Canon projector LXMU800Z User Manual
Have a look at the manual Canon projector LXMU800Z User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
30
Interlock Switches
This projector has three (top cover x 1, lens x 2) interlocking switch\
es to protect the user from the
unnecessary laser exposure.
12
ItemDescription
1The lens alarm function automatically powers off the projector if the lens is removed or not
installed correctly.
2The intruder alarm function automatically powers off the projector if the top cover is removed.](http://img.usermanuals.tech/thumb/14/1325/w64_projector-lxmu800z-1478292661_d-35.png "Page 36
30
Interlock Switches
This projector has three (top cover x 1, lens x 2) interlocking switch\
es to protect the user from the
unnecessary laser exposure.
12
ItemDescription
1The lens alarm function automatically powers off the projector if the lens is removed or not
installed correctly.
2The intruder alarm function automatically powers off the projector if the top cover is removed.")
![Page 37
31
Precaution for Installing the Projector
The high quality display from the project is only available when the pro\
jector is correctly installed.
Generally, the light source facing the screen should be reduced or eliminated as \
much as possible. The
contrast of the image will be obviously reduced if the light directly sh\
ines on the screen, such as the
beam from windows or the other lighting illumination on the image. The image may become faded and
not bright.
Projector Installation and Setup
The...](http://img.usermanuals.tech/thumb/14/1325/w64_projector-lxmu800z-1478292661_d-36.png "Page 37
31
Precaution for Installing the Projector
The high quality display from the project is only available when the pro\
jector is correctly installed.
Generally, the light source facing the screen should be reduced or eliminated as \
much as possible. The
contrast of the image will be obviously reduced if the light directly sh\
ines on the screen, such as the
beam from windows or the other lighting illumination on the image. The image may become faded and
not bright.
Projector Installation and Setup
The...")
![Page 38
32
Portrait Projection (Vertical Orientation)
The projector can be installed vertically to display computer
images in portrait orientation.
Notes, when installing the projector vertically.
■Allow at least 30 cm(11.8”) clearance around the air
intake vent.
■Prepare an exclusive stand (not included).
Note:
Using the projector in the following situation may accelerate the deteri\
oration of optical parts.
■When the projector is installed on which projection lens faces downward.\
■When the air intake...](http://img.usermanuals.tech/thumb/14/1325/w64_projector-lxmu800z-1478292661_d-37.png "Page 38
32
Portrait Projection (Vertical Orientation)
The projector can be installed vertically to display computer
images in portrait orientation.
Notes, when installing the projector vertically.
■Allow at least 30 cm(11.8”) clearance around the air
intake vent.
■Prepare an exclusive stand (not included).
Note:
Using the projector in the following situation may accelerate the deteri\
oration of optical parts.
■When the projector is installed on which projection lens faces downward.\
■When the air intake...")
![Page 44
38
Adjusting the Focus and Zoom
1. Press FOCUS +/- on the projector or the remote control to sharpen the projected image.
2. Press ZOOM +/- on the projector or the remote control to adjust the size of the image \
(ZOOM +
increases image size, ZOOM - decreases image size).
MENUEXIT
ENTER
1
4
70
89
6 3
5
2
Adjust the Keystone
1. Press MENU. Press ◄ or ► to navigate to ALIGNMENT.
2. Press ▲ or ▼ until Keystone is selected.
3. Press ENTER to enter keystone control menu.
4. Press ▲, ▼, ◄ or ► to correct...](http://img.usermanuals.tech/thumb/14/1325/w64_projector-lxmu800z-1478292661_d-43.png "Page 44
38
Adjusting the Focus and Zoom
1. Press FOCUS +/- on the projector or the remote control to sharpen the projected image.
2. Press ZOOM +/- on the projector or the remote control to adjust the size of the image \
(ZOOM +
increases image size, ZOOM - decreases image size).
