Canon printer imageCLASS MF6595 User Manual

							
Before Using the Machine
1-6

U [Tone] key
Press to switch from rotary pulse to tone dialing.
V [2 on 1] key
Press to set 2 on 1 copying.
W [Frame Erase] key
Press to set frame erase for copying.
X [Collate] key
Press to set collate copies.
Y Additional Functions key
Press to select or cancel the modes in 
Additional Functions.
Z [2-Sided] key
Press to set two-sided copying or faxing.
a [Enlarge/Reduce] key
Press to enlarge or reduce copy ratio.
b [Density] key
Press to adjust the density for copy or 
documents you send.
c [Image Quality] key
Press to select image quality for copy or fax.
d [Paper Select] key
Press to select a paper source (paper cassette or 
multi-purpose tray). 
						

							
1-7
Before Using the Machine

Fax Operation Panel (MF6595cx/MF6595/MF6590 Only)
A [Direct TX] key
Press to set Direct Sending.
B [Pause] key
Press to insert a pause when entering a fax 
number.
C [Hook] key
Press when you want to dial without lifting the 
handset of the external telephone.
D [Redial] key
Press to redial the last dialed number when fax 
is standing by.
E [Coded Dial] key
Press to specify recipients registered under 
coded speed dialing codes.
F [Address Book] key
Press to search pre-registered recipients under 
one-touch speed dialing keys, coded speed 
dialing codes by name.
G One-Touch Speed Dial keys
Press to specify recipients registered under 
One-Touch Speed Dialing Keys.
H [Delayed TX] key
Press to set Delayed Sending. 
						

							
Before Using the Machine
1-8

LCD (Standby Mode)
Copy Mode
MF6595/MF6590/MF6540/MF6520
01100%LTR
ATEXT
MF6595cx or MF6595 with the 
optional cassette
01100%AUTO
ATEXT
A Zoom ratio
B  Paper size
C  Quantity
D  Density
E  Image quality
●
●
Fax Mode (MF6595cx/MF6595/
MF6590 Only)
12/31/2007MON15:50
FaxOnlySTANDARD
A Date & Time
B  Receive mode
C  Image quality
Scan Mode
SCANNING  MODE
Depending on your needs, you can change the standby display which appear\
s when the main power switch is 
turned on. For details, see “Setting Menu,” on p. 12-6.
When the main power switch is turned on, the LCD displays  until the standby display 
appears.
–
– 
						

							
1-9
Before Using the Machine

Toner Cartridge
The lifetime of the Canon genuine starter toner cartridge which comes with the 
machine is approximately 2,500 pages, the Canon genuine replacement toner 
cartridge is approximately 5,000 pages. The page counts are on the basis of “ISO/IEC 
19752”* when printing A4 size paper with the default print density setting. The level 
of toner consumption varies depending on the type of documents printed. If your 
average document contains a lot of graphics, tables, or charts, the life of the toner 
cartridge will be shorter as they consume more toner. When you are replacing a toner 
cartridge, be sure to use a toner cartridge designed for this product. To purchase 
the Canon genuine replacement toner cartridge, contact your local Canon dealer or 
Canon Customer Care Center (U.S.A.:1-800-828-4040, Canada:1-800-652-2666).
* “ISO/IEC 19752” is the global standard related to “Method for t\
he determination of toner cartridge yield 
for monochromatic electrophotographic printers and multi-function device\
s that may contain printer 
components” issued by ISO (International Organization for Standardiz\
ation).
Toner Cartridge name:
Canon Cartridge 106
Model NameTypeSupported Canon  
Genuine CartridgePrint Yield
MF6500 SeriesBundledCanon Cartridge 106 StarterApprox. 2,500 pages
ReplacementCanon Cartridge 106Approx. 5,000 pages 
						

