Canon printer imageCLASS MF6595CX User Manual

							
Machine Settings
12-26

ADJUST./CLEANING
13. LARGE PAPER MODESets whether to improve toner fix on large-sized paper.
OFF
ON
–
–
14.  AUTO ADF DRTY ADJ
Sets whether to activate smudge (due to dust or dirt) reduction 
during printing.
When the ADF is dirty, copies may contain unwanted dots or 
lines.
ON
OFF
–
–
15.  MAINTENANCE CODE
This setting is not functional in this model.
REPORT SETTINGS
Setting ItemDescription
1.  SETTINGS*
Sets the report functions. (See Chapter 11, “Appendix,” in the 
Reference Guide.)
1.  TX REPORT
Sets whether the fax transmission report prints out.
PRINT ERROR ONLYPrints a report only when a transmission error occurs.
REPORT WITH TX 
IMAGE
Sets whether to print the first page of the fax under the report.
OFF
ON
–
–
OUTPUT YESPrints a report every time you send a document.
REPORT WITH TX 
IMAGE
Sets whether to print the first page of the fax under the report.
OFF
ON
–
–
OUTPUT NONo report is printed. 
						

							
12-27
Machine Settings

REPORT SETTINGS
2. RX REPORTSets whether the fax reception report prints out.
OUTPUT NO
PRINT ERROR ONLY
OUTPUT YES
–
–
–
3.  ACTIVITY REPORT
Sets whether to automatically print the fax transaction report 
and selects its type.
1.  AUTO PRINT
Sets whether an activity report is printed automatically every 40 
transactions.
OUTPUT YES
OUTPUT NO
–
–
2.  TX/RX SEPARATE
Sets whether an activity report is printed separately for sending 
and receiving or not.
OFF
ON
–
–
2.  LIST PRINT
Prints reports/lists.
1.  ACTIVITY REPORT*
Prints the fax transaction report (max. last 40 transactions) 
manually.
2.  SPEED DIAL LIST*
Prints the list of fax numbers registered for speed dialing.
1. 1-TOUCH LIST
2. CODED DIAL LIST
3. GROUP DIAL LIST
–
–
–
3.  ADD BOOK DETAILS*
Prints the details of speed dialing.
1. 1-TOUCH (DETAILS)
2. CODED (DETAILS)
–
–
4.  USER DATA LIST
Prints the setting list registered in the menu. (See “Printing USER 
DATA LIST,” on p. 12-2.)
*   MF6595cx/MF6595/MF6590 only 
						

							
Machine Settings
12-28

SYSTEM SETTINGS
Setting ItemDescription
1.  DEVICE INFO
Sets device information.
1.  DEVICE NAME
Registers the machine name.
2.  LOCATION
Registers the machine location.
2.  NETWORK SETTINGS****
Sets network setting. (See Chapter 3, “Network (MF6595cx/
MF6595/MF6590/MF6540 Only),” in the Reference Guide.)
1.  TCP/IP SETTINGS
Sets TCP/IP network.
1.  IP ADDRESS AUTO.
Sets whether to automatically set an IP address.
ONEnables an IP address to the machine automatically.
1. DHCP (ON/OFF)
2. BOOTP (OFF/ON)
3. RARP (OFF/ON)
–
–
–
OFFAllocate an IP address to the machine manually.
2.  IP ADDRESS
Registers a fixed IP address to the machine. (See “Software 
Settings with Computer,” in the Starter Guide.)
3.  SUBNET MASK
Registers a fixed subnet mask to the machine.
4.  GATEWAY ADDRESS
Registers a fixed gateway address to the machine.
5.  USE LPD
Sets whether to use LPD as the print application.
ON (PORT NO.)
OFF
–
–
6.  RAW SETTINGS
Sets whether to use RAW as the print application.
ONEnables to use RAW.
1.  PORT NO.
Enters the port number.
2. USE 
BIDIRECTIONAL
Sets whether to use bi-directional communication.
ON
OFF
–
–
OFFDisables to use RAW. 
						

