Canon printer PIXMA i850 Series User Manual

							Envelopes
91
Printing Media
Envelopes
Use either European DL or US Com. #10 size envelopes.
nPreparation for Printing
1Press down on all four corners and edges of the envelopes to ßatten them 
as shown below.
2If the envelopes are curled, hold the opposite corners and gently bend 
them in the opposite direction.
Ensure that the ßap of the envelope is perfectly straight. 
						

							Envelopes
92
Printing Media
3If the leading edge of an envelope is puffed up or curled, use a pen to press 
the envelope ßat and sharpen the crease.
The envelopes may jam in the printer if they are not completely ßat and the 
edges are not aligned.
Ensure that no curl or puff exceeds 5 mm (0.2 in).
nUnsuitable Envelopes
¥ Envelopes with an embossed or treated surface 
¥ Envelopes with a double ßap or pressure seals
Press the envelope completely ßat, 
working from the middle to the edge.
* The above illustrations show a side view of the leading edge of the 
envelope. 
						

							Envelopes
93
Printing Media
nLoading
¥ Place envelopes lengthwise with the ßap to the left and the address side facing 
upwards.
¥ Set the Paper Thickness Lever to the right.
¥ Up to 10 envelopes can be loaded at once.
Paper 
Thickness 
Lever 
						

							Envelopes
94
Printing Media
nPrinter Driver Settings
¥Media Type: Envelope
¥Page Size: Select either DL Env. or #10 Env according to the envelope size you 
are using.
¥Orientation: Landscape
nHandling of Printed Output
Remove each envelope as it is printed.
nPrintable Area
áPrinting Area 
						

							High Resolution Paper HR-101N
95
Printing Media
High Resolution Paper HR-101N
This type of paper provides better color reproduction than plain paper. It is suitable for 
printing business documents that feature graphics, and for photographs.
nLoading
¥ Load the paper with the whiter side facing up.
¥ Set the Paper Thickness Lever to the left.
¥ Do not load paper higher than the limit mark. A maximum of 80 sheets can be loaded.
Paper Thickness Lever
Print Side
(Whiter Side) 
						

							High Resolution Paper HR-101N
96
Printing Media
nPrinter Driver Settings
¥Media Type: High Resolution Paper
¥Page Size: Ensure the setting matches the size set in the application.
nHandling of Printed Output
Do not stack more than 50 sheets in the paper output tray. If the output paper is curled, it 
may prevent the next sheet being ejected. In this case, or if the ink takes a long time to 
dry, remove each sheet as soon as it is printed.
nPrintable Area
With some images the trailing edge of the image may be blurred if printing extends into 
the printable area. Canon recommends that you print within the printing area.
áPrinting Area 
						

							Glossy Photo Paper GP-301/GP-301N
97
Printing Media
Glossy Photo Paper GP-301/GP-301N
This media is still thicker than High Resolution Paper with a glossy printing surface to 
produce printouts close to photograph quality.
nLoading
¥ A maximum of 10 sheets can be loaded.
¥ Load the paper with the whiter side facing up.
¥ Set the Paper Thickness Lever to the left.
¥ Do not use the loading support sheet provided with the package.
Paper Thickness Lever
Print Side
(Whiter Side) 
						

							Glossy Photo Paper GP-301/GP-301N
98
Printing Media
nPrinter Driver Settings
¥Media Type: Glossy Photo Paper
¥Page Size: Ensure the setting matches the size set in the application.
nHandling of Printed Output
¥ Remove each sheet as soon as it is printed.
¥ Do not touch the printed surface until the ink is Þxed (approx. two minutes).
nPrintable Area
With some images the trailing edge of the image may be blurred if printing extends into 
the printable area. Canon recommends that you print within the printing area.
áPrinting Area
Note
äFor photograph and illustration data that you want to print with Borderless 
Printing, create the data by using the same size as the paper size, and 
paste the data so that it fills the editing screen without leaving any margins.  
If you are using an application that allows you to set margins, set the left, 
right, top and bottom margins to 0 mm.  For instructions on setting margins, 
refer to the users manual for your application. 
						

							High Gloss Photo Film HG-201
99
Printing Media
High Gloss Photo Film HG-201
This Þlm has an extremely glossy surface, ideal for printing photographs with outstanding 
results.
nLoading
¥ Load only one sheet at a time.
¥ Load the Þlm with the cut corner at the upper right.
¥ If the Þlm is curled, ßatten it by curling in the opposite direction.
¥ Set the Paper Thickness Lever to the left.
Paper 
Thickness 
Lever
Cut Corner 
						

							High Gloss Photo Film HG-201
100
Printing Media
nPrinter Driver Settings
¥Media Type: High Gloss Photo Film
¥Page Size: Ensure the setting matches the size set in the application.
nHandling of Printed Output
¥ Remove each sheet as soon as it is printed.
¥ Do not touch the printed surface until the ink is Þxed.
nPrintable Area
With some images the trailing edge of the image may be blurred if printing extends into 
the printable area. Canon recommends that you print within the printing area.
áPrinting Area