Canon projector LXMU800Z User Manual

105
2. PICTURE
ItemOperationCommandsValuesNotes
2-1pic.mode= ?0 = Presentation
1 = Standard
2 = Video
Note2
2-2contrast= ? + -0 ~ 200Note2
2-3bright= ? + -0 ~ 200Note2
2-4saturat= ? + -0 ~ 200Note2; Note3
2-5tint= ? + -0 ~ 200Note2; Note3
2-6gamma= ?0 = 1.0
1 = 1.8
2 = 2.0
3 = 2.2
4 = 2.35
5 = 2.5
Note2
2-7-1hsg.r.hue= ? + -0 ~ 200Note2
2-7-2hsg.g.hue= ? + -0 ~ 200Note2
2-7-3hsg.b.hue= ? + -0 ~ 200Note2
2-7-4hsg.c.hue= ? + -0 ~ 200Note2
2-7-5hsg.m.hue= ? + -0 ~ 200Note2
2-7-6hsg.y.hue= ? + -0 ~ 200Note2...

106
ItemOperationCommandsValuesNotes
2-9-6blue.gain= ? + -20 ~ 200Note2
2-10sharp= ? + -0 ~ 15Note2
2-11nr= ? + -0 ~ 3 (Noise Reduction)Note2
2-12-1v.pos= ? + -0 ~ 200Note2; Note4
2-12-2h.pos= ? + -0 ~ 200Note2; Note4
2-12-3h.phase= ? + -0 ~ 200Note2; Note4
2-12-4h.total= ? + -0 ~ 200Note2; Note4
3. LASER
ItemOperationCommandsValuesNotes
3-1laser.mode= ?0 = Eco
1 = Normal
2 = Custom
Note1
3-2laser.cust.pow= ?20 ~ 100Note1
3-3altitude  
(High Altitude)
= ?2 = High
3  = Auto
Note1
3-4laser.hours?
4....

107
ItemOperationCommandsValuesNotes
4-5-3-1h.keystone= ?-600 ~ 600Note1
4-5-3-2v.keystone= ?-400 ~ 400Note1
4-5-4rotation= ?-100 ~ 100Note1
4-5-5-1h.pin.barrel= ?-150 ~ 300Note1
4-5-5-2v.pin.barrel= ?-150 ~ 300Note1
4-5-6-14corner.ulx= ?-192 ~ 192Note1
4-5-6-24corner.uly= ?-120 ~ 120Note1
4-5-6-34corner.urx= ?-192 ~ 192Note1
4-5-6-44corner.ury= ?-120 ~ 120Note1
4-5-6-54corner.llx= ?-192 ~ 192Note1
4-5-6-64corner.lly= ?-120 ~ 120Note1
4-5-6-74corner.lrx= ?-192 ~ 192Note1
4-5-6-84corner.lry= ?-120 ~...

108
ItemOperationCommandsValuesNotes
5-1-4net.ipaddr= ?Note1
5-1-5net.subnet= ?Note1
5-1-6net.gateway= ?Note1
5-1-7net.dhcp= ?0 = Off
1 = On
Note1
5-1-8net.dns= ?Note1
5-2auto.powoff= ?0 = Off
1 = On
Note1
5-3auto.powon= ?0 = Off
1 = On
Note1
5-4startup.logo= ?0 = Off
1 = On
Note1
5-5trig.1= ?0 = Off
1 = On
Note1
5-6auto.src= ?0 = Off
1 = On
Note1
5-7dblack= ?0 = Off
1 = On
Note1
5-8lang= ?0 = English
1 = Français
2 = Español
3 = Deutsch
4 = Português
5 = Nederlands
6 = Italiano
7 = русский
8 = 简体中文
9 =...

109
7. OTHERS
ItemOperationCommandsValuesNotes
7-1power.on(execute)
7-2power.off(execute)
7-3status?1 = warm up
2 = imaging
3 = cooling
4 = error
REMARK: An input command will get back with “NA” when the input command is\
 “Not Applicable” in 
some specific conditions.
Note1: Not applicable in standby mode.
Note2: Not applicable in standby mode or without input signal locked.
Note3: Only valid when source is YUV.
Note4: Only applicable when source is one of Computer-1 and Computer-2/B\
NC.   

CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A. INC.
One Canon Park, Melville, New  York 11 747, U.S.A.
For all inquires concerning this product, call toll free in the U.S. 1-8\
00-OK-CANON
CANON EUROPE LT D.
3  The Square, Stockley Park, Uxbridge, Middlesex, UB 11 1ET United Kingdom
CANON EURO PA N.V.
Bovenkerkerweg 59, 1 185 XB Amstelveen, The Netherlands