Canon projector LXMU800Z User Manual

35
Connecting to the External HDBaseT Transmitter
HDBaseT Tr ansmitte r
RS-232RJ45
RJ45LANYPbP r
VGA IN HDMI
AV Equipment
Projector
Control PCControl PC Computer
Hub
Composite cableHDMI cable
RS-232 cable
LAN 
cable
LAN cable
LAN cable
Computer cable
(not included)(not included)
(not included)
(not included)
(not included)
(not included)
Connecting to the 3G-SDI
Lokalt SDI-displaySDI-display
Ikke-lineær editor
Projektor
SDI-kabel
(ikke inkluderet)  (ikke inkluderet) (ikke inkluderet) 
SDI-kabel...

36
Connecting to the Extended Monitor
Projector
ComputerMonitor
RGB to composite cableComputer cableComputer cable
(not included)
Starting and Shutting down the Projector
1. Connect the power cord to the projector. Connect the 
other end to a wall outlet.
(“Voltage Selection” on page 6 of AC input selected.)
2. Fix the power cord to the power socket of the projector 
with a hook.
3. Turn on the power switch.
4. Make sure the POWER LED displays solid red.
Press the POWER button on the projector or the ON...

37
5. Press the source buttons on the remote control or 
INPUT on the projector to select a desired input signal.
HDMI
Input Selection
HDMI
DVI-D
Computer-1
Computer-2 / BNC
3G-SDI
HDBaseTDISPLAYPICTURELASERALIGNMENT CONTROLSERVICE
6. Press the POWER button on the projector or the OFF 
button on the remote control to show the “Power Off? / 
Press Power again” prompt.
7. Press the POWER button on the projector or the OFF 
button on the remote control to turn off the projector.
Power Off?
Press Power...

38
Adjusting the Focus and Zoom
1. Press FOCUS +/- on the projector or the remote control to sharpen the projected image.
2. Press ZOOM +/- on the projector or the remote control to adjust the size of the image \
(ZOOM + 
increases image size, ZOOM - decreases image size).
MENUEXIT
ENTER
1
4
70
89
6 3
5
2
Adjust the Keystone
1. Press MENU. Press ◄ or ► to navigate to ALIGNMENT.
2. Press ▲ or ▼ until Keystone is selected.
3. Press ENTER to enter keystone control menu.
4. Press ▲, ▼, ◄ or ► to correct...

39
Vertical Lens Shift
The lens on a desk mounted projector can move down to up from 0% to 50% \
(0.5V).
 
Image
Image
L ens Ce nter
V
Max. 0.5V
Max. 0.5 V
Vertical Shif t
The lens of the ceiling mounted projector can move up to down from 0% to\
 50% (0.5V).
Image
Imag e
V
Max. 0.5V Max. 0.5V
Ve
rtical Shif t
Lens Ce nter
 ■The above lens shift range is for LX-IL01UW (ultra wide zoom lens), LX\
-IL02WZ (wide zoom lens), 
LX-IL03ST (standard zoom lens), LX-IL04MZ (middle zoom lens), LX-IL05LZ (lon\
g zoom...

40
Horizontal Lens Shift
The image can be shifted horizontally to the right or left by 10% (0.1H\
) without moving the projector.
 H
0.1H0.1H
Image
Lens Ce nter
V
Max.  0.5V
 ■The above lens shift range is for LX-IL02WZ (wide zoom lens), LX-IL03S\
T (standard zoom lens), 
LX-IL04MZ (middle zoom lens), LX-IL05LZ (long zoom lens), LX-IL06UL (ultra long zoom lens).
 ■The LX-IL07WF (short fixed lens), optical performance guaranteed range is limited at 0% position.
Lens Shift SpecificationVerticalHorizontal...

41
Horizontal Lens Shift for LX-IL01UW (Ultra Wide Zoom Lens)
The image can be shifted horizontally to the right or left by 6.70% (0.067H) without moving the projector.
0.067H
 H
0.067H
Image
Lens Ce nter
V
Max.  0.5V
 ■The above lens shift range is for LX-IL01UW (ultra wide zoom lens).
Lens Shift SpecificationVerticalHorizontal
UpDownLeftRight
Lens Shift Adjust Range60%30%10%20%
Optical performance guaranteed 
range
50%0%6.7%6.7%   

42
On-Screen Display (OSD) Menu Settings
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change\
 various settings.
Navigating the OSD
You can use ▲, ▼, ◄ or ► on the remote control or the projector keypad to navigate and adjust 
settings.
MENUEXIT
ENTER
1
4
70
89
6 3
5
2
1. Press MENU to enter the OSD.
2. There are six menus. Press ◄ or ► to move through the menus.
3. Press ▲ or ▼ to move up and down in a menu. 
4. Press ◄ or ► to change values for settings.
5. Press...

43
Setting the OSD Language
Set the OSD language (default: English) to your preference before cont\
inuing.
1. Press MENU. Press ◄ or ► to navigate to CONTROL.
2. Press ▲ or ▼ until Language is selected. Press ENTER to enter the Language menu.
Network
Auto Power Off
Direct Power On
Startup Logo
Trigger
Auto Search
Dynamic Black
Language
Control ID   
Off
Off
On
Off
Off
Off
   Enter
HDMI
DISPLAYPICTURELASERALIGNMENT
CONTROLSERVICE
3. Press ▲ or ▼ until the language you want is selected.
Language
English...

44
OSD Menu Overview
Main MenuSub MenuSetting
DISPLAYInput SelectionHDMI / DVI-D / Computer-1 / Computer-2/BNC / 3G-SDI / 
HDBaseT
Test PatternWhite / Black / Red / Green / Blue / Checkerboard / CrossHatch 
/ V Burst / H Burst / ColorBar
3D3D FormatOff / Auto / Side by Side (Half) / Top and 
Bottom / Frame Sequential
DLP LinkOff / On
3D SwapNormal / Reverse
Color SpaceAuto / REC709 / REC601 / RGB PC / RGB Video
BackgroundLogo / Black / Blue / White
Auto PCEnter
PICTUREPicture ModePresentation / Standard...