							
12-29
Machine Settings

SYSTEM SETTINGS
7. USE HTTPSets whether to activate HTTP (HyperText Transfer Protocol) for 
the Remote UI.
ON (PORT NO.)
OFF
–
–
8.  SET IP ADD RANGE
Sets whether to restrict the range of IP addresses.
OFFDisables restriction of IP address of computers.
ONEnables restriction of IP address of computers from which data 
(print/fax jobs) can be sent to the machine.
1.  PERMIT/
REJECT
Selects whether to permit or reject access from a specified IP 
address.
REJECT
PERMIT
–
–
2.  SET IP 
ADDRESS
Specifies the IP address range.  and  must be entered for each setting.
1. IP ADDRESS 1
2. IP ADDRESS 2
3. IP ADDRESS 3
4. IP ADDRESS 4
–
–
–
–
9.  RX MAC ADD SET.
Sets whether to activate a MAC address filter.
OFFDisables MAC address filter.
ONSpecifies a MAC address filter to access. MAC address must be 
entered for each setting.
1. PERMIT RX ADD1
2. PERMIT RX ADD2
3. PERMIT RX ADD3
4. PERMIT RX ADD4
5. PERMIT RX ADD5
–
–
–
–
– 
						

							
Machine Settings
12-30

SYSTEM SETTINGS
2. SNMP SETTINGSSets detailed information about SNMP.
1.  USE SNMP
Sets whether to activate SNMP.
ON (PORT NO.)
OFF
–
–
2.  COMMUNITY NAME 1
Sets SNMP community name 1.
3.  COMMUNITY NAME 2
Sets SNMP community name 2.
4.  SNMP WRITABLE 1
Enables computers on the network to access the machine and 
modify its settings.
ON
OFF
–
–
5.  SNMP WRITABLE 2 
Enables computers on the network to access the machine and
modify its settings.
OFF
ON
–
–
3.  DEDICATED PORT
Sets or browses detailed information on the machine with a 
Canon printer driver or utility.
ON
OFF
–
–
4.  ETHERNET DRIVER
Specifies the type of network connection.
1.  AUTO DETECT
Selects the detection method of Ethernet driver.
AUTOSets the machine to determine the communication mode (Half 
duplex/Full duplex) and Ethernet type (10Base-T/100Base-TX) 
automatically.
MANUALSets the communication mode and Ethernet type manually.
1.  DUPLEX
Selects the communication mode.
HALF DUPLEX
FULL DUPLEX
–
–
2.  ETHERNET 
TYPE
Selects the Ethernet type.
10 BASE-T
100 BASE-TX
–
– 
						

							
12-31
Machine Settings

SYSTEM SETTINGS
5. VIEW IP ADDRESSChecks the current network settings.
1.  IP ADDRESS
Checks the IP address.
2.  SUBNET MASK
Checks the subnet mask.
3.  GATEWAY ADDRESS
Checks the gateway address.
6.  STARTUP TIME SET.
Sets the time period required to delay the startup of network 
communications for the machine. (0–300 SEC) (0 SEC)
3.  COMMUNICATIONS*
Sets the facsimile communication.
1.  TX START SPEED
Sets the transmission speed for all sent documents.
(33600 bps, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 14400 bps)
2.  RX START SPEED
Sets the transmission speed for all receivable documents.
(33600 bps, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 14400 bps)
3.  MEMORY LOCK
Sets whether to receive and store all documents in memory 
and not to print automatically. (See Chapter 4, “Sending and 
Receiving (MF6595cx/MF6595/MF6590 Only),” in the Reference 
Guide.)
OFFDisables memory reception.
ONEnables memory reception.
1.  PASSWORD
Registers the password that protects the authority for accessing 
to memory.
2.  REPORT PRINT
Sets whether to print a report on memory reception.
OFF
ON
–
–
3.  MEMORY RX TIME
Sets whether to set a period for memory reception.
OFFDisables setting a period of memory reception.
ONEnables setting a period of memory reception.
1.  MEM RX START 
TIME
Enters the start time.
2.  MEM. RX END 
TIME
Enters the end time. 
						

