Canon printer PIXMA i850 Series User Manual

							Matte Photo Paper MP-101
111
Printing Media
Matte Photo Paper MP-101
This is a matt water-resistant paper and provides superior color reproduction. It is suitable 
for a variety of printing purposes such as paper crafts, calendars and matt photos. This 
media is available in A4/Letter sizes.
nLoading
¥ A maximum of 10 sheets can be loaded at once.
¥ Load the paper with the glossier side facing up.
¥ Set the Paper Thickness Lever to the left.
Paper Thickness Lever
Print Side
(Glossier Side) 
						

							Matte Photo Paper MP-101
112
Printing Media
nPrinter Driver Settings
¥Media Type: Matte Photo Paper
¥Page Size: Ensure the setting matches the size set in the application.
nHandling of Printed Output
¥ Remove each sheet as soon as it is printed. 
¥ Do not touch the printed surface until the ink is Þxed.
nPrintable Area
With some images the trailing edge of the image may be blurred if printing extends into 
the printable area. Canon recommends that you print within the printing area.
áPrinting Area
Note
äFor photograph and illustration data that you want to print with Borderless 
Printing, create the data by using the same size as the paper size, and 
paste the data so that it fills the editing screen without leaving any margins. 
If you are using an application that allows you to set margins, set the left, 
right, top, and bottom margins to 0 mm. For instructions on setting margins, 
refer to the users manual for your application. 
						

							Transparencies CF-102
113
Printing Media
Transparencies CF-102
This Þlm is ideal for printing presentation material for use with overhead projectors.
nLoading
¥ Place one sheet of plain A4 or Letter paper under the transparencies in the sheet 
feeder.
¥ Set the Paper Thickness Lever to the left.
¥ A maximum of 30 sheets can be loaded at once.
Paper Thickness Lever
Plain Paper
Transparencies 
						

							Transparencies CF-102
114
Printing Media
¥ Although you can print on either side of CF-102, best results can be obtained by 
printing on the side toward which it curls when held by the edge.
nPrinter Driver Settings
¥Media Type: Transparency
¥Page Size: Ensure the setting matches the size set in the application.
nHandling of Printed Output
¥ Remove each transparency as soon as it is printed.
¥ Do not touch the printed surface until the ink is Þxed (approx. 15 minutes).
nPrintable Area
áPrinting Area
Print Side 
						

							T-Shirt Transfers TR-201
115
Printing Media
T-Shirt Transfers TR-201
This paper is used to produce iron-on transfers. The image is printed backwards when 
Media Type is set to T-Shirt Transfer in the printer driver.
Note
äFor the customers in the United States, refer to the Quick Start Guide for 
instructions on using TR-101 T-shirt transfers.
nLoading
¥ Load only one sheet at a time.
¥ If the T-shirt transfer is curled, ßatten it by curling it in the opposite direction.
¥ Load the paper with the side that does not have green lines facing up.
¥ Set the Paper Thickness Lever to the right.
Paper 
Thickness 
Lever 
						

							T-Shirt Transfers TR-201
116
Printing Media
nPrinter Driver Settings
¥Media Type: T-Shirt Transfer
¥Page Size:A4
nHandling of Printed Output
¥ Remove each T-shirt transfer as soon as it is printed.
¥ The T-shirt transfer should be used as soon as it is printed. Refer to the supplied 
instructions for details on how to use this media.
nPrintable Area
áPrinting Area 
						

							Banner Paper
117
Printing Media
Banner Paper
This is long paper that consists of consecutive sheets of A4 or Letter size paper, ideal for 
printing long posters or banners (up to six sheets long).
nPreparation for Printing
¥ When tearing the banner paper, tear off one more sheet than you actually need to print.
¥ The maximum length for one print job is six sheets, so if you will be printing on six 
sheets, tear off a seven-sheet length.
nLoading
1Set the Paper Thickness Lever to the right.
2Load the banner paper with the printing side facing up. Gently fold the 
perforation between the Þrst and second sheets.
Leave the rest of the paper folded up.
Do not pull out the output tray. 
						

							Banner Paper
118
Printing Media
3Place the printer where the printed banner output can hang over the edge 
of the table.
Ensure the ink does not stain the table or ßoor.
Paper Thickness Lever 
						

							Banner Paper
119
Printing Media
nPrinter Driver Settings
¥Media Type: Plain Paper
¥Page Size: When using A4 banner paper: A4
When using letter size banner paper: Letter
¥Copies: Must be set to 1 to print correctly. 
¥ In Windows, select Banner Printing for Printing Type on the Page Setup tab.
¥ On a Macintosh, before creating the document, select Banner Printing in the Page 
Setup dialog box.
nPrintable Area
áPrinting Area 
						

							120
Troubleshooting
Troubleshooting
¥Cannot Install the Printer Driver
¥Print Quality is Poor or Contains Errors
¥Printer Does Not Start or Stops During Print Jobs
¥Paper Does Not Feed Properly or Paper Jams
¥The POWER Lamp Flashes Orange
¥An Error Message is Displayed on the Screen
¥Problems Unique to Windows 
¥Problems Unique to the Macintosh 
Windows
Macintosh