Canon printer MAXIFY MB5120 User Manual

1200Cause
Front cover is open.
WhattoDo Close the front cover and wait for a while.
Do not close it while you are replacing an ink tank.
1231 

1309Cause
Paper size that is not compatible with automatic duplex printing is specified.
WhattoDo
The sizes of media suitable for auto duplex printing are A4 and Letter.
Press the printer's  Stop button to cancel printing.
Then change the print settings and retry printing.
1232 

1310Cause
Size of paper may not be compatible with automatic duplex printing.
WhattoDo
The sizes of media suitable for auto duplex printing are A4 and Letter. Make sure paper of the correct size is loaded. Tap  OK on the touch screen to eject the paper and restart printing from the front of the next
piece of paper. The reverse side of the ejected sheet is not printed.
1233 

1319Cause
Size of paper is not compatible with automatic duplex printing.
WhattoDo The sizes of media suitable for auto duplex printing are A4 and Letter.Press the printer's  Stop button to cancel printing.
Then change the print settings and retry printing.
1234 

1575Cause
Ink cannot be correctly detected.
WhattoDo If an ink tank becomes empty, replace it.
An ink tank cannot be replaced until it becomes empty.
Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.
1235 

1600Cause
Ink may have run out.
WhattoDo Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing, tap  OK on the machine with the ink tank
installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The
machine may be damaged if printing is continued under the ink out condition.
Since the information contained in the fax may be lost if it is printed in this condition, the received fax will
not be printed and will be stored...

1660Cause
An ink tank is not installed.
WhattoDo Install the ink tank.
1237 

1688Cause
The ink has run out.
WhattoDoReplace the ink tank and close the front cover.Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to disable the function for detecting the
remaining ink level. Press and hold the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, disabling the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable...

1700Cause
Ink absorber is almost full.
WhattoDo
Tap  OK on the touch screen to continue printing. Contact your nearest Canon service center to request a
repair.
1239 

1701Cause
Ink absorber is almost full.
WhattoDo
Tap  OK on the touch screen to continue printing. Contact your nearest Canon service center to request a
repair.
1240