Canon projector LXMU800Z User Manual

55
Lens Control Menu
Switch between Lens Shift, Zoom/Focus menus by pressing ENTER button.
Enter to Zoom/Focus
Lens Control
Shift
Enter to Shift
Zoom / Focus
Zoom
Focus
LabelDescription
ZoomPress ▲ or ▼ to adjust zooming of the lens.
FocusPress ◄ or ► to adjust focusing of the lens.
Lens Shift VPress ▲ or ▼ to adjust horizontal shift of the lens.
Lens Shift HPress ◄ or ► to adjust vertical shift of the lens.   

56
Lens Memory Menu
The projector can save information about the lens position in memory. Up to eight sets of lens 
information (including focus, zoom, and lens shift settings) can be sa\
ved, and the lens can be restored 
to these positions.
Lens Memory
Memory 1
Memory 2
Memory 3
Memory 4
Memory 5
Memory 6
Memory 7
Memory 8
Save Item (Press     to switch Load/Reset state)
ENTER key to Save/Load
CLEAR key to Reset
Save
Save
Save
Save
Save
Save
Save
Save
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE...

57
Geometry Menu
Geometry
Aspect Ratio
Overscan
Digital Alignment
Keystone
Rotation
Pincushion / Barrel
Top Left Corner
Top Right Corner
Bottom Left Corner
Bottom Right Corner
Reset
Blanking Auto
Off
0
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
LabelDescription
Aspect RatioPress ◄ or ► to adjust the aspect of the projected image.
5:4:   The image is projected using an input signal aspect ratio of 5:4. Select\
 
5:4 if an image of 5:4 aspect ratio cannot be correctly projected in Auto 
mode.
4:3:...

58
LabelDescription
KeystonePress ▲, ▼, ◄ or ► to adjust horizontal or vertical distortion brought by the 
projection angle.
Keystone Example
1. The projector is positioned at an angle.
2. The resulting image is distorted.
3. The image is corrected.
Keystone Settings
1. To correct the right side of the image
The projector is positioned to the left of the screen.
To correct, apply a positive Horizontal Keystone value pressing ►.
2. To correct the top of the image
The projector is positioned below the...

59
LabelDescription
RotationPress ◄ or ► to rotate the image until it is good position.
Pincushion / BarrelPress ENTER to enter the Pincushion / Barrel menu. Press ▲, ▼, ◄ or ► 
to correct the pincushion distortion.
Top / Bottom Example
Left / Right Example
Top Left CornerApply horizontal / vertical correction as necessary to restore the recta\
ngular 
shape of the image.
Press ENTER to enter the Top Left Corner menu. Press ▲, ▼, ◄ or ► to 
correct the distortion.
Top Left Corner Example
Top Left Corner...

60
LabelDescription
Bottom Right CornerApply horizontal / vertical correction as necessary to restore the recta\
ngular 
shape of the image.
Press ENTER to enter the Bottom Right Corner menu. Press ▲, ▼, ◄ or 
► to correct the distortion.
ResetPress ENTER to set to the default value.
BlankingPress ENTER to enter the Blanking menu. Press ▲, ▼, ◄ or ► to adjust 
the display area. Press ▲ or ▼ to select Reset and press ENTER to set the 
settings to the default values.
Note:
Following functions cannot be...

61
Digital Alignment Menu
Digital Alignment
Digital Zoom
Digital Pan
Digital Scan
Reset 0
0
0
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
LabelDescription
Digital ZoomPress ◄ or ► to enlarge the projected image.
Digital PanPress ◄ or ► to move the projected image horizontally. The function is only 
available when the image is enlarged.
Digital ScanPress ◄ or ► to move the projected image vertically. The function is only 
available when the image is enlarged.
ResetPress ENTER to set to the default...

62
Edge Blend Menu
Edge Blend
Edge Blend
Align Pattern
Blend Width
Black Level
Reset Off
Off
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
LabelDescription
Edge BlendBy combining multiple projectors, a high resolution video can be project\
ed 
on an even bigger screen using the Edge Blend function.
Press ◄ or ► to enable or disable the edge blend function.
Placing two projectors side by side
Projec ted area
Pr ojec ted areaEdge Blending area
Pr ojec tor AP rojector B   

63
LabelDescription
Align PatternMake the overlaps more visible and help adjusting the physical position \
of 
the projectors in the array.
Press ◄ or ► to enable or disable the align pattern function.
Turn on (RIGHT)Turn on (LEFT)
RANGE:
De termine an ar ea of overlapped ed ges of imag es.
POSITION :
(De termine the posion of overlapped ed ges of imag es.)
Mag
enta mark er Magenta mark er
Blend WidthPress ENTER to enter the Blend Width menu. Press ▲, ▼, ◄ or ► to 
adjust settings.
Top / Bottom Example...

64
LabelDescription
Black LevelPress ENTER to enter the Black Level menu. Press ▲, ▼, ◄ or ► to 
adjust settings.
Adjusting the Black Level when placing two projectors side by side
Adjust [CENTER]Adjust [CENTER]
Projector A’s
image Projector B’s
image
Width of overla p
Adjust [ CENTER-RIGHT ]Adjust [ CENTER-LEFT ]
Adjusting the Black Level when placing four projectors side by side(Blend Along Corners)
Adjust [CENTER] Adjust [CENTER]
T
OP - RIGHT
W idth of overla p
Width of overla p
Adjust [CENTER] Adjust...