Canon printer PIXMA MX7600 User Manual

							37
Printing from a Memory Card
Printable Image Data
This machine supports JPEG and TIFF images created by DCF ver. 1.0/2.0 standard compliant 
digital cameras (Exif ver. 2.2/2.21 compliant).
Inserting the Memory Card
1
Turn on the machine.
See “Turning the Machine On and Off” on page 14.
2Attach a card adapter if your memory card 
requires one.
3Open the Card Slot Cover.
Note
Compatible image types are limited to JPEG and TIFF only. Other image or movie types such as RAW 
images cannot be printed.
Caution
When a memory card is inserted into the Card Slot, the  Access lamp (A) is lit. When the  Access lamp is 
flashing, the machine is accessing to the memory card. In this case, do not touch the area around the Card 
Slot.
(A) 
						

							38Printing from a Memory Card
4Insert only one memory card into the Card Slot.
z How to insert 
Insert a memory card with the labeled side facing to the right.
*1Be sure to attach the memory card to the special adapter before inserting it into the Card 
Slot.
*2Use “SD Card Adapter” provided with the card.
5Confirm that the Access lamp has lit up.
6Close the Card Slot Cover.
Card TypeInserting Card
zCompact Flash (CF) Card
zMicrodrive
zxD-Picture Card*1
zSD Secure Digital memory card
zSDHC memory card
zminiSD Card*1
zmicroSD Card*2
zMemory Stick
zMemory Stick PRO
zMemory Stick Duo*1
zMemory Stick PRO Duo*1
zMultiMediaCard
zRS-MMC*1
CautionzThe memory card will stick out of the Card Slot, but do not force it into the slot any further. Doing 
so damages the machine and the memory card.
zMake sure that the memory card is correctly oriented before inserting it into the Card Slot. If you 
force the memory card into the Card Slot in the wrong orientation, you may damage the memory 
card and/or the machine.
The Access lamp 
lights up. 
Insert into the left 
Card Slot.
The Access lamp 
lights up. 
Insert into the left 
Card Slot. 
						

							39
Printing from a Memory Card
Removing the Memory Card
1
Open the Card Slot Cover.
2Make sure that the  Access lamp is lit, then remove the memory card.
Hold the part of the memory card that is  sticking out to remove it from the machine.
Do not remove the memory card while the  Access lamp is flashing.
3Close the Card Slot Cover.
Printing the Photo Displ ayed on the LCD (Display 
photo)
1
Prepare for printing.
(1) Turn on the machine.
See “Turning the Machine On and Off” on page 14.
(2) Load paper.
See “Loading Printing Paper” on page 20.
2Insert the memory card.
(1)Press the  MEMORY CARD  button.
(2) Insert the memory card into the Card Slot.
See “Inserting the Memory Card” on page 37.
3Select the print menu.
(1)Use the  [ or  ] button to select  Display photo, then press the  OK button.
4Select the photo to print.
(1) Use the  [ or  ] button to display a photo to print.
(2) Press the  Color button.
Important
The Access  lamp flashes while the machine is reading or writing data from/to the memory card. 
Removing the memory card or turning off the machine while the  Access lamp is flashing may 
damage the data saved on the memory card. Do not remove the memory card while the  Access 
lamp is flashing.
Note
Changing the Display
You can change the way that photos are displayed when  Display photo is selected. To 
change the display, press the  OK button.
Full-screen view : Shows one photo at full-screen.
Enlarged view : Shows one photo magnified four times. Move the area to show using the 
{, } , [ , or  ] button.
Slide show : Shows next photos automatically.
To return to the regular display mode, press the  OK button. 
						