MENUEXIT
ENTER
1
4
70
89
6 3
5
2
Adjust the Keystone
1. Press MENU. Press ◄ or ► to navigate to ALIGNMENT.
2. Press ▲ or ▼ until Keystone is selected.
3. Press ENTER to enter keystone control menu.
4. Press ▲, ▼, ◄ or ► to correct...")
![Page 45
39
Vertical Lens Shift
The lens on a desk mounted projector can move down to up from 0% to 50% \
(0.5V).
Image
Image
L ens Ce nter
V
Max. 0.5V
Max. 0.5 V
Vertical Shif t
The lens of the ceiling mounted projector can move up to down from 0% to\
50% (0.5V).
Image
Imag e
V
Max. 0.5V Max. 0.5V
Ve
rtical Shif t
Lens Ce nter
■The above lens shift range is for LX-IL01UW (ultra wide zoom lens), LX\
-IL02WZ (wide zoom lens),
LX-IL03ST (standard zoom lens), LX-IL04MZ (middle zoom lens), LX-IL05LZ (lon\
g zoom...](http://img.usermanuals.tech/thumb/14/1325/w64_projector-lxmu800z-1478292661_d-44.png "Page 45
39
Vertical Lens Shift
The lens on a desk mounted projector can move down to up from 0% to 50% \
(0.5V).
Image
Image
L ens Ce nter
V
Max. 0.5V
Max. 0.5 V
Vertical Shif t
The lens of the ceiling mounted projector can move up to down from 0% to\
50% (0.5V).
Image
Imag e
V
Max. 0.5V Max. 0.5V
Ve
rtical Shif t
Lens Ce nter
■The above lens shift range is for LX-IL01UW (ultra wide zoom lens), LX\
-IL02WZ (wide zoom lens),
LX-IL03ST (standard zoom lens), LX-IL04MZ (middle zoom lens), LX-IL05LZ (lon\
g zoom...")
![Page 46
40
Horizontal Lens Shift
The image can be shifted horizontally to the right or left by 10% (0.1H\
) without moving the projector.
H
0.1H0.1H
Image
Lens Ce nter
V
Max. 0.5V
■The above lens shift range is for LX-IL02WZ (wide zoom lens), LX-IL03S\
T (standard zoom lens),
LX-IL04MZ (middle zoom lens), LX-IL05LZ (long zoom lens), LX-IL06UL (ultra long zoom lens).
■The LX-IL07WF (short fixed lens), optical performance guaranteed range is limited at 0% position.
Lens Shift SpecificationVerticalHorizontal...](http://img.usermanuals.tech/thumb/14/1325/w64_projector-lxmu800z-1478292661_d-45.png "Page 46
40
Horizontal Lens Shift
The image can be shifted horizontally to the right or left by 10% (0.1H\
) without moving the projector.
H
0.1H0.1H
Image
Lens Ce nter
V
Max. 0.5V
■The above lens shift range is for LX-IL02WZ (wide zoom lens), LX-IL03S\
T (standard zoom lens),
LX-IL04MZ (middle zoom lens), LX-IL05LZ (long zoom lens), LX-IL06UL (ultra long zoom lens).
■The LX-IL07WF (short fixed lens), optical performance guaranteed range is limited at 0% position.
Lens Shift SpecificationVerticalHorizontal...")
35 Connecting to the External HDBaseT Transmitter HDBaseT Tr ansmitte r RS-232RJ45 RJ45LANYPbP r VGA IN HDMI AV Equipment Projector Control PCControl PC Computer Hub Composite cableHDMI cable RS-232 cable LAN cable LAN cable LAN cable Computer cable (not included)(not included) (not included) (not included) (not included) (not included) Connecting to the 3G-SDI Lokalt SDI-displaySDI-display Ikke-lineær editor Projektor SDI-kabel (ikke inkluderet) (ikke inkluderet) (ikke inkluderet) SDI-kabel SDI-kabel Broadcast SDI-kamera
36 Connecting to the Extended Monitor Projector ComputerMonitor RGB to composite cableComputer cableComputer cable (not included) Starting and Shutting down the Projector 1. Connect the power cord to the projector. Connect the other end to a wall outlet. (“Voltage Selection” on page 6 of AC input selected.) 2. Fix the power cord to the power socket of the projector with a hook. 3. Turn on the power switch. 4. Make sure the POWER LED displays solid red. Press the POWER button on the projector or the ON button on the remote control to turn on the projector. See “Power LED Indicator” on page 99.