							
Before Using the Machine
1-10

Maintaining the Toner Cartridge
Keep the toner cartridge away from computer screens, disk drives, and floppy disks. The 
magnet inside the toner cartridge may harm these items.
Avoid locations subject to high temperature, high humidity, or rapid changes in 
temperature.
Do not expose the toner cartridge to direct sunlight or bright light for more than five 
minutes.
Store the toner cartridge in its protective bag. Do not open the bag until you are ready to 
install the toner cartridge in the machine.
Save the toner cartridge’s protective bag in case you need to repack and transport the 
toner cartridge at a later date.
Do not store the toner cartridge in a salty atmosphere or where there are corrosive gases 
such as from aerosol sprays.
Do not remove the toner cartridge from the machine unnecessarily.
Do not open the drum protective shutter on the toner cartridge. Print quality may 
deteriorate if the drum surface is exposed to light or is damaged.
Always hold the toner cartridge by its handle to avoid touching the drum protective 
shutter.
Do not stand the toner cartridge on end, and do not turn it upside down. If toner 
becomes caked in the toner cartridge, it may become impossible to free it even by 
shaking the toner cartridge.
If there is a toner powder leakage, make sure not to inhale or touch the toner powder. If it 
comes in contact with your skin, rinse with cold water using soap. If you feel an irritation 
on your skin or inhale the powder, consult a doctor immediately.
When removing the toner cartridge from the machine, make sure to remove it carefully. If 
not removed with care, the toner powder may scatter and come in contact with your eyes 
and mouth. If this happens, rinse with water and consult a doctor immediately.
Keep the toner cartridge away from small children. If they ingest the toner powder, 
consult a doctor immediately.
Do not disassemble the toner cartridge. The toner powder may scatter and come in 
contact with your eyes and mouth. If this happens, rinse with water and consult a doctor 
immediately.
Do not place the toner cartridge in fire. Toner powder is flammable.
●
●
●
●
●
●
●
●
●
●
●
●
●
● 
						

							
1-11
Before Using the Machine

Telephone Line Setting (MF6595cx/MF6595/MF6590 Only)
Setting the Telephone Line Type
The default setting is .
1 Press [Additional Functions].
2 Press [] or [] to select , then press [OK].
3 Press [] or [] to select , then press [OK]. 
						

							
Before Using the Machine
1-12

4 Press [] or [] to select , then press [OK].
5 Press [] or [] to select the telephone line type, then press [OK].
: Tone dialing
: Pulse dialing
If you do not know the type of telephone line you use, contact your loca\
l telephone company.
6 Press [Stop] to return to the standby mode. 
						

							
1-13
Before Using the Machine

Timer Settings
Setting the Sleep Mode
When the machine remains idle for a certain period of time, it automatically enters the 
Sleep mode. The default settings are  and .
1 Press [Additional Functions].
2 Press [] or [] to select , then press [OK].
3 Press [] or [] to select , then press [OK].
4 Press [] or [] to select , then press [OK]. 
						

							
Before Using the Machine
1-14

5 Press [] or [] to select the desired interval, then press [OK].
You can set the interval from 3 to 30 minutes (in one-minute increments).
You can also enter values using the numeric keys.
6 Press [STOP] to return to the standby mode.
To enter the Sleep mode manually, press [Power] on the operation panel.
The machine will not enter the Sleep mode when:
the machine is in operation
the Processing/Data indicator lights or flashes
a message appears on the display and the Error indicator flashes
a paper jam occurs in the machine
the handset of the external telephone is off the hook*
The machine will leave the Sleep mode when:
you press [Power] on the operation panel
a fax is received
the handset of the external telephone is off the hook*
a print job is sent from a computer, and the print is started
a computer performs a scan through the machine
MF6595cx/MF6595/MF6590 only
–
–
•
•
•
•
•
–
•
•
•
•
•
* 
						

							
1-15
Before Using the Machine

Setting Auto Clear Time
If the machine remains idle for a certain period of time, the display returns to the standby 
mode (Auto Clear function).
1 Press [Additional Functions].
2 Press [] or [] to select , then press [OK].
3 Press [] or [] to select , then press [OK].
4 Press [] or [] to select , then press [OK].