							40Printing from a Memory Card
5Start printing.
(1)Use the  { or  } button or the Numeric buttons to 
specify the number of copies.
(2) Confirm the page size, media type, and other 
settings.
To change page size, media type, and other 
settings, press the  Settings button. See “Setting 
Items” on page 41.
(3) Press the  Color button.
Using Useful Printing Functions
For details, refer to “Printing Photographs Sa ved on a Memory Card” and “Using Useful Printing 
Functions” in the  User’s Guide on-screen manual.
Multiselect print Prints selected photos, specifying  the number of copies for each photo.
Search When there are a lot of photos saved on the memo ry card, displays and prints only photos shot 
on the specified date or within the specified range of dates.
Tr i m m i n g Edits images displayed on the LCD by cropping them.
Layout print
Prints photos you pasted in the specified layout.
Print all photos Prints all photos saved on the memory card.
Photo Index print Prints an index of all photos saved on a memory card.
DPOF print
Prints according to the Digital Print Order Format  (DPOF) settings on your digital camera, if you 
have specified them.
Captured info
Prints information on photographs at the time of its shooting (Exif info) in the margin of Photo 
index print or selected individual photos.
(1)
(2) 
						

							41 Printing from a Memory Card
Setting Items
Press the Settings button in the memory card mode to change the print settings such as page size, 
media type, and print quality.
zTa b  1
You can specify the settings of the printing paper, bordered/borderless print, date/file no., etc.
(1) Page size
Select the page size of the loaded paper.
(2) Media type
Select the media type of the loaded paper.
(3) Print quality
Adjust the print quality according to the original.
(4) Border
Select bordered or borderless print.
(5) Date/file no.
Select whether to print the shooting date, file no., or not.
Note
zTo change the tab, use the { or } button to select the tab and use the [ or ] button.
zDepending on the functions, some setting items cannot be specified in combination.
zThe print settings are retained even if the machine is turned off.
Note
It is not possible to print both the shooting date and the file no. when Credit card is selected in 
Page size.
Under this condition, even if Print date & file no. is set, only the shooting date will be printed. 
If you want to print the file no., select Print file no. only.
(1)(2)(3)(4)(5) 
						

							42Printing from a Memory Card
zTa b  2
You can optimize photos with the functions below.
(6) Auto image fix
When Auto image fix ON is selected, the scene or person’s face of a shot photo is 
recognized and the most suitable correction for each photo is made automatically. It 
makes a darkened face by backlight brighter to print. It also analyzes a scene such as 
scenery, night scene, person, etc. and corrects each scene with the most suitable color, 
brightness, or contrasts automatically to print.
(7) Red eye correction
Corrects red eyes in portraits caused by flash photography.
(8) Vivid photo
Makes green and blue more lively.
(9) Photo optimizer pro
Automatically optimizes brightness and tone of a photo.
(10) Noise reduction
Reduces the noise on blue areas like the sky as well as on black areas.
(11) Face brightener
Brightens a darkened face on the photo taken against the light.
(12) Image optimizer
Corrects and smooths the jagged contours for printing.
(13) Brightness
Adjusts brightness.
(14) Contrast
Adjusts contrast.
(15) Color hue
Adjusts color hue. For example, you can increase red or yellow to adjust the skin tone.
(16) Effects
Applies special effects to the photo, such as printing in sepia tones or with a sketch 
illustration like effect.
Note
If you are not satisfied with the print result in Auto image fix, select Auto image fix OFF and 
specify each setting item below.
(6)(7)(8)(9)(10)
(11)(12)(13)(14)(15)
(16) 
						

							43
Printing from a Memory Card
Printing by Using the Photo Index Sheet
1
Turn on the machine, and load A4 or Letter-sized plain paper in the Cassette.
See “Turning the Machine On and Off” on page 14 and “Loading Printing Paper” on page 20.
2Press the  MEMORY CARD  button.
3Insert a memory card  into the Card Slot.
See “Inserting the Memory Card” on page 37.
4Use the [ or  ] button to select  Photo Index Sheet , then press the OK button.
5Use the  [ or  ] button to select  Photo Index Sheet print , then press the OK 
button.
6Use the  [ or  ] button to select a range of image s to include in the Photo Index 
Sheet, then press the  OK button.
7Press the  Color button to start printi ng the Photo Index Sheet.
The Photo Index Sheet(s) will be printed.
8Fill in the appropriate circles in the Photo 
Index Sheet.
9Load the type of paper you selected in the 
Photo Index Sheet.
10Use the [ or  ] button to select  Scan sheet 
and print , then press the  OK button.
11Place the Photo Index Sheet face-down on 
the Platen Glass, then press the  OK button. 
						

