Canon printer PIXMA i850 Series User Manual
Have a look at the manual Canon printer PIXMA i850 Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Glossy Photo Cards FM-101 101 Printing Media Glossy Photo Cards FM-101 This photo-size paper is intended for printing images that cover the entire surface of the card, without a white border. When printing, use the original application software, ZoomBrowser EX/PhotoRecord (for Windows) or ImageBrowser (for Macintosh). nLoading ¥ Load the paper with the glossy side facing up. ¥ Set the Paper Thickness Lever to the left. ¥ A maximum of 20 sheets can be loaded at once. ¥ Do not use the loading support sheet provided with the package. Paper Thickness Lever Print Side (Glossy Side)
Glossy Photo Cards FM-101 102 Printing Media nHandling of Printed Output ¥ Do not stack more than 20 sheets in the paper output tray. ¥ Do not touch the printed surface until the ink is Þxed (approx. two minutes).
Photo Paper Pro PR-101 103 Printing Media Photo Paper Pro PR-101 This is thick paper with a treated surface that enhances gloss and provides superior color reproduction. It is ideal for printing high quality photographs. This media is available in A4/ Letter and 4 x 6 sizes. nLoading ¥ Up to 20 sheets of 4 x 6 size paper can be loaded at once. You may load up to 10 A4/ letter size sheets, but put them in place one at a time to keep them from sticking to each other. ¥ Load the paper with the glossier side facing up. ¥ Set the Paper Thickness Lever to the left. Paper Thickness Lever Print Side (Glossier Side)
Photo Paper Pro PR-101 104 Printing Media nPrinter Driver Settings ¥Media Type: Photo Paper Pro ¥Page Size: Ensure the setting matches the size set in the application. nHandling of Printed Output ¥ Remove each sheet as soon as it is printed. ¥ Do not stack more than 20 sheets of 4 x 6 size paper in the output tray. ¥ Do not touch the printed surface until the ink is Þxed (approx. 30 minutes). Colors in dark images may appear indistinct at Þrst, but become clearer after about 30 minutes. ¥ Images may smudge if you place them in an album before the ink is completely dry. It is recommended that you allow the ink to dry for 24 hours. ¥ Do not attempt to dry the ink with a hairdryer or by exposing printed sheets to direct sunlight. nStoring Printed Output ¥ Do not store or display printouts in hot, damp or humid conditions. Never expose them to heat or direct sunlight. ¥ Store printouts in photo albums, photo frames or presentation binders to protect them from direct exposure to air or sunlight. ¥ Do not mount printouts in an adhesive-type album, as you may not be able to remove them. ¥ Be aware that some types of clear plastic folders and albums may cause the edges of the paper to turn yellow.
Photo Paper Pro PR-101 105 Printing Media nPrintable Area With some images the trailing edge of the image may be blurred if printing extends into the printable area. Canon recommends that you print within the printing area. áPrinting Area Note äFor photograph and illustration data that you want to print with Borderless Printing, create the data by using the same size as the paper size, and paste the data so that it fills the editing screen without leaving any margins. If you are using an application that allows you to set margins, set the left, right, top and bottom margins to 0 mm. For instructions on setting margins, refer to the users manual for your application.
Photo Paper Pro PC-101S 106 Printing Media Photo Paper Pro PC-101S Made of the same material as Photo Paper Pro PR-101, this photo-size paper is intended for printing images that cover the entire surface of the card, without a white border. When printing, use the original application software, ZoomBrowser EX/PhotoRecord (for Windows) or ImageBrowser (for Macintosh). nLoading ¥ Load the paper with the glossy side facing up. ¥ Set the Paper Thickness Lever to the left. ¥ A maximum of 20 sheets can be loaded at once. Paper Thickness LeverGlossy Side
Photo Paper Pro PC-101S 107 Printing Media nHandling of Printed Output Follow the instructions described in Photo Paper Pro PR-101.
Photo Paper Plus Glossy PP-101 108 Printing Media Photo Paper Plus Glossy PP-101 This is a thick paper with a glossy water-resistant coating and provides superior colour reproduction. It is ideal for printing high quality photographs. This media is available in A4/ Letter and 4 ´ 6 sizes. nLoading ¥ Up to 10 sheets of A4/Letter size paper can be loaded at once. ¥ Up to 20 sheets of 4 ´ 6 size paper can be loaded at once. ¥ Load the paper with the glossier side facing up. ¥ Set the Paper Thickness Lever to the left. Paper Thickness Lever Print Side (Glossier Side)
Photo Paper Plus Glossy PP-101 109 Printing Media nPrinter Driver Settings ¥Media Type: Photo Paper Plus Glossy ¥Page Size: Ensure the setting matches the size set in the application. nHandling of Printed Output ¥ Remove each sheet as soon as it is printed. ¥ Colors may slightly change if papers are stacked up before the ink is completely dry. It is recommended that you allow the ink to dry for 24 hours. ¥ Do not attempt to dry the ink with a hair dryer or by exposing printed sheets to direct sunlight. nStoring Printed Output ¥ Do not store or display printouts in hot, damp or humid conditions. Never expose them to heat or direct sunlight. ¥ Store printouts in photo albums, photo frames or presentation binders to protect them from direct exposure to air or sunlight. ¥ Do not mount printouts in an adhesive-type album, as you may not be able to remove them. ¥ Be aware that some types of clear plastic folders and albums may cause the edges of the paper to turn yellow.
Photo Paper Plus Glossy PP-101 110 Printing Media nPrintable Area With some images the trailing edge of the image may be blurred if printing extends into the printable area. Canon recommends that you print within the printing area. áPrinting Area Note äFor photograph and illustration data that you want to print with Borderless Printing, create the data by using the same size as the paper size, and paste the data so that it fills the editing screen without leaving any margins. If you are using an application that allows you to set margins, set the left, right, top, and bottom margins to 0 mm. For instructions on setting margins, refer to the users manual for your application.