Canon Projector SX80 User Manual

11Safety Instructions
Safety Instructions
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
 This projector projects intense light from the projection lens. Do not stare directly into 
the lens if possible, as doing so may result in eye damage. Be especially careful that 
children do not stare directly into the beam.
 Install the projector in an appropriate position.
Installing the projector in an inappropriate position may...

Safety Instructions
12
■READ AND KEEP THIS OWNERS MANUAL FOR LATER USE.
All the safety and operating instructions should be read before beginning to operate the 
product.
Read all of the instructions given here and retain them for later use. Unplug this projector 
from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the 
projector. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
 
For added protection of the projector during a...

13Safety Instructions
Safety Instructions
Never push objects of any kind into this projector through cabinet slots as they may touch 
dangerous voltage points or short out parts that could result in a fire or electric shock. 
Never spill liquid of any kind onto the projector.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated using only the type of power source indicated on the 
marking label. If you are not sure of the type of power...

Safety Instructions
14
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirements for use in the 
country you purchased it.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND 
EASILY ACCESSIBLE.
AC Power Cord for the United States and Canada:
The AC Power Cord used in the United States and Canada is 
listed by the Underwriters Laboratories (UL) and certified by the 
Canadian Standard Association (CSA).
The AC Power Cord has a grounding-type AC line plug....

15Safety Instructions
Safety Instructions
Federal Communication Commission Notice
Multimedia Projector, Model: SX80
This device complies with Part 15 of the FCC Rules.  Operation is subject to the 
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may 
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant...

Safety Instructions
16
Precautions on Handling the Batteries in the Remote Controller
Lamp Handling Precautions
This projector uses a high-pressure mercury lamp which must be handled carefully and 
correctly as mentioned below.
The mercury lamp has the following characteristics.
 A lamp may explode with a loud sound or burn out due to a shock, scratch, or use 
beyond its expiry date.
 The lamp life may differ from lamp to lamp and according to the usage environment. 
There is no guarantee that all...

17Safety Instructions
Safety InstructionsCarrying/Transporting the Projector
Installation Precautions
Disposal of Waste Lamp
 Dispose of the projectors mercury lamp according to local regulations just 
like the fluorescent lamps.
 This projector is a precision machine. Do not subject the projector to strong 
shocks or vibrations or turn it down.
 Install the lens cap to protect the lens and put the projector in the carrying 
bag to protect it from dust and scratches on the surface of it when you carry...

Safety Instructions
18
Position the projector in a horizontal position.
 Install the projector correctly. Incorrect 
installation may cause troubles and acci-
dents.
 Do not tilt the projector more than 20 
degrees above and below the horizontal.
 When you want to use your projector point-
ing up or down, make sure to place the projector straight up or down.
 Do not install the projector vertically.
Do Not Use in the Following Environments
 Do not place the projector on an unstable or slanted...

19
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an 
USB Flash Memory
Connecting the Projector to Network
Appendix
Index
Before Use 

20
Supplied Accessories
Check whether the following accessories are supplied with the projector.
■Installing the Lens Cap
As shown in the illustration on the right, put the lens cap 
strap through the hole on the lens cap, and then through 
the lens cap strap insertion hole at the bottom of the pro-
jector.
 When the projector is not in use, attach the lens cap to 
protect the lens.
zRemote controlzBatteries (type AAA, two)
for remote control zComputer connection cable
(DVI/Mini D-sub, 15-pin) (1.8...