Canon printer imageCLASS MF6580 User Manual
Have a look at the manual Canon printer imageCLASS MF6580 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
13-34 Machine Settings 4. ETHERNET DRIVER Specifies the type of network connection. 1. AUTO DETECT Selects the detection method of Ethernet driver. AUTO Sets the machine to determine the communication mode (Half duplex/Full duplex) and Ethernet type (10Base-T/ 100Base-TX) automatically. MANUAL Sets the communication mode and Ethernet type manually. 1. DUPLEX Selects the communication mode. – HALF DUPLEX – FULL DUPLEX 2. ETHERNET TYPESelects the Ethernet type. – 10 BASE-T – 100 BASE-TX 5. VIEW IP ADDRESS Checks the current network settings. 1. IP ADDRESS Checks the IP address. 2. SUBNET MASK Checks the subnet mask. 3. GATEWAY ADDRESSChecks the gateway address. 6. STARTUP TIME SET. Sets the time period required to delay the startup of network communications for the machine (0-300 sec.). SYSTEM SETTINGS
13-35 Machine Settings 3. COMMUNICATIONS* Sets the facsimile communication. 1. TX START SPEED Sets the transmission speed for all sent documents. (33600 bps, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 14400 bps) 2. RX START SPEED Sets the transmission speed for all receivable documents. (33600 bps, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 14400 bps) 3. MEMORY LOCK Sets whether to receive and store all documents in memory and not to print automatically. (See Chapter 1, “Advanced Fax Features,” in the Advanced Guide.) OFF Disables memory reception. ON Enables memory reception. 1. PASSWORD Registers the password that protects the authority for accessing to memory. 2. REPORT PRINT Sets whether to print a report on memory reception. –OFF –ON 3. MEMORY RX TIME Sets whether to set a period for memory reception. OFF Disables setting a period of memory reception. ON Enables setting a period of memory reception. 1. MEM RX START TIMEEnters the start time. 2. MEM. RX END TIMEEnters the end time. SYSTEM SETTINGS
13-36 Machine Settings* MF6550/MF6560/MF6580 Only **** MF6580 Only 4. REMOTE UI**** Sets whether to activate the Remote UI function to operate the machine and change settings. –ON –OFF 5. ACCESS TO DEST.* Sets restriction of the access to destinations. 1. RESTRICT NEW ADD. Sets whether to restrict registering or changing destinations for one-touch and coded speed dialing. Sets whether to restrict making calls to the destinations not registered for the speed dialing. –OFF –ON* 1 *1You can still make calls using an external phone if all of the following conditions are met: The machine is in Sleep mode is set to is set to 2. FAX DRIVER TX Sets whether to restrict sending faxes from a computer using the fax driver. –ON –OFF 6. CHECKING THE LOG Sets whether to allow displaying the log. ON Enables confirmation of logs using [System Monitor]. OFF Disables confirmation of logs using [System Monitor]. Activity Report will not be printed automatically. 7. USE DEVICE USB Sets whether to restrict jobs through the USB interface. –ON –OFF SYSTEM SETTINGS
14-1 Appendix Appendix Specifications General ●Ty p e Personal Desktop ● Power Source 120 V-127 V, 50/60 Hz (Power requirements differ depending on the country in which you purchased the product.) ● Power Consumption Approx. 780 W (max.) ● Warm-up Time MF6530/MF6531/MF6550: less than 13.5 sec.* MF6560/MF6580: less than 16.0 sec.* (temperature: 68°F (20°C), humidity: 65%; from when the machine turns on the power main switch until the standby display appears) * Warm-up time may differ depending on the condition and environment of the machine. ● Weight Approx. 52.2 lb (23.7kg) (including toner cartridge) ● Dimensions 17 7/8 (H) x 18 (D) x 20 1/2 (W) (453 mm (H) x 457 mm (D) x 520 mm (W)) 22 7/8 (H) x 18 (D) x 20 1/2 (W) (581 mm (H) x 457 mm (D) x 520 mm (W)) (with optional cassette) ● Installation Space 38 3/4 (D) x 40 3/8 (W) (984 mm (D) x 1027 mm (W)) ● Environmental Conditions Temperature:59°F–86°F (15°C–30°C) Humidity: 10%–80% RH ● Display Languages English/French/Spanish/Portuguese ● Acceptable Documents » p. 2-1.
