menu is displayed for 3 minutes.
Other settings
System settings
Menu display time
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
OffThe projector can be used even if no 
password is entered.
OnThe projector cannot be used unless you 
enter your password.
Other settings
System settings
Password settings

						

							Setting Various Function
98
Registering a Password
[Other settings] - [Register password]
You can register a password for starting 
projection.
Press the OK button after selecting [Reg-
ister password], and the following screen 
for registering a password appears:
Enter a 4-digit password using [ ] / [] (e.g.,  , 
						

							99Setting Various Function
Setting Up Functions from Menus
■About the Display of the Lamp Counter
The lamp counter displays the hours of 
use of the lamp in the following way:
Less than 1,800 hours
Displayed in green bar.
1,800 – less than 2,000 hours
Displayed in green and yellow bar.
For 1,800 - 1,900 hours, a message 
Obtain a new lamp. appears when power 
is turned on.
Over 2,000 hours
Displayed in green, yellow and red bar.
A message “Replace with the new lamp.” 
appears when power is turned on.
Initializing network settings
[Other settings] -[Network setting initialization]
You can Initialize the network settings.
Press the OK button after selecting [Net-
work setting initialization], and the follow-
ing screen for confirmation appears:
Press the OK button to accept your setting 
and then press the MENU button.
 Initialized are “IP address” and other 
items set in Connecting the Projector to 
Network (P115).
 You can do this initialization also from a 
Web browser. (P119)
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
Ye sThe network settings is initialized.
NoInitialization is aborted.
Other settings
System settings
Network setting initialization 
						

							Setting Various Function
100
Resetting to the Default Setting
[Other settings] - [Factory defaults]
You can reset the menu item settings and 
restore the system settings to the factory 
defaults.
Press the OK button after selecting [Fac-
tory defaults], and the following screen for 
confirmation appears:
Press the OK button to accept your setting 
and then press the MENU button.
 This function cannot reset the value of 
[Lamp counter], [Language], [Remote 
control], [Input signal] and [Network set-
ting] to default.
 For factory defaults settings, refer to the 
page 146.
HDMICOMPONENT
DIGITAL PCVIDEO/S-VIDEO
ANALOG PCUSB
OKSettings are reset to default.
CancelSettings are not reset to default.
Other settings
System settings
Factory defaults