Canon printer MAXIFY MB2120 User Manual

SettingReceiveModeSet the receiving operation (receiving mode).
For details on how to set the receive mode:
Setting Receive Mode
You can select the appropriate mode.
For details on the selectable receive mode:
About Receive Mode
For details on the advanced settings of the receive mode:
Advanced Settings of Receive Mode
Note

Advanced Settings of Receive Mode

You can specify the number of times the external device rings when incoming.
SettingDRPDRingPattern(USandCanadaonly) If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephone
company, your telephone company will assign two or more telephone numbers with distinctive ring
patterns to your single telephone line, allowing you to have different numbers for fax calls and voice calls using only one telephone line. Your printer will automatically monitor the...

9.Press Back button.
The  Receivemodesettings  screen is displayed.10.
Press OK button.
The  Functionlist  screen is displayed.
905 

SettingSenderInformationYou can set the sender information such as date/time, unit name, and unit fax/telephone number.
About Sender Information
Setting Date and Time
Setting Daylight Saving Time (Summer Time)
Registering User Information
AboutSenderInformation If the unit name and unit fax/telephone number are registered, they are printed with date and time as
sender information on the recipient's fax.
A.
Date and time of transmission
B.
Unit fax/telephone number
C.
Unit name
D.
The registered...

SettingDateandTime
This section describes the procedure to set the date and time.1.
Make sure that printer is turned on.
2.
Select   Setup  on HOME screen.
Using the Operation Panel
3.
Select  Devicesettings , and then press  OK button.
4.
Select  Deviceusersettings , and then press OK button.
5.
Select  Date/timesetting , and then press OK button.
6.
Set date and time.
Use the 
 button to move the cursor under the desired position, and then use the  button to
enter the date and time.
Enter the...

Important

8.
Set date and time when summer time ends.
1.
Set date when summer time ends.
Use the 
 button to change the setting item, use the  button to change the setting, and
then use the  OK button to confirm the selection.
2.
Set time (in 24-hour format) when summer time ends.
Use the 
 button to move the cursor under the desired position, use the  button to enter
the time, and then press the  OK button.
Precede single digits with a zero.
9.
Press  HOME  button to return to HOME screen....

Note