14-2 Appendix ●Acceptable Paper Stock» p. 3-1. ●Printable Area» p. 3-3. ●Scanning Area» p. 2-3. Copier ●Scanning Resolution600 dpi x 600 dpi ●Printing Resolution1200 dpi enhanced x 600 dpi ●Magnification1:1 ± 1.0%, 1:2.000, 1:1.290, 1:0.780, 1:0.640, 1:0.500 Zoom 0.500 - 2.000, 1% increments* * Not available for MF6531 ●First Copy TimePlaten glass: less than 8 sec. (LTR) ADF: less than 12 sec. (LTR) ●Copy SpeedDirect: LTR 23 cpm ●No. of CopiesMax. 99 copies General
14-3 Appendix \ Printer ●Printing MethodIndirect electrostatic method (On-demand fixing) ●Paper Handling–Paper cassette: 500 sheets x 1 cassette (22 lb (80 g/m 2)) –Multi-purpose tray: 100 sheets (22 lb (80 g/m 2)) ●Paper Delivery100 sheets (18 to 22 lb (64 to 80 g/m 2)) ●Print SpeedSee “Copy Speed,” on p. 14-2. ●Printing Resolution1200 dpi enhanced x 600 dpi ●Number of Tones256 ●Printing Cartridge» p. 1-7. Facsimile (MF6550/MF6560/MF6580 Only) ●Applicable LinePublic Switched Telephone Network (PSTN)*1 ●CompatibilityG3 ●Data Compression SchemesMH, MR, MMR, JBIG ●Modem Speed33.6 Kbps Automatic fallback ●Transmission SpeedApprox. 3 seconds/page* 2 at 33.6 Kbps, ECM-JBIG, transmitting from the memory ●Transmission/ Reception MemoryMF6550: Maximum approx. 256 pages* 2 MF6560/MF6580: Maximum approx. 1536 pages*2 (total pages of transmission/reception)
14-4 Appendix ●Fax ResolutionFINE: 203 pels/in. x 196 lines/in. (8 pels/mm x 7.7 lines/mm) PHOTO: 203 pels/in. x 196 lines/in. (8 pels/mm x 7.7 lines/mm) SUPER FINE: 203 pels/in. x 392 lines/in. (8 pels/mm x 15.4 lines/mm) ULTRA FINE: 406 pels/in. x 392 lines/in. (16 pels/mm x 15.4 lines/mm) STANDARD: 203 pels/in. x 98 lines/in. (8 pels/mm x 3.85 lines/mm) ●Dialing– Speed dialing One-touch speed dialing (23 destinations) Coded speed dialing (100 destinations) Group dialing (122 destinations) Address Book dialing (with Address Book key) – Regular dialing (with numeric keys) – Automatic redialing – Manual redialing (with Redial key) – Sequential broadcast (124 destinations) – Automatic reception – Remote reception by telephone (Default ID: 25) – ACTIVITY REPORT (after every 40 transactions) – TX (Transmission)/RX (Reception) REPORT – TTI (Transmit Terminal Identification) Facsimile (MF6550/MF6560/MF6580 Only)
14-5 Appendix *1The Public Switched Telephone Network (PSTN) currently supports 28.8 Kbps modem speed or lower, depending on telephone line conditions. * 2Based on ITU-T Standard Chart No. 1, JBIG standard mode. NOTE Specifications are subject to change without notice. Telephone (MF6550/MF6560/MF6580 Only) ●ConnectionExternal telephone/answering machine (CNG detecting signal)/data modem
14-6 Appendix Index Symbols & Numerics 2 on 1 key 1-4 A Additional Functions key 1-4 Address Book key 1-5 ADDRESS BOOK SET. 13-18 ADF 1-1, 2-6 ADJUST./CLEANING 13-26 Auto clear time 1-12 Automatic document feeder 1-1 C CHECK DOCUMENT message 12-1 Cleaning machine 11-1 Exterior 11-1 Fuser roller 11-4 Interior 11-2 Scanning area 11-5 Cleaning the ADF automatically 11-8 Clear key 1-4 Clearing Jams 12-1 Coded Dial key 1-5, 4-33 Coded speed dialing 4-6 Deleting 4-21 Editing 4-18 Registering 4-15 Using 4-33 Collate key 1-4 COMMON SETTINGS 13-5 Components 1-1 COPY key 1-3 COPY SETTINGS 13-10 Copying 6-1Customer support Canada xvi U.S.A xvi D Daylight saving time 1-14 Delayed TX key 1-5 Density Copying 6-4 Faxes 4-5 Density key 1-4 Direct Sending 4-36 Direct TX key 1-5, 4-36 Document Jams 12-1 Loading 2-4 Requirements 2-1 Scanned area 2-3 Document delivery tray 1-1 Document feeder tray 1-1 E Enlarge/Reduce key 1-4 Error codes 12-12 Error indicator 1-4 F FAX key 1-3 FAX SETTINGS 13-12 Faxes Receiving 5-1 Sending 4-1 Frame Erase key 1-4
14-7 Appendix G Group dialing 4-6 Adding destination 4-26 Changing name 4-29 Deleting destination 4-27 Deleting group 4-30 Registering 4-23 Using 4-32 H Handling xiii Hook key 1-5, 4-35 I If a Power Failure Occurs 12-14 If You Cannot Solve a Problem 12-15 Image quality Copying 6-3 Faxes 4-3 Image Quality key 1-4 J Jam location indicator 1-3, 12-1 Jams Document 12-1 Paper 12-3 L LCD 1-3, 1-6 Messages 12-6 Left cover 1-2 Legal 3-1 Letter 3-1 Loading Document 2-4 Envelopes 3-5 Paper 3-5 Location xiv M Machine settings 13-1 Main power switch 1-2 Maintenance xiii, 11-1 Manual Sending 4-34 Menu Accessing 13-3 Setting 13-5 Multi-purpose tray 1-2, 3-5 Multi-purpose tray extension 1-2, 3-6 N Numeric keys 1-3 O OK key 1-3 ON/OFF key 1-4 One-touch speed dial keys 1-5 One-touch speed dialing 4-6 Deleting 4-13 Editing 4-10 Registering 4-7 Using 4-32 Operation panel 1-1, 1-3 P Paper Guidelines 3-4 Jams 12-3 Loading 3-5 Printable area 3-3 Requirements 3-1 Paper cassette 1-1 Paper delivery tray 1-1 PAPER JAM message 12-3 Paper Select indicator 1-3 Paper select key 1-4 Pause key 1-5 PC Faxing 9-1 Platen glass 1-2, 2-4