Canon printer MAXIFY MB5120 User Manual

ScanGear(ScannerDriver)ErrorMessagesIf an error message for ScanGear (scanner driver) appears, check the error code and follow the
corresponding solution.ErrorCodeErrorMessageSolution1
4
10
122
151
175
176
177Error in scanner.
Turn off scanner and follow instructions in User's Guide. Scanner driver will be closed.

Please check and try again.
Click [Scanner Selection] if you want to select another
scanner.
Scanner driver will be closed.
152Running out of memory.
Increase available memory.
Scanner driver will be closed.

For how to delete MP Drivers, see
Deleting the Unnecessary MP
Drivers.
250An error has occurred.
Turn the device off and then back on.
Scanner driver will be closed.

FaxingProblems
ProblemsSendingFaxes
ProblemsReceivingFaxes
CannotSendaFaxClearly
TelephoneProblems
1164 

ProblemsSendingFaxes
CannotSendaFax
CannotPerformSequentialBroadcastingbyRedialing,orCannotDialby
EnteringNumbers
ErrorsOftenOccurWhenYouSendaFax
1165 

CannotSendaFax
Check1 Is power turned on?

FAX settings
Check6 Is Dialtonedetect  set to ON?
Resend the fax after a while.
If you still cannot send the fax, select  OFF for Dialtonedetect  in AdvancedFAXsettings  under FAXsettings .
FAX settings
Check7
 Is fax number registered correctly in printer's directory?
Check the recipient's fax/telephone number, correct the fax/telephone number registered in the printer's directory,
and then send the document again.
Changing Registered Information
Note

CannotPerformSequentialBroadcastingbyRedialing,orCannotDialbyEnteringNumbers
Check  Have you already selected recipient from redial history, or already dialed a
number by entering the fax/telephone numbers?
You can dial one recipient by selecting from the redial history or by entering the fax/telephone numbers as the recipient of sequential broadcasting.
If you already have dialed by selecting from the redial history or by entering the fax/telephone numbers, select the recipient from the...

ErrorsOftenOccurWhenYouSendaFax
Check Check telephone line condition or connection.
If the telephone line or connection is poor, reducing the transmission start speed may correct the error.
Reduce the transmission start speed on  TXstartspeed in Adv.communicationsettings  in AdvancedFAX
settings  under FAXsettings .
FAX settings
1169 

ProblemsReceivingFaxes
CannotReceiveaFax,CannotPrintaFax
PrinterDoesNotSwitchAutomaticallybetweenVoiceandFaxCalls
QualityofReceivedFaxisPoor
CannotReceiveaColorFax
ErrorsOftenOccurWhenYouReceiveaFax
1170