							44Printing from Your Computer
Printing from Your Computer
This section describes pr ocedure for basic printing.
Printing with Windows
1
Turn on the machine and load the paper in the machine.
See “Turning the Machine On and Off” on page 14 and “Loading Printing Paper” on page 20.
2Create a document or open a file to print  using appropriate application software.
3Select Print on the application software’s  File menu.
4Make sure that  Canon XXX  Printer  (where 
“ XXX ” is your machine’s name) is selected in 
Select Printer , and click Preferences  (or 
Properties ).
5Specify the required settings and click  OK.
When plain paper is sele cted, a message indicating 
that paper will be fed from the Cassette will be 
displayed. When any media type other than plain 
paper is selected, a message indicating that paper 
will be fed from the Rear Tray will be displayed.
Click  OK.
6Click  Print (or OK).
Note
When printing photographs taken by your digital camera, you can perform Borderless Printing in easy 
steps using Easy-PhotoPrint EX. Easy-PhotoPrint EX is provided on the  Setup CD-ROM. Easy-PhotoPrint 
EX supports Exif Print to optimize photographs taken by an Exif-compliant digital camera by using the print 
information recorded at the time of shooting to achieve higher print quality. For details on using Easy-
PhotoPrint EX, refer to the  PC Photo Printing Guide on-screen manual.
Note
For details on the printer driver functions, click  Help or 
Instructions  to view the online help or the  PC Printing 
Guide  on-screen manual.  Instructions is only 
displayed when the on-screen manuals are installed. 
						

							45
Printing from Your Computer
Printing with Macintosh
1
Turn on the machine and load the paper in the machine.
See “Turning the Machine On and Off” on page 14 and “Loading Printing Paper” on page 20.
2Create a document or open a file to print  using appropriate application software.
3Select Page Setup  on the application software’s  File menu. 
4Make sure that your machine’s name is 
selected in  Format for.
5Select the page size of the loaded paper in 
Paper Size .
6Click OK.
7Select  Print on the application software’s  File 
menu.
8Select  Quality & Media  in the pop-up menu.
9Specify the required settings.
When plain paper is selected, the paper source will 
switch to the Cassette. When any media type other 
than plain paper is selected, the paper source will 
switch to the Rear Tray.
10Click Print.
Note
For details on the printer driver functions, click   to 
view the  PC Printing Guide  on-screen manual. If the 
on-screen manuals are not installed, the  PC Printing 
Guide  on-screen manual is not displayed even if   is 
clicked. 
						

							46Scanning Images
Scanning Images
You can scan images from the machine to a com puter without printing them and save them in 
popular image types, such as JPEG, TIFF, bitmaps,  or PDF. The scanned data can be sent to one of 
the computers connected over a network as well as  to a computer connected via USB. If you are 
scanning printed text, you can use the  OCR (Optical Character Recognition) software to convert it to 
text data.
Scanning Methods
You can select from the various scanning methods.
z If You Want to Scan Origin als Easily From the Machine
You can scan originals by using t he Operation Panel on the machine.
See “Scanning Using the Operation Panel on the Machine” on page 47.
z If You Want to Edit or  Print the Scanned Images
MP Navigator EX enables you to edit the sca nned images, such as optimizing or trimming.
You can also start application software from  MP Navigator EX to edit or print the scanned 
images.
For detailed operations of MP Navigator EX, refer to the  Scanning Guide on-screen manual.
zIf You Want to Scan Orig inals with Advanced Settings
ScanGear enables you to scan originals with  advanced settings such as the resolution.
For detailed operations of ScanGear, refer to the  Scanning Guide on-screen manual.
Besides the above-mentioned methods, you can use a TWAIN- or WIA- (Windows Vista and 
Windows XP only) compliant appl ication software and the Control Panel (Windows Vista and 
Windows XP only) to scan original s with this machine. For detailed operations, refer to the  Scanning 
Guide  on-screen manual.