Canon printer MAXIFY MB5120 User Manual

Perform setup following the instructions on the screen.
1071 

SearchingMachinebyIPAddressorHostNameDuringSetup
(Windows)
If the printer cannot be found on the  SelectPrinter screen, search for the printer by an IP address or host
name. Select  SpecifytheIPaddressandrunthesearch  radio button and click Next. The screen to select
searching criteria appears.1.
Check printer's IP address or host name.
To check the printer's IP Address or host name, print out the network settings information or use the
operation panel to display it.

Select to search for printers by IPv6 address.3.
Searchbyhostname
Select to search for printers by host name. A host name is referred to as LLMNR host name or Bonjour name.
3.
Enter IP address or host name and click  Next.
Machine search starts.
Ifanerrorscreenappears:
Resolve the error according to the instruction on the screen.
If the IP address you entered is already used for another device, follow the procedure below to specify printer's IP address.
1.
Flick HOME screen and tap   Setup ....

IfyouspecifyIPv6address:1.
Tap IPv6 .
2.
Tap OK on the displayed screen.
3.
Tap  Enable/disableIPv6 .
4.
Tap Enable .
The IPv6 address has been specified.
Important

CannotProceedbeyondPrinterConnectionScreen/ConnectCable
Screen
If you cannot proceed beyond the  PrinterConnection screen or the ConnectCable  screen, check the
following.
Check1  Make sure USB cable is securely plugged in to printer and computer.
Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the
back of the printer.
ChecktheitemsbelowonlyifyoucannotproceedbeyondthePrinterConnectionscreen.
Check2  Follow procedure below...

CannotFindMachinewhileUsingWirelessLAN
Check1 Make sure the printer is turned on.
Check2 Is  icon displayed on touch screen?
If the icon is not displayed, tap the icon on the lower left and select  ActivatewirelessLAN on the ChangeLAN
screen.
Check3  Make sure printer setup is complete.
If it is not, perform setup.

Place the wireless router and printer where there are no obstacles between them. Wireless communication
between different rooms or floors is generally poor. Wireless communication can be impeded by building
materials containing metal or concrete. If the printer cannot communicate with the computer over a wireless LAN
due to a wall, place the printer and the computer in the same room.
In addition, if a device like a microwave oven that emits radio waves of the same frequency bandwidth as a wireless router...

CannotFindMachinewhileUsingWiredLAN
Check1 Make sure printer is turned on.
Check2  Is  icon displayed on touch screen?
If the icon is not displayed, tap the icon on the lower left, then select  ActivatewiredLAN on the ChangeLAN
screen.
Check3  Make sure LAN cable is connected properly.
Make sure the printer is connected to the router with the LAN cable. If the LAN cable is loose, connect the cable
properly.
If the LAN cable is connected to the WAN side of the router, connect the cable to the LAN...

NetworkConnectionProblems
MachineSuddenlyCannotBeUsed
NetworkKeyUnknown
AdministratorPasswordSetforMachineUnknown
MachineCannotBeUsedAfterReplacingWirelessRouterorChangingIts
Settings
PrintingIsSlow
CannotAccesstoInternetonWirelessLANfromCommunicationDevice
InkLevelNotShownonPrinterStatusMonitor(Windows)
1080