37 5. Press the source buttons on the remote control or INPUT on the projector to select a desired input signal. HDMI Input Selection HDMI DVI-D Computer-1 Computer-2 / BNC 3G-SDI HDBaseTDISPLAYPICTURELASERALIGNMENT CONTROLSERVICE 6. Press the POWER button on the projector or the OFF button on the remote control to show the “Power Off? / Press Power again” prompt. 7. Press the POWER button on the projector or the OFF button on the remote control to turn off the projector. Power Off? Press Power again Note: ■Use the projector’s supplied power cord. ■Confirm the projector’s power requirements before installing to make sure the power supply meets the projector’s specification requirements. ■Turn off this product when not in use to prolong the life of the projecto\ r. Laser life vary depending upon mode selected, environmental conditions, and usage. Brigh\ tness decreases over time. Warning: Do not unplug the power cord and do not turn off the power switch until \ the POWER LED solid red - indicating the projector has cooled down. Adjusting the Projector Level Take note of the following when setting up the projector: ■The projector table or stand should be level and sturdy. ■Position the projector so that it is perpendicular to the screen. ■Ensure the cables are secured and out of the way to avoid tripping on th\ em and prevent damage or injury. To level the projector on the installation surface, turn the tilt-adjuste\ r right or left until the desired angle is achieved.
38 Adjusting the Focus and Zoom 1. Press FOCUS +/- on the projector or the remote control to sharpen the projected image. 2. Press ZOOM +/- on the projector or the remote control to adjust the size of the image \ (ZOOM + increases image size, ZOOM - decreases image size). MENUEXIT ENTER 1 4 70 89 6 3 5 2 Adjust the Keystone 1. Press MENU. Press ◄ or ► to navigate to ALIGNMENT. 2. Press ▲ or ▼ until Keystone is selected. 3. Press ENTER to enter keystone control menu. 4. Press ▲, ▼, ◄ or ► to correct keystone distortion. Keystone Horizontal Vertical0000 0000 When the aspect is set to real in low-resolution mode, OSD may become ou\ t of range depending on the level of Keystone adjustment. See “Keystone” on page 58. Adjusting the Lens Shift The projector has the lens shift feature and the image can be vertically\ adjusted without moving the projector. MENUEXIT ENTER 1 4 7 0 89 6 3 5 2
39 Vertical Lens Shift The lens on a desk mounted projector can move down to up from 0% to 50% \ (0.5V). Image Image L ens Ce nter V Max. 0.5V Max. 0.5 V Vertical Shif t The lens of the ceiling mounted projector can move up to down from 0% to\ 50% (0.5V). Image Imag e V Max. 0.5V Max. 0.5V Ve rtical Shif t Lens Ce nter ■The above lens shift range is for LX-IL01UW (ultra wide zoom lens), LX\ -IL02WZ (wide zoom lens), LX-IL03ST (standard zoom lens), LX-IL04MZ (middle zoom lens), LX-IL05LZ (lon\ g zoom lens), LX-IL06UL (ultra long zoom lens), except LX-IL07WF (short fixed lens). ■The LX-IL07WF (short fixed lens), optical performance guaranteed range is limited at 0% position.
