Canon printer MAXIFY MB5120 User Manual

CannotInstallMPDrivers
For Windows:
For Mac OS:
ForWindows:

Easy-WebPrintEXDoesNotStartorEasy-WebPrintEXMenuDoesNotAppear(Windows)
If Easy-WebPrint EX does not start or its menu does not appear on Internet Explorer, check the following.
Check1  Is CanonEasy-WebPrintEX  displayed on Toolbars menu in Internet
Explorer's  View menu?
If  CanonEasy-WebPrintEX  is not displayed, Easy-WebPrint EX is not installed on your computer. Install the
latest version of Easy-WebPrint EX from the Canon website.
Note

UpdatingMPDriversinNetworkEnvironment(Windows)
Download the latest MP Drivers.
The latest MP Drivers for your model are available for download on the Canon website.
Uninstall the existing MP Drivers and follow the installation instructions to install the latest MP Drivers that
you downloaded. In the connection method selection screen, select  UsetheprinterwithwirelessLAN
connection  or UsetheprinterwithwiredLANconnection  according to the connection method you use.
The printer is...

ErrorsandMessages
AnErrorOccurs
AMessageforFaxingIsDisplayedonFaxStandbyScreen
MessageAppears
1195 

AnErrorOccursIf an error occurs in printing, for example if the paper runs out or jams, a troubleshooting message appears
automatically. Take the appropriate action described in the message.
If an error occurs, a support code (error number) appears on the computer screen or the touch screen.
WhenaSupportCodeandaMessageAreDisplayedonComputerScreen:

For more on resolving errors with support codes, see List of Support Code for Error.
Note

AMessageforFaxingIsDisplayedonFaxStandbyScreen
If a message is displayed on the Fax standby screen, take the corresponding action described below.
MessageActionAutore-
dialThe printer is waiting to redial the recipient's number because the line was busy or the recipient did not answer when you tried to send a document. Wait for the printer to automatically redial the number. If you want to cancel automatic redialing, wait until the printer starts dialing the number, and then press the...

Set Printwhenoutofink  in Autoprintsettings  under FAXsettings  to Print .
However, part or all of the fax may not be printed since the ink has run out. Also, the contents of the fax will not be stored in the printer's memory.If the ink has already run out, we recommend that  Donotprint be selected for  Receiveddocu-
ments  in Autoprintsettings  under FAXsettings  to store the received fax in the printer's mem-
ory. After you replace the ink tank and select  Print for...

Memory
isfull.The printer's memory is full because it has sent/received too many documents, or a detailed document.
Print the faxes stored in the printer's memory or save them on the USB flash drive, and delete them from the printer's memory.
Document Stored in Printer's Memory
When sending a fax, resend it. If this message still appears, delete the faxes stored in the printer's memo- ry, divide the faxes for sending, and send them again.
When receiving a fax, have the sender resend...