							
Machine Settings
12-32

SYSTEM SETTINGS
4. REMOTE UI****Sets whether to activate the Remote UI function to operate the 
machine and change settings.
ON
OFF
–
–
5.  ACCESS TO DEST.*
Sets restriction of the access to destinations.
1.  RESTRICT NEW ADD.
Sets whether to restrict registering or changing destinations 
for one-touch and coded speed dialing. Sets whether to restrict 
making calls to the destinations not registered for the speed 
dialing.
OFF
ON*1
*1  You can still make calls using an external phone if all of the following\
 
conditions are met:
•   The machine is in the Sleep mode
•    is set to 
•    is set to 
–
–
2.  FAX DRIVER TX
Sets whether to restrict sending faxes from a computer using 
the fax driver.
ON
OFF
–
–
6.  CHECKING THE LOG
Sets whether to allow displaying the log.
ONEnables confirmation of logs using [System Monitor].
OFFDisables confirmation of logs using [System Monitor].
Activity Report will not be printed automatically.
7.  USE DEVICE USB
Sets whether to restrict jobs through the USB interface.
ON
OFF
–
–
*  MF6595cx/MF6595/MF6590 only
****   MF6595cx/MF6595/MF6590/MF6540 only 
						

							
Appendix

13
Appendix
Specifications ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙13-2
General  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙13-2
Copier  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙13-3
Printer  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙13-4
Facsimile (MF6595cx/MF6595/MF6590 Only)  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙13-4
Telephone (MF6595cx/MF6595/MF6590 Only)  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙13-6
Index  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
13-7 
						

							
Appendix
13-2

Specifications
General
Type●Personal Desktop
Power Source●120–127 V, 60 Hz (Power requirements differ depending 
on the country in which you purchased the product.)
Power Consumption●Max.: Less than 780 W
Warm-up Time●MF6595cx/MF6595: less than 16.0 sec.*
MF6590/MF6540/MF6520: less than 13.5 sec.* (from when 
main power switch is turned on until standby display 
appears, when temperature is 20°C and humidity is 65%)
Warm-up time may differ depending on the condition 
and environment of the machine.
*
Weight●MF6595cx/MF6595 with optional cassette:
Approx. 66.1 lb (30 kg) (including toner cartridge)
MF6595 without optioonal cassete/MF6590/MF6540/
MF6520:
Approx. 54 lb (24.5 kg) (including toner cartridge)
Dimensions●MF6520/MF6540/MF6590 and MF6595 without optional 
cassette:
17 7/8" (H) x 18" (D) x 20 1/2" (W ) (453 mm (H) x 457 mm 
(D) x 520 mm (W ))
MF6595cx and MF6595 with optional cassette: 22 7/8" (H) 
x 18" (D) x 20 1/2" (W ) (581 mm (H) x 457 mm (D) x 520 mm 
(W )) 
Installation Space●30 7/8" (D) x 32 5/8" (W ) (784 mm (D) x 827 mm (W ))
(LGL paper is loaded into Multi-purpose tray and paper 
cassette is opened.) 
						

							
13-3
Appendix

General
Environmental 
Conditions
●Temperature: 59°F–86°F (15°C–30°C)
Humidity: 10%–80% RH 
Display Languages●ENGLISH/FRENCH/SPANISH/PORTUGUESE
Acceptable Documents●» p. 2-2.
Acceptable Paper Stock●» p. 2-8.
Printable Area●» p. 2-10.
Scanning Area●» p. 2-3.
Copier
Scanning Resolution●600 dpi x 600 dpi
Printing Resolution●1200 dpi enhanced x 600 dpi
Magnification●1:1 ± 1.0%, 1:2.00, 1:1.29, 1:0.78, 1:0.64, 1:0.50
Zoom 0.50–2.00, 1% increments
First Copy Time●Platen glass: less than 8 sec. (LTR)
ADF: less than 12 sec. (LTR)
Copy Speed●Direct: LTR 24 cpm
No. of Copies●Max. 99 copies