40 Horizontal Lens Shift The image can be shifted horizontally to the right or left by 10% (0.1H\ ) without moving the projector. H 0.1H0.1H Image Lens Ce nter V Max. 0.5V ■The above lens shift range is for LX-IL02WZ (wide zoom lens), LX-IL03S\ T (standard zoom lens), LX-IL04MZ (middle zoom lens), LX-IL05LZ (long zoom lens), LX-IL06UL (ultra long zoom lens). ■The LX-IL07WF (short fixed lens), optical performance guaranteed range is limited at 0% position. Lens Shift SpecificationVerticalHorizontal UpDownLeftRight Lens Shift Adjust Range60%30%10%20% Optical performance guaranteed range 50%0%10%10%
41 Horizontal Lens Shift for LX-IL01UW (Ultra Wide Zoom Lens) The image can be shifted horizontally to the right or left by 6.70% (0.067H) without moving the projector. 0.067H H 0.067H Image Lens Ce nter V Max. 0.5V ■The above lens shift range is for LX-IL01UW (ultra wide zoom lens). Lens Shift SpecificationVerticalHorizontal UpDownLeftRight Lens Shift Adjust Range60%30%10%20% Optical performance guaranteed range 50%0%6.7%6.7%
42 On-Screen Display (OSD) Menu Settings OSD Menu Controls The projector has an OSD that lets you make image adjustments and change\ various settings. Navigating the OSD You can use ▲, ▼, ◄ or ► on the remote control or the projector keypad to navigate and adjust settings. MENUEXIT ENTER 1 4 70 89 6 3 5 2 1. Press MENU to enter the OSD. 2. There are six menus. Press ◄ or ► to move through the menus. 3. Press ▲ or ▼ to move up and down in a menu. 4. Press ◄ or ► to change values for settings. 5. Press MENU to close the OSD or return the previous menu. HDMI Input Selection Test Pattern Color Space 3D Background Auto PC Auto Logo DISPLAYPICTURELASERALIGNMENT CONTROLSERVICE
43 Setting the OSD Language Set the OSD language (default: English) to your preference before cont\ inuing. 1. Press MENU. Press ◄ or ► to navigate to CONTROL. 2. Press ▲ or ▼ until Language is selected. Press ENTER to enter the Language menu. Network Auto Power Off Direct Power On Startup Logo Trigger Auto Search Dynamic Black Language Control ID Off Off On Off Off Off Enter HDMI DISPLAYPICTURELASERALIGNMENT CONTROLSERVICE 3. Press ▲ or ▼ until the language you want is selected. Language English Français Español Deutsch Português Nederlends Italiano Pусский 简体中文 繁體中文 한국어 日本語 HDMI DISPLAYPICTURELASERALIGNMENT CONTROLSERVICE 4. Press MENU three times to close the OSD.
44 OSD Menu Overview Main MenuSub MenuSetting DISPLAYInput SelectionHDMI / DVI-D / Computer-1 / Computer-2/BNC / 3G-SDI / HDBaseT Test PatternWhite / Black / Red / Green / Blue / Checkerboard / CrossHatch / V Burst / H Burst / ColorBar 3D3D FormatOff / Auto / Side by Side (Half) / Top and Bottom / Frame Sequential DLP LinkOff / On 3D SwapNormal / Reverse Color SpaceAuto / REC709 / REC601 / RGB PC / RGB Video BackgroundLogo / Black / Blue / White Auto PCEnter PICTUREPicture ModePresentation / Standard / Video Brightness0 ~ 100 ~ 200 Contrast0 ~ 100 ~ 200 Saturation0 ~ 100 ~ 200 Hue0 ~ 100 ~ 200 Gamma1.0 / 1.8 / 2.0 / 2.2 / 2.35 / 2.5 (Picture Mode: Presentation) 1.0 / 1.8 / 2.0 / 2.2 / 2.35 / 2.5 (Picture Mode: Standard / Video) ColorHueRed / Green / Blue / Cyan / Magenta / Yellow SaturationRed / Green / Blue / Cyan / Magenta / Yellow GainRed / Green / Blue / Cyan / Magenta / Yellow White GainRed / Green / Blue Color Temperature5400K / 6500K / 7500K / 8200K / 9300K / Native White BalanceRed Offset / Green Offset / Blue Offset / Red Gain / Green Gain / Blue Gain Sharpness0 ~ 15 Noise Reduction0 ~ 3 VGA SetupV Start / H Start / H Phase / H Total LASERPower ModeEco / Normal / Custom Power LevelLX-MU800Z: 20% ~ 100% LX-MU600Z: 35% ~ 100% High AltitudeAuto / High Factory Settings are in bold letters.