Canon projector LXMU800Z User Manual

65
Possible Geometry and Edge Blend Combinations
Some Geometry and Edge Blend settings cannot be used in combination with others. The table below 
shows the possible combinations:
W arping Blending
Keystone
Rotation
Pincushion / Barrel 4-CornersBlanking
White Level Black 
Level
T op/Bottom or 
Left/Right Only
Adjust
Warping Keystone
-X XXO O O
Rotation X-X XO O O
Pincushion / Barrel XX -X O O O
4-Corners XXX -O O O
Blanking OOOO - O O
Blending Whi
te  L eve lT
op/Bottom or Left/
Right Only O
OOOO -O...

66
CONTROL Menu
Network
Auto Power Off
Direct Power On
Startup Logo
Trigger
Auto Search
Dynamic Black
Language
Control IDOff
Off
On
Off
Off
Off
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
LabelDescription
NetworkPress ENTER to enter the Network menu. See “Network Menu” on page 
67.
Auto Power OffPress ◄ or ► to enable or disable turning off the projector when no input 
signal is received within 15 minutes.
Direct Power OnPress ◄ or ► to enable or disable turning on the projector when connect to 
an...

67
Network Menu
Network Mode
Standby Power
DHCP
IP 
Subnet Mask
Gateway
DNS
MAC
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
Projector Control
Off
Off
192.168.0.100
255.255.255.0 0.0.0.0
0.0.0.0
00:18:23:2c:eb:8a
LabelDescription
Network ModePress ◄ or ► to select the network control. The options are Projector 
Control and Service.
Standby Power (*1)Press ◄ or ► to enable or disable the standby power function.
DHCP (*2)Press ◄ or ► to enable or disable DHCP setting.
IPPress ENTER to adjust the...

68
For simplicity and ease of operation, the projector provides diverse net\
working and remote management 
features.
The LAN/RJ45 function of the projector through a network, such as remote\
ly manage: Power On/Off, 
Brightness and Contrast settings. Also, projector status information, such as: Video-Source, etc.
(Ethernet)
The projector can be controlled by a PC (Laptop) or other external dev\
ice with connecting to the 
projector’s LAN/RJ45 port.
Wired LAN Terminal Functionalies
Remote control and...

69
LAN RJ45
1. Connect an LAN cable to the RJ45 port on the projector and the PC (Lapt\
op).
LAN
Projector
Computer
LAN cable
(not included)
Compatible browsers are as follows.
Microsoft Internet Explorer 9 with Adobe Flash Player 9.0 or higher.
2. On the PC (Laptop), select Start → Control Panel → Network and Internet.
 
 
3. Right-click on Local Area Connection, and select Properties.   

70
4. In the Properties window, select the Networking tab, and select Internet Protocol (TCP/IP).
5. Click Properties.
6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK.
7. Press the Menu button on the projector.
8. Select CONTROL → Network.
9. In Network, input the following:
 ■IP Address:  192.168.0.100
 ■Subnet Mask: 255.255.255.0
 ■Gateway: 0.0.0.0
 ■DHCP: Off
10. Press OK to confirm settings.
11. Open a web browser (for example, Microsoft Internet...

71
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
Based on network web-page for the input-string in tools tab, the limitat\
ion for Input-Length is in the 
below list (“space” and the other punctuation key included):
CategoryItemInput-Length
Crestron ControlIP Address15
IP ID3
Port5
ProjectorProjector Name25
Location25
Assigned To25
Network ConfigurationDHCP (Enabled)(N/A)
IP Address15
Subnet Mask15
Default Gateway15
DNS Server15   

72
CategoryItemInput-Length
User PasswordEnabled(N/A)
New Password18
Confirm18
Admin PasswordEnabled(N/A)
New Password18
Confirm18
For more information, please visit http://www.crestron.com/.   

73
RS232 by Telnet Function
Besides projector connected to RS232 interface with “Hyper-Terminal” communication by dedicated 
RS232 command control, there is alternative RS232 command control way, so called “RS232 by 
TELNET” for LAN/RJ45 interface.
Quick Start Guide for “RS232 by TELNET”
Check and get the IP address on OSD of the projector.
Make sure that laptop/PC can access the web-page of the projector.
Make sure that “Windows Firewall” setting to be disabled in case of “TELNET” function filtering out...

74
How to have TELNET enabled in Windows VISTA / 7
By default installation for Windows VISTA, “TELNET” function is not included. But end-user can have it 
by way of “Turn Windows features On or Off” to be enabled.
1. Open Control Panel in Windows VISTA.
2. Open Programs.
3. Select Turn Windows features on or off to open.
4. Have Telnet Client option checked, then press OK button.