Canon projector LXMU800Z User Manual

45
Main MenuSub MenuSetting
ALIGNMENTProjection ModeFront Tabletop / Front Ceiling / Rear Tabletop / Rear Ceiling
Lens ControlPopup menu for Zoom, Focus and Shift control
Lens MemoryMemory 1 / Memory 2 / Memory 3 / Memory 4 / Memory 5 / 
Memory 6 / Memory 7 / Memory 8
Center LensCenter Lens ?OK / Cancel
GeometryAspect Ratio5:4 / 4:3 / 16:10 / 16:9 / 1.88 / 2.35 / 
Letterbox / Auto / True Size
OverscanOff / Crop / Zoom
Digital AlignmentDigital Zoom / Digital Pan / Digital Scan / 
Reset
KeystonePopup menu...

46
Main MenuSub Menu Setting
CONTROL Network Network ModeProjector Control / Service
Standby Power Off / On
DHCP Off / On
IP 192.168.0.100  (Enter to edit)
Subnet Mask 255.255.255.0  (Enter to edit)
Gateway 0.0.0.0  (Enter to edit)
DNS 0.0.0.0  (Enter to edit)
MAC 00:18:23:2c:eb:8a  (example)
Auto Power Of fOff / On
Direct Power On Off / On
Startup Logo Off /  On
T rigger Off / On
Auto Search Off / On
Dynamic Black Off / On
Language English
 / Français / Es paño l / De utsch / Por tu guês  / Nederl ands...

47
Main MenuSub Menu Setting
SER VICE (for 
LX-MU600Z) Model Name
LX-MU600Z
Serial Number DEE300001A (example)
Software V ersion 1 MM01-SD07-FD19 (example)
Software V ersion 2 LD06-22-RP02-3092 (example)
Control / Remote ID X / X
Active Source HDMI (example)
Signal Format 1920x1200 60Hz RB (example)
Pixel Clock 154.00 MHz (example)
H/V Refresh Rate 74.038 KHz / 59.95 Hz (example)
Laser Hours 000100 HRS (example)
Thermal Status Inlet Temperature 25 / 25 (°C)
DMD  Temperature 32 (°C)
Laser  Temperature 33...

48
DISPLAY Menu
HDMI
Input Selection
Test Pattern
Color Space 3D
BackgroundAuto PC Auto
Logo
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
LabelDescription
Input SelectionPress ENTER to enter the Input Selection menu.
Test PatternPress ENTER to display different test patterns for projector installation 
check. Press EXIT or TEST PATTERN to close test pattern.
3DPress ENTER to enter the 3D menu. See “3D Menu” on page 49.
Note:
Before adjusting the 3D setting, ensure the input signal is connected.
Color...

49
3D Menu
HDMI
Test PatternNormal
DISPLAYPICTURELASERALIGNMENTCONTROLSERVICE
Enter
Off
3D
3D Format
DLP Link
3D Swap
LabelDescription
3D Format*Press ENTER to open the 3D Format window. Press ▲ or ▼ to select 
the 3D format. The options are Off, Auto, Side by Side (Half), Top and 
Bottom or Frame Sequential.
Side by Side (Half): Transmission of separate 
images for left and right sides, placed next to 
each other. The image’s horizontal definition is 
halved.LR
Side by Side (Half)
Top and Bottom:...

50
PICTURE Menu
Picture Mode
Brightness
Contrast
Saturation
Hue
Gamma
Color
Color Temperature
White Balance
Sharpness
Noise Reduction
VGA SetupPresentation
100
100
100
100
2.2
Native
10
0
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
LabelDescription
Picture Mode (*1)Press ◄ or ► to select a picture mode. The options are Presentation, 
Standard and Video.
Presentation:  Suitable for viewing text-based images in a bright room.
Standard:   Suitable for projecting a computer screen or watching media...

51
Color Menu
Hue
Saturation
Gain
White GainEnter
Color
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
LabelDescription
HuePress ENTER to enter the Hue menu. Press ▲, ▼, ◄ or ► to adjust 
settings.
SaturationPress ENTER to enter the Saturation menu. Press ▲, ▼, ◄ or ► to adjust 
settings.
GainPress ENTER to enter the Gain menu. Press ▲, ▼, ◄ or ► to adjust 
settings.
White GainPress ENTER to enter the White Gain menu. Press ▲, ▼, ◄ or ► to adjust 
settings.   

52
VGA Setup Menu
V Start
H Start
H Phase
H Total100
100
100
100
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
VGA Setup
LabelDescription
V StartPress ◄ or ► to adjust V Start for the Computer-1 / Computer-2/BNC signal 
display.
H StartPress ◄ or ► to adjust H Start for the Computer-1 / Computer-2/BNC signal 
display.
H PhasePress ◄ or ► to adjust H Phase for the Computer-1 / Computer-2/BNC 
signal display.
H TotalPress ◄ or ► to adjust H Total for the Computer-1 / Computer-2/BNC signal 
display.   

53
LASER Menu
Power Mode
Power Level
High AltitudeNormal
─ ─ ─ ─ ─ 
Auto
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
LabelDescription
Power ModePress ◄ or ► to select a power mode. The options are Normal, Eco or 
Custom.
Power LevelPress ◄ or ► to adjust custom power level. The function is only available 
when Power Mode is Custom. Adjust the power level may change the 
brightness.
High AltitudeThere are two High Altitude mode settings: Auto and High.
Auto:   The rotation rate of the fan is adjusted...

54
ALIGNMENT Menu
Projection Mode
Lens Control
Lens Memory
Center Lens
Geometry
Edge BlendFront Table
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
LabelDescription
Projection ModePress ◄ or ► to select a projection mode. The options are Front Tabletop, 
Front Ceiling, Rear Tabletop and Rear Ceiling.
Lens ControlPress ENTER to enter the Lens Control menu. See “Lens Control Menu” 
on page 55.
Lens MemoryPress ENTER to enter the Lens Memory menu. See “Lens Memory Menu” 
on page 56.
Center LensPress...