Canon printer imageCLASS MF6595 User Manual

							
PC Faxing
8-4 
						

							
Remote UI

9
Remote UI  
(MF6595cx/MF6595/MF6590/MF6540 Only)
Remote UI ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙9-2 
						

							
Remote UI
9-2

Remote UI
Follow this procedure for Remote UI management.
For details, see Chapter 7, “Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only),” in 
the Reference Guide.
Prepare the NetworkStartup
Set up the machine for use on the 
network, then connect the machine 
and the PC to your network router or 
a hub.
For details, see “Software Settings with Computer,” in the Starter Guide.
Start the web browser, enter the IP 
address of the machine, then press 
[Enter] on the keyboard.
For details on how to check the IP address, see Chapter 6, “Network (MF6595cx/MF6595/MF6590/MF6540 Only),” in the Reference Guide. 
						

							
9-3
Remote UI

Log onOperate the Machine
Select the user mode, then click [OK].
If no password is set, you can log on without entering a password.
Now you can manage the machine on 
the web browser.
For details, see Chapter 7, “Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only),” in the Reference Guide.  
						

							
Remote UI
9-4 
						

							
Maintenance

10
Maintenance
Cleaning the Machine ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙10-2
Exterior  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙10-2
Interior  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙10-3
Fuser Roller  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙10-6
Scanning area  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙10-7
Cleaning the ADF Automatically  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙10-10
Transcription Roller∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙10-11
Replacing the Toner Cartridge  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙10-12
Redistributing Toner  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙10-12
Replacing the Toner Cartridge  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙10-15
Recycling Used Cartridges  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙10-19
The Clean Earth Campaign  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙10-19
U.S.A. PROGRAM  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙10-21
CANADA PROGRAM-CANADA PROGRAMME  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙10-24
Transporting the Machine  ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙\
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙10-26 
						

							
Maintenance
10-2

Cleaning the Machine
Note the following before cleaning your 
machine:
Make sure no document is stored in 
memory, then turn off the main power 
switch and disconnect the power cord.
Use a soft cloth to avoid scratching the 
components.
Do not use tissue paper, paper towels, 
or similar materials for cleaning; they 
can stick to the components or generate 
static charges.
Never use volatile liquids such as thinners, benzene, 
acetone, or any other chemical cleaner to clean 
the machine. These can damage the machine 
components.
Any data stored in the memory, including received 
fax documents, will be deleted about 60 minutes 
after you turn off the main power switch or unplug 
the power cord.
–
–
–
–
–
Exterior
1 Turn off the main power switch 
and disconnect the power cord.
2 Wipe the machine's exterior 
with a clean, soft, lint-free cloth 
dampened with water or diluted 
dishwashing detergent solution.
3 Wait for the machine to dry, then 
reconnect the power cord and turn 
on the main power switch. 
						

							
10-3
Maintenance

Interior
Clean the machine’s print area periodically 
to prevent toner powder and paper dust 
from accumulating inside.
1 Turn off the main power switch 
and disconnect the power cord.
2 Open the left cover.
3 Grasp the blue plastic pull tab (A) 
on the toner cartridge.
Do not touch the rollers and parts which have 
labels “CAUTION! Hot surface avoid contact” 
on. They become very hot during use.
4 Pull the blue plastic pull tab until 
you can easily hold the handle of 
the toner cartridge. 
						

							
Maintenance
10-4

5 Remove the toner cartridge.
Always hold the toner cartridge by its 
handle.
To avoid exposing the toner cartridge to 
light, place it in its protective bag or wrap it 
in a thick cloth.
Do not open the drum protective shutter 
on the toner cartridge. Print quality may 
deteriorate if the drum surface is exposed 
to light or is damaged.
–
–
–
6 Use a clean, soft, dry, lint-free 
cloth to remove any toner or paper 
debris from the machine’s interior.
Do not touch the fixing assembly (A) as it 
becomes very hot during use.
Do not touch the transfer roller (B) as this 
can damage the machine.
If loose toner comes into contact with your 
skin or clothing, wash with cold water. 
Warm water will set the toner.
7 Hold the toner cartridge by its 
handle.
The arrows (A) on the toner cartridge should 
be pointing toward the machine.
–
–
– 
						

							
10-5
Maintenance

8 Insert the toner cartridge into the 
machine as far as it will go.
The left edge (A) and the right side 
protrusions (B, C) of the toner cartridge 
should be aligned with on the guides inside 
the machine.
9 Push the toner cartridge to make 
sure it is properly set in the 
machine.
Do not touch the fixing assembly (A) as it 
becomes very hot during use.
10 Close the left cover.
Be careful not to get your fingers caught.
If you cannot close the left cover, do not 
force it to close. Open the cover and make 
sure the toner cartridge is properly set in 
the machine.
11 Reconnect the power cord and 
turn on the main power switch.
–
–